component
THS770006IRGER
Public Made by Adomby adom
Texas Instruments Differential Amplifiers, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+61@@ -0,0 +1,61 @@+# THS770006IRGER++**Texas Instruments** · Differential Amplifiers · VQFN-24-EP(4x4)++THS770006IRGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | No internal connection. |+| 2 | PD | input | Power-down input: high puts the device in low-power (sleep) mode and low keeps it active; the device powers on below 0.5 V and powers down above 2.0 V. |+| 3 | VIN- | power_in | Inverting input pin of the fully-differential amplifier. |+| 4 | VIN+ | power_in | Noninverting input pin of the fully-differential amplifier. |+| 5 | VOCM | input | Output common-mode voltage control input pin. |+| 6 | NC | unconnected | No internal connection. |+| 7 | NC | unconnected | No internal connection. |+| 8 | GND | power_in | Ground; must be connected to the thermal pad. |+| 9 | GND | power_in | Ground; must be connected to the thermal pad. |+| 10 | GND | power_in | Ground; must be connected to the thermal pad. |+| 11 | GND | power_in | Ground; must be connected to the thermal pad. |+| 12 | NC | unconnected | No internal connection. |+| 13 | NC | unconnected | No internal connection. |+| 14 | Unused | passive | Bonded to die but not used; tie to GND. |+| 15 | VOUT- | output | Inverting output pin. |+| 16 | VOUT+ | output | Noninverting output pin. |+| 17 | Unused | passive | Bonded to die but not used; tie to GND. |+| 18 | NC | unconnected | No internal connection. |+| 19 | NC | unconnected | No internal connection. |+| 20 | VS+ | power_in | Power supply pin, +5 V nominal; absolute maximum VS+ to GND is 5.5 V. |+| 21 | VS+ | power_in | Power supply pin, +5 V nominal; absolute maximum VS+ to GND is 5.5 V. |+| 22 | VS+ | power_in | Power supply pin, +5 V nominal; absolute maximum VS+ to GND is 5.5 V. |+| 23 | VS+ | power_in | Power supply pin, +5 V nominal; absolute maximum VS+ to GND is 5.5 V. |+| 24 | NC | unconnected | No internal connection. |+| 25 | Thermal pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24-EP(4x4) |+| Category | Amplifiers/Comparators |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `THS770006IRGER`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `ths770006irger-etched.step` / `ths770006irger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ths770006irger.step` / `ths770006irger.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ths770006) (41 pp, sha256 `3239d76c901a9112`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ths770006irger-datasheet.pdf)
page.jsonadded+303@@ -0,0 +1,303 @@+{+ "slug": "ths770006irger",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Differential Amplifiers, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "ths770006irger",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ths770006irger.kicad_sym",+ "ths770006irger.kicad_mod",+ "ths770006irger.glb",+ "ths770006irger.step",+ "ths770006irger.lbr",+ "docs/hero.png",+ "docs/ths770006irger-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ths770006irger-hero.glb",+ "ths770006irger-hero.overlay.json"+ ],+ "component": {+ "mpn": "THS770006IRGER",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-24-EP(4x4)",+ "pin_count": 25,+ "category": "Amplifiers/Comparators",+ "subcategory": "Differential Amplifiers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ths770006",+ "parts": {+ "symbol": "ths770006irger.kicad_sym",+ "footprint": "ths770006irger.kicad_mod",+ "model_3d": "ths770006irger-hero.glb",+ "model_3d_plain": "ths770006irger.glb",+ "model_3d_step": "ths770006irger-etched.step",+ "model_3d_step_plain": "ths770006irger.step",+ "lbr": "ths770006irger.lbr"+ },+ "distributor_links": {+ "lcsc": "C2653027",+ "digikey": "296-27747-2-ND",+ "mouser": "595-THS770006IRGER"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T18:40:37Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-27747-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-THS770006IRGER",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "2",+ "name": "PD",+ "type": "input",+ "description": "Power-down input: high puts the device in low-power (sleep) mode and low keeps it active; the device powers on below 0.5 V and powers down above 2.0 V."+ },+ {+ "number": "3",+ "name": "VIN–",+ "type": "power_in",+ "description": "Inverting input pin of the fully-differential amplifier."+ },+ {+ "number": "4",+ "name": "VIN+",+ "type": "power_in",+ "description": "Noninverting input pin of the fully-differential amplifier."+ },+ {+ "number": "5",+ "name": "VOCM",+ "type": "input",+ "description": "Output common-mode voltage control input pin."+ },+ {+ "number": "6",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground; must be connected to the thermal pad."+ },+ {+ "number": "9",+ "name": "GND",+ "type": "power_in",+ "description": "Ground; must be connected to the thermal pad."+ },+ {+ "number": "10",+ "name": "GND",+ "type": "power_in",+ "description": "Ground; must be connected to the thermal pad."+ },+ {+ "number": "11",+ "name": "GND",+ "type": "power_in",+ "description": "Ground; must be connected to the thermal pad."+ },+ {+ "number": "12",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "13",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "14",+ "name": "Unused",+ "type": "passive",+ "description": "Bonded to die but not used; tie to GND."+ },+ {+ "number": "15",+ "name": "VOUT–",+ "type": "output",+ "description": "Inverting output pin."+ },+ {+ "number": "16",+ "name": "VOUT+",+ "type": "output",+ "description": "Noninverting output pin."+ },+ {+ "number": "17",+ "name": "Unused",+ "type": "passive",+ "description": "Bonded to die but not used; tie to GND."+ },+ {+ "number": "18",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "19",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "20",+ "name": "VS+",+ "type": "power_in",+ "description": "Power supply pin, +5 V nominal; absolute maximum VS+ to GND is 5.5 V."+ },+ {+ "number": "21",+ "name": "VS+",+ "type": "power_in",+ "description": "Power supply pin, +5 V nominal; absolute maximum VS+ to GND is 5.5 V."+ },+ {+ "number": "22",+ "name": "VS+",+ "type": "power_in",+ "description": "Power supply pin, +5 V nominal; absolute maximum VS+ to GND is 5.5 V."+ },+ {+ "number": "23",+ "name": "VS+",+ "type": "power_in",+ "description": "Power supply pin, +5 V nominal; absolute maximum VS+ to GND is 5.5 V."+ },+ {+ "number": "24",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "25",+ "name": "Thermal pad",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The exposed thermal pad on the bottom of the package is not given a pin number in the datasheet, so ; The pin-configuration drawing on page 6 is garbled in the text extraction, so pin numbers were taken; The datasheet gives no package body dimensions in the extracted text, so the 4x4 mm size in the pack",+ "exposed pad 25 added from the footprint"+ ],+ "pages_sent": 9,+ "cost_usd": 0.0664,+ "at": "2026-10-08T18:40:22"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ths770006",+ "pages": 41,+ "sha256": "3239d76c901a9112",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 25,+ "described": 25,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ths770006irger.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4,+ 4,+ 0.77+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ths770006irger-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4,+ 4,+ 0.77+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "7e6b3f7ee890404ea7c44454faee7c03f8aedd1464825f8fcbf38b0e716b9821",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}