component
THS770012IRGET
Public Made by Adomby adom
Texas Instruments Differential Amplifiers, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTHS770012IRGET
Texas Instruments · Differential Amplifiers · VQFN-24-EP(4x4)
THS770012IRGET from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | PD | input | Power down: High = low power (sleep) mode, Low = active; the device powers on below 0.5V and powers down above 2.0V. |
| 3 | VIN- | power_in | Inverting input pin. |
| 4 | VIN+ | power_in | Non-inverting input pin. |
| 5 | VOCM | input | Output common-mode voltage control input pin; VOCM voltage range is 2.25V to 2.75V with a gain of 1 V/V, supplied by an external source. |
| 6 | NC | unconnected | No internal connection. |
| 7 | NC | unconnected | No internal connection. |
| 8 | GND | power_in | Ground; must be connected to thermal pad. |
| 9 | GND | power_in | Ground; must be connected to thermal pad. |
| 10 | GND | power_in | Ground; must be connected to thermal pad. |
| 11 | GND | power_in | Ground; must be connected to thermal pad. |
| 12 | NC | unconnected | No internal connection. |
| 13 | GS- | passive | Gain-setting connection for the inverting output. |
| 14 | Unused | passive | Bonded to die but not used; tie to GND. |
| 15 | VOUT- | output | Inverting output pin. |
| 16 | VOUT+ | output | Non-inverting output pin. |
| 17 | Unused | passive | Bonded to die but not used; tie to GND. |
| 18 | GS+ | passive | Gain-setting connection for the non-inverting output. |
| 19 | NC | unconnected | No internal connection. |
| 20 | VS+ | power_in | Power supply pin, +5V nominal (specified operating voltage 4.75V to 5.25V). |
| 21 | VS+ | power_in | Power supply pin, +5V nominal (specified operating voltage 4.75V to 5.25V). |
| 22 | VS+ | power_in | Power supply pin, +5V nominal (specified operating voltage 4.75V to 5.25V). |
| 23 | VS+ | power_in | Power supply pin, +5V nominal (specified operating voltage 4.75V to 5.25V). |
| 24 | NC | unconnected | No internal connection. |
| 25 | Thermal pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-24-EP(4x4) |
| Category | Amplifiers/Comparators |
| Pins | 25 |
CAD (KiCad official)
- Symbol:
THS770012IRGET - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm - 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
ths770012irget-etched.step/ths770012irget-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ths770012irget.step/ths770012irget.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
b69fb97b5ebbc005, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).