main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs thvd2410dgkr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers thvd2410dgkr: viewers · Ray
package.json thvd2410dgkr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json thvd2410dgkr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/thvd2410dgkr · Ray
thvd2410dgkr-etched.fit.json thvd2410dgkr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
thvd2410dgkr-etched.glb thvd2410dgkr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
thvd2410dgkr-etched.step thvd2410dgkr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
thvd2410dgkr.glb Publish 0.1.0 · Ray
thvd2410dgkr.kicad_mod Publish 0.1.0 · Ray
thvd2410dgkr.kicad_sym Publish 0.1.0 · Ray
thvd2410dgkr.lbr Publish 0.1.0 · Ray
thvd2410dgkr.step Publish 0.1.0 · Ray

THVD2410DGKR

Texas Instruments · RS-485 / RS-422 ICs · VSSOP-8-0.65mm

THVD2410DGKR from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 R output Receiver data output, VOH ≥ VCC - 0.4 V, VOL ≤ 0.4 V, output current ±8 mA.
2 RE input Receiver enable input, active low, 2-MΩ internal pull-up to VCC, VIH = 2 V, VIL = 0.8 V.
3 DE input Driver enable input, active high, 2-MΩ internal pull-down to GND, VIH = 2 V, VIL = 0.8 V.
4 D input Driver data input for differential driver control, VIH = 2 V, VIL = 0.8 V.
5 GND power_in Device ground, 0-V reference potential for power supply and signals.
6 A bidirectional Differential bus terminal A, complementary to B, protected to ±70-V DC fault and ±12-kV IEC 61000-4-2 contact discharge ESD.
7 B bidirectional Differential bus terminal B, complementary to A, protected to ±70-V DC fault and ±12-kV IEC 61000-4-2 contact discharge ESD.
8 VCC power_in Power supply input, 3.3-V to 5.5-V DC operating range, 5.6 mA typical quiescent current at full drive.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8-0.65mm
Category Interface
Pins 8

CAD (KiCad official)

  • Symbol: THVD2410DGKR
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
  • 3D model files: thvd2410dgkr-etched.step / thvd2410dgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); thvd2410dgkr.step / thvd2410dgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 2b30447ad828b138, retrieved 2026-09-24, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF