Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TL061CP

Texas Instruments · FET Input Amplifiers · DIP-8

TL061CP from Texas Instruments, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OFFSET N1 passive Input offset null adjustment pin 1; connect to one end of a 100 kΩ potentiometer (wiper to VCC- through 1.5 kΩ) to trim input offset voltage (see Figure 7-3).
2 IN- input Inverting (negative) input; JFET input stage with 10¹² Ω input resistance, input bias current 30 pA typ / 400 pA max at 25°C, common-mode input range VCC-+4 V to VCC+.
3 IN+ input Non-inverting (positive) input; JFET input stage with 10¹² Ω input resistance, input bias current 30 pA typ / 400 pA max at 25°C, common-mode input range VCC-+4 V to VCC+.
4 VCC- power_in Negative supply voltage pin; recommended operating range -5 V to -15 V, absolute maximum -18 V with respect to supply midpoint.
5 OFFSET N2 passive Input offset null adjustment pin 2; used together with OFFSET N1 and an external 100 kΩ potentiometer to null input offset voltage (see Figure 7-3).
6 OUT output Amplifier output; short-circuit protected (unlimited duration to either supply or ground), peak output swing ±13.5 V typ / ±10 V min into 10 kΩ with ±15 V supply, slew rate 3.5 V/µs typ.
7 VCC+ power_in Positive supply voltage pin; recommended operating range +5 V to +15 V, absolute maximum +18 V, quiescent supply current 200 µA typ / 250 µA max per amplifier at 25°C.
8 NC unconnected No connect; do not connect this pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package DIP-8
Category Amplifiers/Comparators
Pins 8

CAD (KiCad official)

  • Symbol: TL061CP
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: tl061cp-etched.step / tl061cp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl061cp.step / tl061cp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (58 pp, sha256 b9cbf46658d83f69, retrieved 2026-09-25, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF