component

TL062CDR

Public Made by Adom

by adom

Texas Instruments FET InputAmplifiers, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentop-amp-cmptl062cdr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tl062cdr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
package.json Publish 0.2.0 · Ray 1mo ago
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
page.json Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") · Ray 11d ago
README.md tl062cdr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 15d ago
tl062cdr-etched.fit.json tl062cdr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
tl062cdr-etched.glb tl062cdr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
tl062cdr-etched.step tl062cdr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
tl062cdr.glb Publish 0.1.0 · Ray 1mo ago
tl062cdr.kicad_mod Publish 0.1.0 · Ray 1mo ago
tl062cdr.kicad_sym Publish 0.1.0 · Ray 1mo ago
tl062cdr.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect and oval pad as a SQUARE EAGLE smd; this carries the real pad shape across (0 -> 8 rounded pads) and stops dropping geometry drawn on KiCad User.N layers. Attributes, connects, pads and the pin-1 marker are gated against decreasing and are unchanged. · Ray 1mo ago
tl062cdr.step Publish 0.1.0 · Ray 1mo ago

TL062CDR

Texas Instruments · FET InputAmplifiers · SOIC-8

TL062CDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Amplifier 1 output. Class-AB output stage with short-circuit protection; can drive loads to within a few volts of the supply rails.
2 1IN- input Amplifier 1 inverting (negative) input. High-impedance JFET input; input bias current typically in the pA range.
3 1IN+ input Amplifier 1 non-inverting (positive) input. High-impedance JFET input; common-mode range includes VCC+.
4 VCC- power_in Negative supply rail. Recommended operating range -5 V to -15 V (absolute max -18 V). Tied to GND for single-supply operation.
5 2IN+ input Amplifier 2 non-inverting (positive) input. High-impedance JFET input; common-mode range includes VCC+.
6 2IN- input Amplifier 2 inverting (negative) input. High-impedance JFET input; input bias current typically in the pA range.
7 2OUT output Amplifier 2 output. Class-AB output stage with short-circuit protection; can drive loads to within a few volts of the supply rails.
8 VCC+ power_in Positive supply rail. Recommended operating range +5 V to +15 V (absolute max +18 V). Bypass with a 100 nF ceramic close to the pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • TL062CDRD
  • TL062CDR
  • TL062CDRP
  • TL062CDRJG
  • TL062CDRPS
  • TL062CDRPW
  • TL062CDRFK

CAD (KiCad official)

  • Symbol: TL062CDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tl062cdr-etched.step / tl062cdr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl062cdr.step / tl062cdr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
tl062cdr.step 122 KB You want the bare part, or you mark your own boards.
tl062cdr-etched.step 1.8 MB You want the part with TL062CDR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 440 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (52 pp, sha256 c5d08beb1f4c176d, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF