# THS4052CDGNR

**Texas Instruments** · Operational Amplifier · HVSSOP-8-EP

THS4052CDGNR from Texas Instruments, in a HVSSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier channel 1, which the datasheet rates at 100 mA typical output drive with 150 mA absolute maximum output current. |
| 2 | 1IN− | input | Inverting input of amplifier channel 1, with input voltage limited to ±VCC and differential input voltage limited to ±4 V absolute maximum. |
| 3 | 1IN+ | input | Non-inverting input of amplifier channel 1, with input voltage limited to ±VCC and differential input voltage limited to ±4 V absolute maximum. |
| 4 | −VCC | power_in | Negative power supply pin; the recommended supply is ±4.5 V to ±16 V dual or 9 V to 32 V single, with an absolute maximum supply of ±16.5 V. |
| 5 | 2IN+ | input | Non-inverting input of amplifier channel 2, with input voltage limited to ±VCC and differential input voltage limited to ±4 V absolute maximum. |
| 6 | 2IN− | input | Inverting input of amplifier channel 2, with input voltage limited to ±VCC and differential input voltage limited to ±4 V absolute maximum. |
| 7 | 2OUT | output | Output of amplifier channel 2, which the datasheet rates at 100 mA typical output drive with 150 mA absolute maximum output current. |
| 8 | VCC+ | power_in | Positive power supply pin; the recommended supply is ±4.5 V to ±16 V dual or 9 V to 32 V single, with an absolute maximum supply of ±16.5 V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-8-EP |
| Category | Amplifiers/Comparators |
| Pins | 9 |

## CAD (KiCad official)

- Symbol: `THS4052CDGNR`
- Footprint: `Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm`
- 3D model: HVSSOP-8-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal HVSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files: `ths4052cdgnr-etched.step` / `ths4052cdgnr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ths4052cdgnr.step` / `ths4052cdgnr.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ths4051) (42 pp, sha256 `d9e7ab03eda6b12b`, retrieved 2026-10-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/ths4052cdgnr-datasheet.pdf)