component
TL061CP
Public Made by Adomby adom
Texas Instruments FET Input Amplifiers, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+12−9@@ -53,23 +53,23 @@ "number": "1", "name": "OFFSET N1", "type": "passive",- "description": "Input offset null adjustment pin 1; connect to one end of a 100 k\u03a9 potentiometer (wiper to VCC- through 1.5 k\u03a9) to trim input offset voltage (see Figure 7-3)."+ "description": "Input offset null adjustment pin 1; connect to one end of a 100 kΩ potentiometer (wiper to VCC- through 1.5 kΩ) to trim input offset voltage (see Figure 7-3)." }, { "number": "2",- "name": "IN\u2013",+ "name": "IN–", "type": "input",- "description": "Inverting (negative) input; JFET input stage with 10\u00b9\u00b2 \u03a9 input resistance, input bias current 30 pA typ / 400 pA max at 25\u00b0C, common-mode input range VCC-+4 V to VCC+."+ "description": "Inverting (negative) input; JFET input stage with 10¹² Ω input resistance, input bias current 30 pA typ / 400 pA max at 25°C, common-mode input range VCC-+4 V to VCC+." }, { "number": "3", "name": "IN+", "type": "input",- "description": "Non-inverting (positive) input; JFET input stage with 10\u00b9\u00b2 \u03a9 input resistance, input bias current 30 pA typ / 400 pA max at 25\u00b0C, common-mode input range VCC-+4 V to VCC+."+ "description": "Non-inverting (positive) input; JFET input stage with 10¹² Ω input resistance, input bias current 30 pA typ / 400 pA max at 25°C, common-mode input range VCC-+4 V to VCC+." }, { "number": "4",- "name": "VCC\u2013",+ "name": "VCC–", "type": "power_in", "description": "Negative supply voltage pin; recommended operating range -5 V to -15 V, absolute maximum -18 V with respect to supply midpoint." },@@ -77,19 +77,19 @@ "number": "5", "name": "OFFSET N2", "type": "passive",- "description": "Input offset null adjustment pin 2; used together with OFFSET N1 and an external 100 k\u03a9 potentiometer to null input offset voltage (see Figure 7-3)."+ "description": "Input offset null adjustment pin 2; used together with OFFSET N1 and an external 100 kΩ potentiometer to null input offset voltage (see Figure 7-3)." }, { "number": "6", "name": "OUT", "type": "output",- "description": "Amplifier output; short-circuit protected (unlimited duration to either supply or ground), peak output swing \u00b113.5 V typ / \u00b110 V min into 10 k\u03a9 with \u00b115 V supply, slew rate 3.5 V/\u00b5s typ."+ "description": "Amplifier output; short-circuit protected (unlimited duration to either supply or ground), peak output swing ±13.5 V typ / ±10 V min into 10 kΩ with ±15 V supply, slew rate 3.5 V/µs typ." }, { "number": "7", "name": "VCC+", "type": "power_in",- "description": "Positive supply voltage pin; recommended operating range +5 V to +15 V, absolute maximum +18 V, quiescent supply current 200 \u00b5A typ / 250 \u00b5A max per amplifier at 25\u00b0C."+ "description": "Positive supply voltage pin; recommended operating range +5 V to +15 V, absolute maximum +18 V, quiescent supply current 200 µA typ / 250 µA max per amplifier at 25°C." }, { "number": "8",@@ -173,5 +173,8 @@ "docs/tl061cp-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }