main
Ray Publish 0.1.0 b850185

THS4541QWRGTRQ1

Texas Instruments · Differential Amplifiers · VQFN-16-EP(3x3)

THS4541QWRGTRQ1 from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB- output Inverted (negative) output feedback pin; the external feedback resistor from FB- connects to the IN+ pin.
2 IN+ input Noninverting (positive) amplifier input; the input resistors drive this pin, and the input pins operate down to the negative rail with about 1.2 V headroom required to Vs+.
3 IN- input Inverting (negative) amplifier input; the input resistors drive this pin, and the input pins operate down to the negative rail with about 1.2 V headroom required to Vs+.
4 FB+ output Noninverting (positive) output feedback pin; the external feedback resistor from FB+ connects to the IN- pin.
5 Vs+ power_in Positive power-supply input; single-supply range is 2.7 V to 5.4 V.
6 Vs+ power_in Positive power-supply input; single-supply range is 2.7 V to 5.4 V.
7 Vs+ power_in Positive power-supply input; single-supply range is 2.7 V to 5.4 V.
8 Vs+ power_in Positive power-supply input; single-supply range is 2.7 V to 5.4 V.
9 Vocm input Common-mode voltage input that sets the output average voltage; if left open it defaults to midsupply, and the usable range is about 0.91 V above Vs- to 1.1 V below Vs+.
10 OUT+ output Noninverted (positive) amplifier output, a rail-to-rail output with about 0.2 V headroom to either supply.
11 OUT- output Inverted (negative) amplifier output, a rail-to-rail output with about 0.2 V headroom to either supply.
12 PD input Power-down control: logic high (above (Vs-) + 1.7 V) gives normal operation and a level within 0.7 V of Vs- powers the device off; the pin cannot be floated because it has no internal pull resistor.
13 Vs- power_in Negative power-supply input, ground for single-supply operation; total supply (Vs+) - (Vs-) is 2.7 V to 5.4 V.
14 Vs- power_in Negative power-supply input, ground for single-supply operation; total supply (Vs+) - (Vs-) is 2.7 V to 5.4 V.
15 Vs- power_in Negative power-supply input, ground for single-supply operation; total supply (Vs+) - (Vs-) is 2.7 V to 5.4 V.
16 Vs- power_in Negative power-supply input, ground for single-supply operation; total supply (Vs+) - (Vs-) is 2.7 V to 5.4 V.
17 Exposed thermal pad passive Exposed thermal pad, electrically isolated from the die, that must be soldered to a power or ground plane and not left floating.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-16-EP(3x3)
Category Amplifiers/Comparators
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, (Vs+), Vs- 5.5 V 4
Differential input voltage -1 1 V 4
Continuous input current -20 20 mA 4
Continuous output current -80 80 mA 4
Maximum junction temperature 150 °C 4
Operating free-air temperature -40 125 °C 4
Storage temperature Tstg -65 150 °C 4
Single-supply voltage Vs+ 2.7 5 5.4 V 4
Ambient temperature TA -40 25 125 °C 4
Open-loop voltage gain AOL 100 119 dB 6
Input-referred offset voltage -450 450 µV TA = 25°C 6
Input-referred offset voltage -600 600 µV TA = 0°C to 70°C 6
Input-referred offset voltage -700 700 µV TA = -40°C to +85°C 6
Input-referred offset voltage -850 850 µV TA = -40°C to +125°C 6
Input offset voltage drift -2.4 2.4 µV/°C TA = -40°C to +125°C 6
Input bias current (positive out of node) 10 13 µA TA = 25°C 6
Input bias current (positive out of node) 11 13.5 µA TA = 0°C to 70°C 6
Input bias current (positive out of node) 12 14 µA TA = -40°C to +85°C 6
Input bias current (positive out of node) 12 14.5 µA TA = -40°C to +125°C 6
Input bias current drift 6 15 nA/°C TA = -40°C to +125°C 6
Input offset current -500 500 nA TA = 25°C 6
Input offset current -550 550 nA TA = 0°C to 70°C 6
Input offset current -580 580 nA TA = -40°C to +85°C 6
Input offset current -620 620 nA TA = -40°C to +125°C 6
Input offset current drift -1.3 1.3 nA/°C TA = -40°C to +125°C 6
Common-mode rejection ratio 85 100 dB Input pins at ((Vs+), Vs-) / 2 6
Output current drive -75 75 mA TA = 25°C 6
Quiescent operating current 9.7 10.1 10.5 mA TA = 25°C, Vs+ = 5 V 7
Quiescent operating current 9.4 10.1 11 mA TA = -40°C to +125°C 7
Power-supply rejection ratio ±PSRR 85 100 dB Either supply pin to differential Vout 7
Disable pin bias current 20 50 nA PD = Vs- → Vs+ 7
Power-down quiescent current 6 30 µA PD = (Vs-) + 0.7 V 7
Power-down quiescent current 2 8 µA PD = Vs- 7
Gain (Vocm input to differential output average) 0.975 0.982 0.995 V/V 7
Input bias current (Vocm pin) -0.7 0.1 0.7 µA Considered positive out of node 7
Default voltage offset from ((Vs+), Vs-) / 2 -40 40 mV Vocm pin open 7
Common-mode offset voltage CM Vos -5 5 mV Vocm input driven to ((Vs+), Vs-) / 2; TA = 25°C 7
Common-mode offset voltage CM Vos -6 5.8 mV Vocm input driven to ((Vs+), Vs-) / 2; TA = 0°C to 70°C 7
Common-mode offset voltage CM Vos -6.2 6.2 mV Vocm input driven to ((Vs+), Vs-) / 2; TA = -40°C to +85°C 7
Common-mode offset voltage CM Vos -7 7.08 mV Vocm input driven to ((Vs+), Vs-) / 2; TA = -40°C to +125°C 7
Common-mode offset voltage drift -20 20 µV/°C Vocm input driven to ((Vs+), Vs-) / 2 7
Common-mode loop supply headroom to negative supply 0.88 V < ±12-mV shift from midsupply CM Vos; TA = 25°C 7
Common-mode loop supply headroom to negative supply 0.91 V < ±12-mV shift from midsupply CM Vos; TA = 0°C to 70°C 7
Common-mode loop supply headroom to negative supply 0.94 V < ±12-mV shift from midsupply CM Vos; TA = -40°C to +85°C 7
Common-mode loop supply headroom to positive supply 1.1 V < ±12-mV shift from midsupply CM Vos; TA = 25°C 7
Common-mode loop supply headroom to positive supply 1.15 V < ±12-mV shift from midsupply CM Vos; TA = 0°C to 70°C 7
Common-mode loop supply headroom to positive supply 1.2 V < ±12-mV shift from midsupply CM Vos; TA = -40°C to +85°C 7
Junction-to-ambient thermal resistance RθJA 56.1 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 69 °C/W 4
Junction-to-board thermal resistance RθJB 30.4 °C/W 4
Junction-to-top characterization parameter ψJT 3.5 °C/W 4
Junction-to-board characterization parameter ψJB 30.4 °C/W 4
Junction-to-case (bottom) thermal resistance RθJC(bot) 14.2 °C/W 4

CAD (KiCad official)

  • Symbol: THS4541QWRGTRQ1
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: ths4541qwrgtrq1-etched.step / ths4541qwrgtrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ths4541qwrgtrq1.step / ths4541qwrgtrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (63 pp, sha256 901037c4a20c17a8, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF