Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

THS4022IDGN

Texas Instruments · Operational Amplifier · HVSSOP-8-EP

THS4022IDGN from Texas Instruments, in a HVSSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Channel 1 output of the THS4022 dual amplifier.
2 1IN- input Channel 1 inverting input.
3 1IN+ input Channel 1 noninverting input.
4 VCC- power_in Negative power supply; the device operates from ±4.5 V to ±16 V dual supply or 9 V to 32 V single supply, with decoupling to GND recommended close to the pin.
5 2IN+ input Channel 2 noninverting input.
6 2IN- input Channel 2 inverting input.
7 2OUT output Channel 2 output of the THS4022 dual amplifier.
8 VCC+ power_in Positive power supply; the device operates from ±4.5 V to ±16 V dual supply or 9 V to 32 V single supply, with decoupling to GND recommended close to the pin.
9 PowerPAD passive Exposed thermal pad is electrically isolated from all other pins and can be connected to any potential from VCC- to VCC+, typically the ground plane.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HVSSOP-8-EP
Category Amplifiers/Comparators
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, dual supply (recommended operating) VCC 4.5 15 16 V Dual supply 4
Supply voltage, single supply (recommended operating) VCC 9 30 32 V Single supply 4
Operating free-air temperature (recommended operating) TA -40 25 85 °C I-suffix 4
Supply voltage VCC- to VCC+ (absolute maximum) VCC 33 V 4
Output current (absolute maximum) IO 240 mA Footnote 2: do not exceed maximum junction temperature 4
Differential input voltage (absolute maximum) VIO 1.5 V 4
Continuous input current (absolute maximum) IIN 10 mA 4
Maximum junction temperature (absolute maximum) TJ 150 °C 4
Operating free-air temperature (absolute maximum) TA -40 85 °C I-suffix 4
Storage temperature (absolute maximum) Tstg -65 150 °C 4
Lead temperature (absolute maximum) 300 °C 1.6 mm (1/16 inch) from case for 10 seconds 4
Junction-to-ambient thermal resistance RθJA 52 °C/W DGN (HVSSOP) 8 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 75.2 °C/W DGN (HVSSOP) 8 pins 5
Junction-to-board thermal resistance RθJB 24.5 °C/W DGN (HVSSOP) 8 pins 5
Junction-to-top characterization parameter ΨJT 4 °C/W DGN (HVSSOP) 8 pins 5
Junction-to-board characterization parameter ΨJB 24.5 °C/W DGN (HVSSOP) 8 pins 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 9.1 °C/W DGN (HVSSOP) 8 pins 5
Open-loop gain AOL 92 100 dB VCC = ±15 V, VO = ±10 V, RL = 1 kΩ, TA = 25°C 6
Open-loop gain AOL 91 dB VCC = ±15 V, VO = ±10 V, RL = 1 kΩ, TA = full range 6
Open-loop gain AOL 86 98 dB VCC = ±5 V, VO = ±2.5 V, RL = 1 kΩ, TA = 25°C 6
Open-loop gain AOL 84 dB VCC = ±5 V, VO = ±2.5 V, RL = 1 kΩ, TA = full range 6
Input offset voltage VOS 0.3 2 mV VCC = ±5 V or ±15 V, TA = 25°C 6
Input offset voltage VOS 3 mV VCC = ±5 V or ±15 V, TA = full range 6
Input bias current IIB 9 20 µA VCC = ±5 V or ±15 V, TA = 25°C 6
Input bias current IIB 33 µA VCC = ±5 V or ±15 V, TA = full range 6
Input offset current IOS 30 250 nA VCC = ±5 V or ±15 V, TA = 25°C 6
Input offset current IOS 400 nA VCC = ±5 V or ±15 V, TA = full range 6
Common-mode rejection ratio CMRR 74 dB VCC = ±15 V, VICR = ±12 V, TA = full range 7
Common-mode rejection ratio CMRR 85 dB VCC = ±5 V, VICR = ±2.5 V, TA = full range 7
Output voltage swing VO 12 12.9 V VCC = ±15 V, RL = 250 Ω 7
Output voltage swing VO 3 3.5 V VCC = ±5 V, RL = 150 Ω 7
Output voltage swing VO 13 13.6 V VCC = ±15 V, RL = 1 kΩ 7
Output voltage swing VO 3.4 3.8 V VCC = ±5 V, RL = 1 kΩ 7
Output current IO 80 200 mA VCC = ±15 V, RL = 10 Ω 7
Output current IO 50 160 mA VCC = ±5 V, RL = 10 Ω 7
Supply voltage, dual supply VCC 4.5 16.5 V Dual supply 7
Supply voltage, single supply VCC 9 33 V Single supply 7
Supply current (per amplifier) ICC 7.5 10 mA VCC = ±15 V, TA = 25°C 7
Supply current (per amplifier) ICC 11 mA VCC = ±15 V, TA = full range 7
Supply current (per amplifier) ICC 6.5 9 mA VCC = ±5 V, TA = 25°C 7
Supply current (per amplifier) ICC 10.5 mA VCC = ±5 V, TA = full range 7
Power-supply rejection ratio PSRR 80 dB VCC = ±5 V or ±15 V, TA = full range 7

CAD (KiCad official)

  • Symbol: THS4022IDGN
  • Footprint: Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm
  • 3D model: HVSSOP-8-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ths4022idgn-etched.step / ths4022idgn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ths4022idgn.step / ths4022idgn.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 207ca8d05ac08ea5, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF