component
TL061CP
Public Made by Adomby adom
Texas Instruments FET Input Amplifiers, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
tl061cp: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+92−12
package.json+50−10@@ -68,23 +68,23 @@ "number": "1", "name": "OFFSET N1", "type": "passive",- "description": "Input offset null adjustment pin 1; connect to one end of a 100 k\u03a9 potentiometer (wiper to VCC- through 1.5 k\u03a9) to trim input offset voltage (see Figure 7-3)."+ "description": "Input offset null adjustment pin 1; connect to one end of a 100 kΩ potentiometer (wiper to VCC- through 1.5 kΩ) to trim input offset voltage (see Figure 7-3)." }, { "number": "2",- "name": "IN\u2013",+ "name": "IN–", "type": "input",- "description": "Inverting (negative) input; JFET input stage with 10\u00b9\u00b2 \u03a9 input resistance, input bias current 30 pA typ / 400 pA max at 25\u00b0C, common-mode input range VCC-+4 V to VCC+."+ "description": "Inverting (negative) input; JFET input stage with 10¹² Ω input resistance, input bias current 30 pA typ / 400 pA max at 25°C, common-mode input range VCC-+4 V to VCC+." }, { "number": "3", "name": "IN+", "type": "input",- "description": "Non-inverting (positive) input; JFET input stage with 10\u00b9\u00b2 \u03a9 input resistance, input bias current 30 pA typ / 400 pA max at 25\u00b0C, common-mode input range VCC-+4 V to VCC+."+ "description": "Non-inverting (positive) input; JFET input stage with 10¹² Ω input resistance, input bias current 30 pA typ / 400 pA max at 25°C, common-mode input range VCC-+4 V to VCC+." }, { "number": "4",- "name": "VCC\u2013",+ "name": "VCC–", "type": "power_in", "description": "Negative supply voltage pin; recommended operating range -5 V to -15 V, absolute maximum -18 V with respect to supply midpoint." },@@ -92,19 +92,19 @@ "number": "5", "name": "OFFSET N2", "type": "passive",- "description": "Input offset null adjustment pin 2; used together with OFFSET N1 and an external 100 k\u03a9 potentiometer to null input offset voltage (see Figure 7-3)."+ "description": "Input offset null adjustment pin 2; used together with OFFSET N1 and an external 100 kΩ potentiometer to null input offset voltage (see Figure 7-3)." }, { "number": "6", "name": "OUT", "type": "output",- "description": "Amplifier output; short-circuit protected (unlimited duration to either supply or ground), peak output swing \u00b113.5 V typ / \u00b110 V min into 10 k\u03a9 with \u00b115 V supply, slew rate 3.5 V/\u00b5s typ."+ "description": "Amplifier output; short-circuit protected (unlimited duration to either supply or ground), peak output swing ±13.5 V typ / ±10 V min into 10 kΩ with ±15 V supply, slew rate 3.5 V/µs typ." }, { "number": "7", "name": "VCC+", "type": "power_in",- "description": "Positive supply voltage pin; recommended operating range +5 V to +15 V, absolute maximum +18 V, quiescent supply current 200 \u00b5A typ / 250 \u00b5A max per amplifier at 25\u00b0C."+ "description": "Positive supply voltage pin; recommended operating range +5 V to +15 V, absolute maximum +18 V, quiescent supply current 200 µA typ / 250 µA max per amplifier at 25°C." }, { "number": "8",@@ -145,6 +145,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tl061cp.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tl061cp-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "bfeb7e171a91c591fc847308e0b0802624eb2a2042c17401fb51bc295a99bf93",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -130,7 +130,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tl061cp.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tl061cp-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "bfeb7e171a91c591fc847308e0b0802624eb2a2042c17401fb51bc295a99bf93",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -177,4 +217,4 @@ "visibility": { "public": true }-}+}