# TL062

**Texas Instruments** · Operational Amplifier · SOIC-8

The TL062 is a dual low-power JFET-input operational amplifier. It combines high input impedance and low bias current of JFET inputs with low supply current, suiting battery-powered active filters, sensor buffering, and general signal conditioning where power budget matters. It is the low-power member of the TL06x/07x/08x family.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Amplifier 1 output. Short-circuit protected; can source/sink current to drive typical op-amp loads. Slew rate 3.5 V/µs typical. |
| 2 | 1IN- | input | Amplifier 1 inverting (negative) input. JFET input stage - high input impedance and low input bias current. |
| 3 | 1IN+ | input | Amplifier 1 non-inverting (positive) input. JFET input stage; common-mode range includes VCC+. Input voltage magnitude must not exceed the supply magnitude or 15 V, whichever is less. |
| 4 | VCC- | power_in | Negative supply rail. Recommended -5 V to -15 V (absolute max -18 V). Shared by both amplifiers. |
| 5 | 2IN+ | input | Amplifier 2 non-inverting (positive) input. JFET input stage; common-mode range includes VCC+. |
| 6 | 2IN- | input | Amplifier 2 inverting (negative) input. JFET input stage - high input impedance and low input bias current. |
| 7 | 2OUT | output | Amplifier 2 output. Short-circuit protected; can source/sink current to drive typical op-amp loads. |
| 8 | VCC+ | power_in | Positive supply rail. Recommended 5 V to 15 V (absolute max 18 V). Shared by both amplifiers. |

## Key specifications

| Parameter | Value |
|---|---|
| Type | Dual low-power JFET-input op-amp |
| Supply voltage | +-3 V to +-18 V |
| Supply current | 200 uA/amp typ |
| Input bias current | 30 pA typ |
| Slew rate | 3.5 V/us typ |
| Gain-bandwidth product | 1 MHz typ |
| Operating temperature | 0 C to 70 C |

## Ordering variants

Same part, different packaging or reel option.

- `TL062D`
- `TL062P`
- `TL062PS`
- `TL062JG`
- `TL062PW`
- `TL062FK`

## CAD (KiCad official)

- Symbol: `tl062.kicad_sym`
- Footprint: `tl062.kicad_mod`
- 3D model: SOIC-8 body from KiCad `Package_SO/SOIC-8_3.9x4.9mm_P1.27mm`.
- 3D model files: `tl062-etched.step` / `tl062-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tl062.step` / `tl062.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tl062.pdf) (58 pp, sha256 `8b4d9405b319a9d3`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/tl062-datasheet.pdf)