Generated by kicad-footprint-generator · KiCad file format 20260206
THS3110IDGNR
Texas Instruments · Operational Amplifier · HVSSOP-8-EP
THS3110IDGNR from Texas Instruments, in a HVSSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference pin that sets the power-down thresholds; its usable range is VS− ≤ VREF ≤ (VS+ − 4 V), and if left unterminated it floats to the positive rail, outside that range. |
| 2 | VIN− | power_in | Inverting input of the current-feedback amplifier; common-mode range is specified as ±12.5 V minimum at ±15 V supplies and ±2.8 V minimum at ±5 V supplies. |
| 3 | VIN+ | power_in | Noninverting input of the current-feedback amplifier; common-mode range is specified as ±12.5 V minimum at ±15 V supplies and ±2.8 V minimum at ±5 V supplies. |
| 4 | VS− | power_in | Negative power supply; dual supply ±5 V to ±15 V or single supply 10 V to 30 V, with total supply VS− to VS+ not to exceed 33 V absolute maximum. |
| 5 | NC | unconnected | No internal connection. |
| 6 | VOUT | output | Amplifier output; absolute maximum output current is 300 mA. |
| 7 | VS+ | power_in | Positive power supply; dual supply ±5 V to ±15 V or single supply 10 V to 30 V, with total supply VS− to VS+ not to exceed 33 V absolute maximum. |
| 8 | PD | input | Power-down pin (THS3110 only) that enables the amplifier when PD ≤ REF + 0.8 V and disables it when PD ≥ REF + 2 V, defaulting to the ON state if no signal is applied. |
| 9 | PowerPAD | passive | Exposed thermal pad that is electrically isolated from all other pins and must be connected to a thermally dissipating plane for proper power dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-8-EP |
| Category | Amplifiers/Comparators |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Transimpedance | 0.5 | 1 | MΩ | VS = ±15 V, VO = ±3.75 V, gain = 1; over -40°C to +85°C | 4 | ||
| Input offset voltage | 3 | 12 | mV | VS = ±15 V, VCM = 0 V; over -40°C to +85°C | 4 | ||
| Noninverting input bias current | 1 | 6 | μA | VS = ±15 V, VCM = 0 V; over -40°C to +85°C | 4 | ||
| Inverting input bias current | 1.5 | 20 | μA | VS = ±15 V, VCM = 0 V; over -40°C to +85°C | 4 | ||
| Input offset current | 2.5 | 20 | μA | VS = ±15 V, VCM = 0 V; over -40°C to +85°C | 4 | ||
| Input common-mode voltage range | 12.5 | 13.3 | V | VS = ±15 V; over -40°C to +85°C | 4 | ||
| Common-mode rejection ratio | CMRR | 60 | 68 | dB | VS = ±15 V, VCM = ±12.5 V; over -40°C to +85°C | 4 | |
| Output voltage swing | 12.5 | 13.5 | V | VS = ±15 V, RL = 1 kΩ; over -40°C to +85°C | 4 | ||
| Output voltage swing | 12 | 13.4 | V | VS = ±15 V, RL = 100 Ω; over -40°C to +85°C | 4 | ||
| Output current (sourcing) | 175 | 260 | mA | VS = ±15 V, RL = 25 Ω; over -40°C to +85°C | 4 | ||
| Output current (sinking) | 175 | 260 | mA | VS = ±15 V, RL = 25 Ω; over -40°C to +85°C | 4 | ||
| Recommended maximum slew rate for repetitive signals | 900 | V/μs | 4 | ||||
| Specified operating voltage | 15 | 16 | V | Over -40°C to +85°C column | 5 | ||
| Maximum quiescent current | 4.8 | 7.5 | mA | VS = ±15 V; over -40°C to +85°C | 5 | ||
| Minimum quiescent current | 2.5 | 4.8 | mA | VS = ±15 V; over -40°C to +85°C | 5 | ||
| Power-supply rejection (+PSRR) | 60 | 75 | dB | VS+ = 15.5 V to 14.5 V, VS- = 15 V; over -40°C to +85°C | 5 | ||
| Power-supply rejection (-PSRR) | 55 | 69 | dB | VS+ = 15 V, VS- = -15.5 V to -14.5 V; over -40°C to +85°C | 5 | ||
| Power-down quiescent current (THS3110 only) | 270 | 500 | μA | VS = ±15 V, PD ≥ REF + 2 V; over -40°C to +85°C | 5 | ||
| Transimpedance | 0.5 | 1 | MΩ | VS = ±5 V, VO = ±1.25 V, gain = 1; over -40°C to +85°C | 6 | ||
