main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers thvd1552dr: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
thvd1552dr-etched.glb Publish 0.1.0 · Ray
thvd1552dr-etched.step thvd1552dr: factory component page (tier=mfr) · Ray
thvd1552dr-hero.glb thvd1552dr: hero GLB from the etched model (keeps the MPN mark) · Ray
thvd1552dr-hero.overlay.json Publish 0.1.0 · Ray
thvd1552dr.glb Publish 0.1.0 · Ray
thvd1552dr.kicad_mod Publish 0.1.0 · Ray
thvd1552dr.kicad_sym Publish 0.1.0 · Ray
thvd1552dr.lbr Publish 0.1.0 · Ray
thvd1552dr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 14 pins · Ray

THVD1552DR

Texas Instruments · RS-485 / RS-422 ICs · SOIC-14

THVD1552DR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Internally not connected.
2 R output Receive data output; the output goes high-impedance when RE is high or open (receiver disabled).
3 RE input Receiver enable, active low, with a 2 MΩ internal pull-up; the receiver is disabled when RE is high or open.
4 DE input Driver enable, active high, with a 2 MΩ internal pull-down; both bus outputs are high-impedance when DE is low or open.
5 D input Driver data input; when DE is high, a logic high drives Y high and Z low.
6 GND power_in Device ground; internally connected to pin 7.
7 GND power_in Device ground; internally connected to pin 6.
8 NC unconnected Internally not connected.
9 Y output Bus output, Y (complementary to Z).
10 Z output Bus output, Z (complementary to Y).
11 B input Bus input, B (complementary to A); bus terminals are rated for -15 V to 15 V at the recommended operating conditions.
12 A input Bus input, A (complementary to B); bus terminals are rated for -15 V to 15 V at the recommended operating conditions.
13 VCC power_in 5-V supply (4.5 V to 5.5 V); not connected to pin 14 internally, so power must be applied to both VCC pins.
14 VCC power_in 5-V supply (4.5 V to 5.5 V); not connected to pin 13 internally, so power must be applied to both VCC pins.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-14
Category Interface
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 4.5 5.5 V 7
High-level input voltage (driver, driver enable, receiver enable inputs) VIH 2 V 7
Low-level input voltage (driver, driver enable, receiver enable inputs) VIL 0 0.8 V 7
Input voltage at any bus terminal VI -15 15 V 7
Differential input voltage VID -15 15 V 7
Output current, driver IO -60 60 mA 7
Output current, receiver IOR -8 8 mA 7
Differential load resistance RL 54 Ω 7
Signaling rate (THVD1550, THVD1551, THVD1552) 1/tUI 50 Mbps THVD1550, THVD1551, THVD1552 7
Operating ambient temperature TA -40 125 °C 7
Junction temperature TJ -40 150 °C 7
Supply voltage VCC -0.5 7 V 6
Bus voltage, range at any bus pin (A, B, Y, or Z) with respect to GND -18 18 V 6
Input voltage, range at any logic pin (D, DE, or RE) -0.3 5.7 V 6
Receiver output current IO -24 24 mA 6
Storage temperature Tstg -65 150 °C 6
Driver differential output voltage magnitude /VOD/ 1.5 2.7 V RL = 60 Ω, -15 V ≤ Vtest ≤ 15 V (See Figure 11) 8
Driver differential output voltage magnitude /VOD/ 2 3 V RL = 100 Ω (See Figure 12) 8
Change in differential output voltage magnitude Δ/VOD/ -200 200 mV RL = 54 Ω (See Figure 12) 8
Common-mode output voltage VOC 1 3 V 8
Change in steady-state common-mode output voltage ΔVOC(SS) -200 200 mV 8
Short-circuit output current IOS -250 250 mA DE = VCC, -15 V ≤ VO ≤ 15 V 8
Bus input current (THVD155x) II 115 160 µA DE = 0 V, VCC = 0 V or 5.5 V, VI = 12 V 8
Bus input current (THVD155x) II 150 200 µA DE = 0 V, VCC = 0 V or 5.5 V, VI = 15 V 8
Bus input current (THVD155x) II -130 -75 µA DE = 0 V, VCC = 0 V or 5.5 V, VI = -7 V 8
Bus input current (THVD155x) II -280 -180 µA DE = 0 V, VCC = 0 V or 5.5 V, VI = -15 V 8
Positive-going input threshold voltage VTH+ -85 -20 mV Over common-mode range of -7 V to +12 V 8
Negative-going input threshold voltage VTH- -200 -135 mV Over common-mode range of -7 V to +12 V 8
Input hysteresis VHYS 50 mV Over common-mode range of -7 V to +12 V 8
Negative-going input threshold voltage VTH- -220 -135 mV Over common-mode range of ±15 V 8
Output high voltage VOH 4 V IOH = -8 mA 8
Output low voltage VOL 0.2 0.4 V IOL = 8 mA 8
Output high-impedance current IOZ -1 1 µA VO = 0 V or VCC, RE = VCC 8
Input current (D, DE, RE) IIN -5 0 5 µA 4.5 V ≤ VCC ≤ 5.5 V, 0 V ≤ VIN ≤ VCC 8
Supply current (quiescent), driver and receiver enabled ICC 700 1000 µA RE = 0 V, DE = VCC, No load 8
Supply current (quiescent), driver enabled, receiver disabled ICC 400 620 µA RE = VCC, DE = VCC, No load 8
Supply current (quiescent), driver disabled, receiver enabled ICC 400 630 µA RE = 0 V, DE = 0 V, No load 8
Supply current (quiescent), driver and receiver disabled ICC 0.1 1 µA RE = VCC, DE = 0 V, D = open, No load 8
Driver differential output rise/fall time tr, tf 1 2 6 ns RL = 54 Ω, CL = 50 pF (See Figure 13) 9
Driver propagation delay tPHL, tPLH 5 10 16 ns 9
Driver pulse skew tSK(P) 3.5 ns /tPHL, tPLH/ 9
Driver disable time (THVD1550, THVD1552) tPHZ, tPLZ 10 22 ns See Figure 14 and Figure 15 9
Driver enable time (THVD1550, THVD1552) tPZH, tPZL 10 22 ns RE = 0 V 9
Driver enable time (THVD1550, THVD1552) tPZH, tPZL 2 4 µs RE = VCC 9
Receiver output rise/fall time tr, tf 1 3 6 ns CL = 15 pF (See Figure 16) 9
Receiver propagation delay tPHL, tPLH 30 45 ns CL = 15 pF (See Figure 16) 9
Receiver pulse skew tSK(P) 2 ns /tPHL, tPLH/ 9
Receiver disable time (THVD1550, THVD1552) tPHZ, tPLZ 8 18 ns 9
Receiver enable time, driver enabled (THVD1550, THVD1552) tPZH(1), tPZL(1), tPZH(2), tPZL(2) 55 90 ns DE = VCC (See Figure 17) 9
Receiver enable time, driver disabled (THVD1550, THVD1552) tPZH(1), tPZL(1), tPZH(2), tPZL(2) 3 8 µs DE = 0 V (See Figure 18) 9
Junction-to-ambient thermal resistance (D, 14 pins) RθJA 88 °C/W 7
Junction-to-case (top) thermal resistance (D, 14 pins) RθJC(top) 45.4 °C/W 7
Junction-to-board thermal resistance (D, 14 pins) RθJB 44.1 °C/W 7
Junction-to-top characterization parameter (D, 14 pins) ψJT 11.3 °C/W 7
Junction-to-board characterization parameter (D, 14 pins) ψJB 43.7 °C/W 7

CAD (KiCad official)

  • Symbol: THVD1552DR
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: thvd1552dr-etched.step / thvd1552dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); thvd1552dr.step / thvd1552dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 6548e9b62323185e, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF