# THS4150IDGNR

**Texas Instruments** · Differential Amplifiers · MSOP-8-EP

THS4150IDGNR from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN− | power_in | Inverting differential input; the input voltage must stay within ±VCC and the differential input voltage within ±6 V per the absolute maximum ratings. |
| 2 | VOCM | input | Output common-mode voltage input that sets the common-mode level of the differential outputs (VOC = VOCM). |
| 3 | VCC+ | power_in | Positive power supply; the device operates from 5 V single supply up to ±15 V dual supply, with a maximum supply span of ±16.5 V. |
| 4 | VOUT+ | output | Non-inverting differential output; the differential output voltage is defined as VOD = VO+ − VO−. |
| 5 | VOUT− | output | Inverting differential output; the differential output voltage is defined as VOD = VO+ − VO−. |
| 6 | VCC− | power_in | Negative power supply connection for the dual-supply operation (VCC− to VCC+ up to ±16.5 V total). |
| 7 | PD | input | Shutdown control on the THS4150 (THS4151 has NC on this pin); the datasheet gives shutdown current ICC(SD) = 1 mA at VCC = ±5 V but does not state the logic levels for this pin. |
| 8 | VIN+ | power_in | Non-inverting differential input; the input voltage must stay within ±VCC and the differential input voltage within ±6 V per the absolute maximum ratings. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8-EP |
| Category | Amplifiers/Comparators |
| Pins | 9 |

## CAD (KiCad official)

- Symbol: `THS4150IDGNR`
- Footprint: `Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm`
- 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files: `ths4150idgnr-etched.step` / `ths4150idgnr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ths4150idgnr.step` / `ths4150idgnr.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ths4151) (38 pp, sha256 `55561fa3cb80d83d`, retrieved 2026-10-08, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/ths4150idgnr-datasheet.pdf)