| Input offset voltage | 6 | 12 | mV | VS = ±5 V, VCM = 0 V; over -40°C to +85°C | 6 | ||
| Noninverting input bias current | 1 | 6 | μA | VS = ±5 V, VCM = 0 V; over -40°C to +85°C | 6 | ||
| Inverting input bias current | 1 | 10 | μA | VS = ±5 V, VCM = 0 V; over -40°C to +85°C | 6 | ||
| Input offset current | 1 | 8 | μA | VS = ±5 V, VCM = 0 V; over -40°C to +85°C | 6 | ||
| Input common-mode voltage range | 2.8 | 3.2 | V | VS = ±5 V; over -40°C to +85°C | 6 | ||
| Common-mode rejection ratio | CMRR | 58 | 65 | dB | VS = ±5 V, VCM = ±2.5 V; over -40°C to +85°C | 6 | |
| Output voltage swing | 3.6 | 4 | V | VS = ±5 V, RL = 1 kΩ; over -40°C to +85°C | 6 | ||
| Output voltage swing | 3.5 | 3.8 | V | VS = ±5 V, RL = 100 Ω; over -40°C to +85°C | 6 | ||
| Output current (sourcing) | 125 | 220 | mA | VS = ±5 V, RL = 10 Ω; over -40°C to +85°C | 6 | ||
| Output current (sinking) | 125 | 220 | mA | VS = ±5 V, RL = 10 Ω; over -40°C to +85°C | 6 | ||
| Specified operating voltage | 4.5 | 5 | V | Over -40°C to +85°C column | 7 | ||
| Maximum quiescent current | 4 | 7 | mA | VS = ±5 V; over -40°C to +85°C | 7 | ||
| Minimum quiescent current | 2 | 4 | mA | VS = ±5 V; over -40°C to +85°C | 7 | ||
| Power-supply rejection (+PSRR) | 57 | 71 | dB | VS+ = 5.5 V to 4.5 V, VS- = 5 V; over -40°C to +85°C | 7 | ||
| Power-supply rejection (-PSRR) | 52 | 66 | dB | VS+ = 5 V, VS- = -5.5 V to -4.5 V; over -40°C to +85°C | 7 | ||
| Power-down quiescent current (THS3110 only) | 200 | 500 | μA | VS = ±5 V, PD ≥ REF + 2 V; over -40°C to +85°C | 7 | ||
| Supply voltage, dual supply | VS | 5 | 15 | V | Dual supply | 3 | |
| Supply voltage, single supply | VS | 10 | 30 | V | Single supply | 3 | |
| Operating free-air temperature, industrial | TA | -40 | 85 | °C | Industrial grade | 3 | |
| Operating junction temperature, continuous operating temperature | TJ | -40 | 125 | °C | 3 | ||
| Normal storage temperature | TSTG | -40 | 85 | °C | 3 | ||
| Supply voltage, VS- to VS+ | VS | 33 | V | 3 | |||
| Differential input voltage | VID | -4 | 4 | V | 3 | ||
| Output current | IO | 300 | mA | See footnote 2 (PowerPAD must be connected) | 3 | ||
| Maximum junction temperature | TJ | 150 | °C | Absolute maximum | 3 | ||
| Maximum junction temperature, continuous operation | TJ | 125 | °C | Continuous operation, long-term reliability | 3 | ||
| Operating free-air temperature, industrial | TA | -40 | 85 | °C | Industrial grade | 3 | |
| Storage temperature | Tstg | -65 | 125 | °C | 3 | ||
| ESD rating, HBM | 900 | Human body model; unit not printed | 3 | ||||
| ESD rating, CDM | 1500 | Charged device model; unit not printed | 3 | ||||
| ESD rating, MM | 200 | Machine model; unit not printed | 3 | ||||
| Thermal resistance, junction-to-case | θJC | 4.7 | °C/W | DGN-8 (HVSSOP PowerPAD) | 2 | ||
| Thermal resistance, junction-to-ambient | θJA | 58.4 | °C/W | DGN-8; 2 oz trace, pad soldered to 3 in × 3 in PCB | 2 | ||
| Power rating | 1.71 | W | DGN-8, TA = +25°C, TJ = +125°C | 2 | |||
| Power rating | 685 | mW | DGN-8, TA = +85°C, TJ = +125°C | 2 | |||
| Thermal shutdown threshold | 160 | °C | Approximate junction temperature; amplifier turns back on near +140°C | 23 |
CAD (KiCad official)
- Symbol:
THS3110IDGNR - Footprint:
Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm - 3D model: HVSSOP-8-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ths3110idgnr-etched.step/ths3110idgnr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ths3110idgnr.step/ths3110idgnr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
1616dcdb60c85e85, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).