main
Ray thp210dgkt: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 10a64b9
{
  "slug": "thp210dgkt",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Precision Op Amps, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "thp210dgkt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "thp210dgkt.kicad_sym",
    "thp210dgkt.kicad_mod",
    "thp210dgkt.glb",
    "thp210dgkt.step",
    "thp210dgkt.lbr",
    "docs/hero.png",
    "docs/thp210dgkt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "THP210DGKT",
    "manufacturer": "Texas Instruments",
    "package": "VSSOP-8",
    "pin_count": 8,
    "category": "Amplifiers/Comparators",
    "subcategory": "Precision Op Amps",
    "datasheet": "https://www.ti.com/cn/lit/gpn/thp210",
    "parts": {
      "symbol": "thp210dgkt.kicad_sym",
      "footprint": "thp210dgkt.kicad_mod",
      "model_3d": "thp210dgkt-etched.glb",
      "model_3d_plain": "thp210dgkt.glb",
      "model_3d_step": "thp210dgkt-etched.step",
      "model_3d_step_plain": "thp210dgkt.step",
      "lbr": "thp210dgkt.lbr"
    },
    "distributor_links": {
      "lcsc": "C2875834",
      "digikey": "296-THP210DGKTTR-ND",
      "mouser": "595-THP210DGKT"
    },
    "distributor_check": {
      "checked_at": "2026-09-27T05:47:02Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-THP210DGKTTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-THP210DGKT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN–",
        "type": "input",
        "description": "Inverting amplifier input; differential voltage between IN+ and IN- limited to ±0.5 V maximum with input current limited to ±10 mA maximum."
      },
      {
        "number": "2",
        "name": "VOCM",
        "type": "input",
        "description": "Output common-mode voltage control input with input impedance of 2.5 MΩ || 1 pF; valid voltage range from VVS- + 1 V to VVS+ - 1 V at ±2.5 V supply or VVS- + 2 V to VVS+ - 2 V at ±18 V supply."
      },
      {
        "number": "3",
        "name": "VS+",
        "type": "power_in",
        "description": "Positive power-supply input; dual-supply operating range ±1.5 V to ±18 V or single-supply range 3 V to 36 V."
      },
      {
        "number": "4",
        "name": "OUT+",
        "type": "output",
        "description": "Noninverting amplifier output with maximum output current ±50 mA; output voltage swing minimum 230 mV from positive rail at ±18 V supply."
      },
      {
        "number": "5",
        "name": "OUT–",
        "type": "output",
        "description": "Inverting amplifier output with maximum output current ±50 mA; output voltage swing minimum 230 mV from negative rail at ±18 V supply."
      },
      {
        "number": "6",
        "name": "VS–",
        "type": "power_in",
        "description": "Negative power-supply input; dual-supply operating range ±1.5 V to ±18 V or single-supply range 3 V to 36 V."
      },
      {
        "number": "7",
        "name": "PD",
        "type": "input",
        "description": "Power-down control input referenced to VS+; logic low (less than VS+ - 2.0 V) disables amplifier reducing quiescent current to less than 20 µA; logic high enables normal operation."
      },
      {
        "number": "8",
        "name": "IN+",
        "type": "input",
        "description": "Noninverting amplifier input; differential voltage between IN+ and IN- limited to ±0.5 V maximum with input current limited to ±10 mA maximum."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 45,
        "cost_usd": 0.3219,
        "at": "2026-09-27T05:46:46"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/thp210",
        "pages": 45,
        "sha256": "c7f6404d2bae11a1",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "thp210dgkt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.1,
          2.0,
          0.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "thp210dgkt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.1,
          2.0,
          0.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ae714685aa8a7b7642b3d8733450167fe1d0d4bb650c8620370bb9b35694f654",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}