main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tfptl15l5001fh5b: viewers · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
README.md tfptl15l5001fh5b: CAD wording names the Adom_Gen land, not KiCad official · Ray
tfptl15l5001fh5b-etched.glb Publish 0.1.0 · Ray
tfptl15l5001fh5b-etched.step tfptl15l5001fh5b: factory component page (tier=mfr) · Ray
tfptl15l5001fh5b-hero.glb Publish 0.1.1 · Ray
tfptl15l5001fh5b-hero.overlay.json Publish 0.1.1 · Ray
tfptl15l5001fh5b.glb Publish 0.1.0 · Ray
tfptl15l5001fh5b.kicad_mod tfptl15l5001fh5b: no pin-1 polarity bar on an unpolarised two-terminal land · Ray
tfptl15l5001fh5b.kicad_sym Publish 0.1.0 · Ray
tfptl15l5001fh5b.lbr tfptl15l5001fh5b: no pin-1 polarity bar on an unpolarised two-terminal land · Ray
tfptl15l5001fh5b.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 2 pins · Ray

TFPTL15L5001FH5B

Vishay / Dale · Sensors, Transducers · Radial

TFPTL15L5001FH5B from Vishay / Dale, in a Radial. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1 passive First wire lead of the non-polarized nickel thin film PTC thermistor, tinned copper clad steel wire with d = 0.5 mm ±10 % and L = 25 mm min. for bulk packing; the H5 lead spacing is 5.0 ± 0.8 mm.
2 2 passive Second wire lead of the non-polarized thermistor, with the same 0.5 mm ±10 % wire diameter; maximum working voltage is 40 V and maximum rated power at 70 °C is 100 mW for size L15.

Key specifications

Parameter Value
Manufacturer Vishay / Dale
Package Radial
Category Sensors, Transducers
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Tolerance on R25-value (F = ±1 %) -1 1 % suffix F = ±1 % 1
Tolerance on TCR at 25 °C -400 400 ppm/K at 25 °C 1
Operating temperature range at rated power -55 70 °C at rated power 1
Operating temperature range at zero dissipation -55 150 °C at zero dissipation 1
Maximum rated power at 70 °C P70 100 mW at 70 °C 1
Maximum working voltage (rated continuous working voltage) RCWV 40 V see note (3) 1
Ratio tolerance -4 4 % low temp -55 °C, high temp +150 °C 4
Ratio tolerance -3 3 % low temp -40 °C, high temp +125 °C 4
Ratio tolerance -2 2 % low temp -20 °C, high temp +85 °C 4
Ratio tolerance -1 1 % low temp 0 °C, high temp +55 °C 4
Ratio tolerance -0.5 0.5 % low temp +12 °C, high temp +40 °C 4
ΔR25/R25 after storage dry heat ΔR25/R25 -0.25 0.25 % 5000 h at 125 °C 3
ΔR25/R25 after high temperature exposure ΔR25/R25 -0.3 0.3 % 1000 h at 150 °C 3
ΔR25/R25 after damp heat steady state, unloaded ΔR25/R25 -0.2 0.2 % 1344 h at 40 °C/95 % RH 3
ΔR25/R25 after thermal cycling ΔR25/R25 -0.2 0.2 % 15 min at -55 °C, 15 min at 150 °C, 100 cycles 3
ΔR25/R25 after short time overload ΔR25/R25 -0.2 0.2 % 2.5 x P70 for 60 s at 70 °C 3
ΔR25/R25 after long term dissipation ΔR25/R25 -0.2 0.2 % 1000 h rated power at 70 °C 3
ΔR25/R25 after resistance to soldering heat ΔR25/R25 -0.25 0.25 % 10 s at 260 °C 3
Response time (in oil) 1.6 s in oil 1
Dissipation factor δ δ 3.4 mW/K for information only 1
Resistance value at 25 °C R25 5 kΩ at 25 °C, part value 5001 (printed 5K) 1
TCR at 25 °C 4110 ppm/K at 25 °C 1

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts steel clad steel wire leads. 1

CAD (Adom-generated)

  • Symbol: TFPTL15L5001FH5B
  • Footprint: Adom_Gen:Vishay_Dale_TFPTL15
  • 3D model: generated to fit the land (STEP)
  • 3D model files: tfptl15l5001fh5b-etched.step / tfptl15l5001fh5b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tfptl15l5001fh5b.step / tfptl15l5001fh5b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Vishay / Dale datasheet (5 pp, sha256 37dbc9bf4db18bf0, retrieved 2026-11-03, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF