main
History Download
Ray tl061idt: specified limits as data (metadata.characteristics, 28 rows from the datasheet) f5c5591

TL061IDT

STMicroelectronics · FET Input Amplifiers · SO-8

TL061IDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Offset null 1 input Offset null 1 terminal for adjusting input offset voltage to zero; external potentiometer configuration shown in Figure 2.
2 Inverting input input Inverting input terminal, maximum ±15 V input voltage with respect to ground.
3 Non-inverting input input Non-inverting input terminal, maximum ±15 V input voltage with respect to ground.
4 VCC- power_in Negative supply voltage, -18 V absolute maximum.
5 Offset null 2 input Offset null 2 terminal for adjusting input offset voltage to zero; external potentiometer configuration shown in Figure 2.
6 Output output Output terminal with infinite short-circuit protection to ground or either supply.
7 VCC+ power_in Positive supply voltage, +18 V absolute maximum.
8 N.C. unconnected Not connected.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage (RS = 50Ω), Tamb = +25°C Vio 3 6 mV RS = 50Ω, Tamb = +25°C 4
Input offset voltage (RS = 50Ω), Tmin ≤ Tamb ≤ Tmax Vio 9 mV RS = 50Ω, Tmin ≤ Tamb ≤ Tmax 4
Input offset current, Tamb = +25°C Iio 5 100 pA Tamb = +25°C 4
Input offset current, Tmin ≤ Tamb ≤ Tmax Iio 10 nA Tmin ≤ Tamb ≤ Tmax 4
Input bias current, Tamb = +25°C Iib 30 200 pA Tamb = +25°C 4
Input bias current, Tmin ≤ Tamb ≤ Tmax Iib 20 nA Tmin ≤ Tamb ≤ Tmax 4
Input common mode voltage range Vicm -12 15 V 4
Output voltage swing, Tamb = +25°C Vopp 20 27 V RL = 10kΩ, Tamb = +25°C 4
Output voltage swing, Tmin ≤ Tamb ≤ Tmax Vopp 20 V RL = 10kΩ, Tmin ≤ Tamb ≤ Tmax 4
Large signal voltage gain, Tamb = +25°C Avd 4 6 V/mV RL = 10kΩ, Vo = ±10V, Tamb = +25°C 4
Large signal voltage gain, Tmin ≤ Tamb ≤ Tmax Avd 4 V/mV RL = 10kΩ, Vo = ±10V, Tmin ≤ Tamb ≤ Tmax 4
Common mode rejection ratio CMR 80 86 dB RS = 50Ω 4
Supply voltage rejection ratio SVR 80 95 dB RS = 50Ω 4
Supply current, no load ICC 200 250 μA Tamb = +25°C, no load, no signal 4
Total power consumption PD 6 7.5 mW Tamb = +25°C, no load, no signal 4
Slew rate SR 1.5 3.5 V/μs Vi = 10V, RL = 10kΩ, CL = 100pF, Av = 1 4
Supply voltage range VCC 6 36 V 3
Operating free-air temperature range (TL061I) Toper -40 105 °C TL061I grade 3
Supply voltage VCC -18 18 V Printed as ±18 V, referenced to midpoint of VCC+ and VCC- 3
Input voltage Vi -15 15 V Magnitude must not exceed supply voltage or 15 V, whichever is less 3
Differential input voltage Vid -30 30 V 3
Power dissipation Ptot 680 mW 3
Storage temperature range Tstg -65 150 °C 3
Thermal resistance junction to ambient, SO-8 Rthja 125 °C/W SO-8; typical value per datasheet note 6 3
Thermal resistance junction to case, SO-8 Rthjc 40 °C/W SO-8; typical value per datasheet note 6 3
ESD human body model HBM 800 V 100 pF through 1.5 kΩ 3
ESD machine model MM 200 V 200 pF, no series resistor 3
ESD charged device model CDM 1.5 kV 3

CAD (KiCad official)

  • Symbol: TL061IDT
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: tl061idt-etched.step / tl061idt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl061idt.step / tl061idt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (16 pp, sha256 56c310b43fe690d6, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF