main
Ray tfptl15l2201jl2b: CAD wording names the Adom_Gen land, not KiCad official b00e52a

TFPTL15L2201JL2B

Vishay Dale · Sensors, Transducers · Radial

TFPTL15L2201JL2B from Vishay Dale, in a Radial. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1 passive First wire lead of the nickel thin film PTC thermistor (non-polarized, tinned copper clad steel, d = 0.5 mm ±10 %, L = 25 mm min., 5.2 mm max seating height for L2 size L15).
2 2 passive Second wire lead of the nickel thin film PTC thermistor (non-polarized, 2.5 mm ±0.8 mm lead spacing F for L2 straight leads, 2200 Ω ±5 % at 25 °C).

Key specifications

Parameter Value
Manufacturer Vishay Dale
Package Radial
Category Sensors, Transducers
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Resistance value at 25 °C (TFPTL15L2201JL2B, 2.2K) R25 2.2 KΩ Printed as 2.2K in part number 2201; TFPTL15 range 100 to 5K 1
Tolerance on R25-value (J = ±5 %) R25 -5 5 % Tolerance code J = ±5 % 1
TCR at 25 °C TCR 4110 ppm/K at 25 °C 1
Tolerance on TCR at 25 °C TCR -400 400 ppm/K at 25 °C 1
Maximum working voltage (rated continuous working voltage) RCWV 40 V TFPTL15 column; note 3: maximum working voltage or whichever is less (rest of note not printed) 1
Maximum rated power at 70 °C P70 100 mW at 70 °C 1
Operating temperature range, at rated power -55 70 °C at rated power 1
Operating temperature range, at zero dissipation -55 150 °C at zero dissipation 1
Dissipation factor δ (for information only) δ 3.4 mW/K TFPTL15 column; for information only 1
Response time 1.6 s in oil; TFPTL15 column (printed ≈ 1.6 s) 1
Storage dry heat ΔR25/R25 -0.25 0.25 % 5000 h at 125 °C 3
High temperature exposure ΔR25/R25 -0.3 0.3 % 1000 h at 150 °C 3
Damp heat steady state, unloaded ΔR25/R25 -0.2 0.2 % 1344 h at 40 °C/95 % RH 3
Thermal cycling (100 cycles) ΔR25/R25 -0.2 0.2 % 15 min at -55 °C, 15 min at 150 °C, 100 cycles 3
Thermal cycling (1000 cycles) ΔR25/R25 -0.2 0.2 % 15 min at -55 °C, 15 min at 125 °C, 1000 cycles 3
Short time overload ΔR25/R25 -0.2 0.2 % 2.5 x P70 for 60 s at 70 °C 3
Long term dissipation ΔR25/R25 -0.2 0.2 % 1000 h rated power at 70 °C 3
Resistance to soldering heat ΔR25/R25 -0.25 0.25 % 10 s at 260 °C 3
Ratio tolerance (low temp -55 °C to high temp +150 °C) R/R25 -4 4 % low temp -55 °C, high temp +150 °C 4
Ratio tolerance (low temp -40 °C to high temp +125 °C) R/R25 -3 3 % low temp -40 °C, high temp +125 °C 4
Ratio tolerance (low temp -20 °C to high temp +85 °C) R/R25 -2 2 % low temp -20 °C, high temp +85 °C 4
Ratio tolerance (low temp 0 °C to high temp +55 °C) R/R25 -1 1 % low temp 0 °C, high temp +55 °C 4
Ratio tolerance (low temp +12 °C to high temp +40 °C) R/R25 -0.5 0.5 % low temp +12 °C, high temp +40 °C 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts steel clad steel wire leads. 1

CAD (Adom-generated)

  • Symbol: TFPTL15L2201JL2B
  • Footprint: Adom_Gen:Vishay_Dale_TFPTL15
  • 3D model: generated to fit the land (STEP)
  • 3D model files: tfptl15l2201jl2b-etched.step / tfptl15l2201jl2b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tfptl15l2201jl2b.step / tfptl15l2201jl2b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Vishay Dale datasheet (5 pp, sha256 37dbc9bf4db18bf0, retrieved 2026-11-04, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF