main
History Download
Ray ths4561idgkr: specified limits as data (metadata.characteristics, 48 rows from the datasheet) 5513507

THS4561IDGKR

Texas Instruments · Differential Amplifiers · MSOP-8

THS4561IDGKR from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN- input Inverting (negative) amplifier input; accepts voltages from (VS-) - 0.5 V to (VS+) + 0.5 V with maximum differential input voltage of ±1 V.
2 VOCM input Common-mode voltage input for setting output average voltage; valid range from VS- + 0.45 V to VS+ - 1.2 V with input impedance of 200 kΩ
3 VS+ power_in Positive power-supply input; operates from 2.85 V to 12.6 V with quiescent current of 775 µA typical at 5 V.
4 OUT+ output Noninverting (positive) amplifier output; provides rail-to-rail voltage swing with continuous output current of ±31 mA maximum.
5 OUT- output Inverting (negative) amplifier output; provides rail-to-rail voltage swing with continuous output current of ±31 mA maximum.
6 VS- power_in Negative power-supply input serving as ground reference for single-supply operation or negative supply terminal in split-supply configurations.
7 PD input Power-down control; logic high (≥ VS+ - 0.5 V) enables normal operation, logic low (≤ VS+ - 1.8 V) disables the amplifier.
8 IN+ input Noninverting (positive) amplifier input; accepts voltages from (VS-) - 0.5 V to (VS+) + 0.5 V with maximum differential input voltage of ±1 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Total supply voltage, VS = (VS+ – VS–) VS 13.5 V 5
Supply turn-on/off dV/dT dV/dT -0.35 0.35 V/µs 5
Differential input voltage -1 1 V 5
Continuous input current -10 10 mA 5
Continuous output current -20 20 mA 5
Junction temperature TJ 150 °C 5
Operating free-air temperature TA -40 125 °C 5
Storage temperature Tstg -65 150 °C 5
Total supply voltage VS 2.85 12.6 V 5
Operating free-air temperature TA -40 25 125 °C 5
Junction-to-ambient thermal resistance (DGK) RθJA 183.1 °C/W DGK (VSSOP) 8 pins 5
Junction-to-case (top) thermal resistance (DGK) RθJC(top) 70.3 °C/W DGK (VSSOP) 8 pins 5
Junction-to-board thermal resistance (DGK) RθJB 104.9 °C/W DGK (VSSOP) 8 pins 5
Junction-to-top characterization parameter (DGK) ΨJT 10.8 °C/W DGK (VSSOP) 8 pins 5
Junction-to-board characterization parameter (DGK) ΨJB 103.2 °C/W DGK (VSSOP) 8 pins 5
Input offset voltage VOS -250 50 250 µV TA = 25°C 7
Input offset voltage drift -4 0.5 4 µV/°C TA = 0°C to 85°C, TA = –40°C to 125°C 7
Input bias current IB+, IB– 370 600 nA TA = 25°C 7
Input bias current drift 4.1 8 nA/°C TA = –40°C to 125°C 7
Input offset current IOS -20 2 20 nA TA = 25°C 7
Input offset current drift -200 40 200 pA/°C TA = –40°C to 125°C 7
Open-loop voltage gain AOL 104 115 dB Vo = ±2 V 7
Common-mode rejection ratio CMRR 95 110 dB Midsupply inputs 7
Common-mode rejection ratio CMRR 108 dB Midsupply inputs, TA = –40°C to 125°C 7
Continuous output current -27 31 mA VO = ±3.6 V, VOCM offset < 15 mV 9
Continuous output current -17 mA TA = –40°C to +125°C, VO = ±2.25 V, VOCM offset < 15 mV 9
Linear output current -20 22 mA VS = 5 V, VO = ±2.7 V, AOL > 80 dB 9
Linear output current -22 27 mA VS = 12 V, VO = ±4.6 V, AOL > 80 dB 9
Linear output current -15 mA VS = 12 V, TA = –40°C to +125°C, VO = ±3.1 V, AOL > 80 dB 9
Gain (VOCM to output) 0.997 1 1.003 V/V VOCM = 0 V 9
VOCM input bias current -0.5 -0.1 0.5 µA 9
+PSR to VOCM 72 78 dB VOCM = midsupply 9
–PSR to VOCM 70 76 dB VOCM = midsupply 9
Default VOCM offset -40 8 40 mV Relative to midsupply, VOCM pin floating 9
Default VOCM offset voltage drift 120 200 600 µV/℃ TA = –40℃ to 125℃ 9
VOCM offset voltage -3.5 0.25 3.5 mV VOCM driven to midsupply 9
VOCM offset voltage drift -15 3 15 µV/°C TA = –40°C to 125°C 9
Specified operating voltage 2.85 12.6 V 10
Quiescent current IQ 710 760 810 µA VS = 2.85 V, no load, TA = 25°C 10
Quiescent current IQ 725 775 825 µA VS = 5 V, no load, TA = 25°C 10
Quiescent current IQ 700 900 µA VS = 5 V, no load, TA = –40°C to 125°C 10
Quiescent current IQ 770 825 880 µA VS = 12 V, no load, TA = 25°C 10
Quiescent current IQ 740 1000 µA VS = 12 V, no load, TA = –40°C to 125°C 10
Quiescent current drift 0.7 1.3 µA/°C No load, TA = –40°C to 125°C 10
Power-supply rejection ratio PSRR 92 110 dB Either supply to input VOS 10
PD pin bias current (amplifier enabled) PD 1.2 3.5 µA PD = VS+ – 0.5 V (amplifier enabled) 10
PD pin bias current (amplifier disabled) PD -3 -1.9 µA PD = VS– (amplifier disabled) 10
Power-down quiescent current 3 15 40 µA No load 10

CAD (KiCad official)

  • Symbol: THS4561IDGKR
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: ths4561idgkr-etched.step / ths4561idgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ths4561idgkr.step / ths4561idgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (56 pp, sha256 63411f3917bbfd62, retrieved 2026-09-21, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF