component
THS770006IRGER
Public Made by Adomby adom
Texas Instruments Differential Amplifiers, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTHS770006IRGER
Texas Instruments · Differential Amplifiers · VQFN-24-EP(4x4)
THS770006IRGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | PD | input | Power-down input: high puts the device in low-power (sleep) mode and low keeps it active; the device powers on below 0.5 V and powers down above 2.0 V. |
| 3 | VIN- | power_in | Inverting input pin of the fully-differential amplifier. |
| 4 | VIN+ | power_in | Noninverting input pin of the fully-differential amplifier. |
| 5 | VOCM | input | Output common-mode voltage control input pin. |
| 6 | NC | unconnected | No internal connection. |
| 7 | NC | unconnected | No internal connection. |
| 8 | GND | power_in | Ground; must be connected to the thermal pad. |
| 9 | GND | power_in | Ground; must be connected to the thermal pad. |
| 10 | GND | power_in | Ground; must be connected to the thermal pad. |
| 11 | GND | power_in | Ground; must be connected to the thermal pad. |
| 12 | NC | unconnected | No internal connection. |
| 13 | NC | unconnected | No internal connection. |
| 14 | Unused | passive | Bonded to die but not used; tie to GND. |
| 15 | VOUT- | output | Inverting output pin. |
| 16 | VOUT+ | output | Noninverting output pin. |
| 17 | Unused | passive | Bonded to die but not used; tie to GND. |
| 18 | NC | unconnected | No internal connection. |
| 19 | NC | unconnected | No internal connection. |
| 20 | VS+ | power_in | Power supply pin, +5 V nominal; absolute maximum VS+ to GND is 5.5 V. |
| 21 | VS+ | power_in | Power supply pin, +5 V nominal; absolute maximum VS+ to GND is 5.5 V. |
| 22 | VS+ | power_in | Power supply pin, +5 V nominal; absolute maximum VS+ to GND is 5.5 V. |
| 23 | VS+ | power_in | Power supply pin, +5 V nominal; absolute maximum VS+ to GND is 5.5 V. |
| 24 | NC | unconnected | No internal connection. |
| 25 | Thermal pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-24-EP(4x4) |
| Category | Amplifiers/Comparators |
| Pins | 25 |
CAD (KiCad official)
- Symbol:
THS770006IRGER - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm - 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
ths770006irger-etched.step/ths770006irger-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ths770006irger.step/ths770006irger.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
3239d76c901a9112, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).