TFPTL10L1001FL2B
Public Made by Adomby adom
Vishay Intertech Sensors, THT, P=2.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
9318fb5
TFPTL10L1001FL2B
Vishay Intertech · Sensors · THT, P=2.5mm
TFPTL10L1001FL2B from Vishay Intertech, in a THT, P=2.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Lead 1 | passive | Tinned copper clad steel wire lead (d = 0.5 mm ± 10 %, L = 25 mm min. in bulk) of the nickel thin film PTC element; the element is non-polarized, with lead spacing F = 2.5 ± 0.8 mm for the L2 straight-lead type. |
| 2 | Lead 2 | passive | Second tinned copper clad steel wire lead of the non-polarized 1 kΩ ±1 % PTC element, rated for -55 to +70 °C at rated power (75 mW at 70 °C) and -55 to +150 °C at zero dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | THT, P=2.5mm |
| Category | Sensors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance value at 25 °C (R25) | R25 | 1000 | Ω | 1001 = 1K, TFPTL10 size | 1 | ||
| Tolerance on R25-value | R25 | -1 | 1 | % | F = ±1 % | 1 | |
| Tolerance on TCR at 25 °C | TCR | -400 | 400 | ppm/K | at 25 °C | 1 | |
| TCR at 25 °C | TCR | 4110 | ppm/K | at 25 °C | 1 | ||
| Operating temperature range | -55 | 70 | °C | at rated power | 1 | ||
| Operating temperature range | -55 | 150 | °C | at zero dissipation | 1 | ||
| Maximum rated power at 70 °C | P70 | 75 | mW | at 70 °C, TFPTL10 | 1 | ||
| Maximum working voltage (rated continuous working voltage) | RCWV | 30 | V | TFPTL10; maximum working voltage or whichever is less | 1 | ||
| Ratio tolerance | R/R25 | -4 | 4 | % | low temp -55 °C, high temp +150 °C | 4 | |
| Ratio tolerance | R/R25 | -3 | 3 | % | low temp -40 °C, high temp +125 °C | 4 | |
| Ratio tolerance | R/R25 | -2 | 2 | % | low temp -20 °C, high temp +85 °C | 4 | |
| Ratio tolerance | R/R25 | -1 | 1 | % | low temp 0 °C, high temp +55 °C | 4 | |
| Ratio tolerance | R/R25 | -0.5 | 0.5 | % | low temp +12 °C, high temp +40 °C | 4 | |
| Maximum ΔR25/R25 drift, storage dry heat | ΔR25/R25 | -0.25 | 0.25 | % | 5000 h at 125 °C | 3 | |
| Maximum ΔR25/R25 drift, high temperature exposure | ΔR25/R25 | -0.3 | 0.3 | % | 1000 h at 150 °C | 3 | |
| Maximum ΔR25/R25 drift, damp heat steady state | ΔR25/R25 | -0.2 | 0.2 | % | 1344 h at 40 °C/95 % RH, unloaded | 3 | |
| Maximum ΔR25/R25 drift, thermal cycling | ΔR25/R25 | -0.2 | 0.2 | % | 15 min at -55 °C, 15 min at 150 °C, 100 cycles | 3 | |
| Maximum ΔR25/R25 drift, short time overload | ΔR25/R25 | -0.2 | 0.2 | % | 2.5 x P70 for 60 s at 70 °C | 3 | |
| Maximum ΔR25/R25 drift, long term dissipation | ΔR25/R25 | -0.2 | 0.2 | % | 1000 h rated power at 70 °C | 3 | |
| Maximum ΔR25/R25 drift, resistance to soldering heat | ΔR25/R25 | -0.25 | 0.25 | % | 10 s at 260 °C | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | steel | clad steel wire leads. | 1 |
CAD (Adom-generated)
- Symbol:
TFPTL10L1001FL2B - Footprint:
Adom_Gen:Vishay_Dale_TFPTL10 - 3D model: generated to fit the land (STEP)
- 3D model files:
tfptl10l1001fl2b-etched.step/tfptl10l1001fl2b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tfptl10l1001fl2b.step/tfptl10l1001fl2b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (5 pp, sha256
37dbc9bf4db18bf0, retrieved 2026-11-03, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.
# TFPTL10L1001FL2B
**Vishay Intertech** · Sensors · THT, P=2.5mm
TFPTL10L1001FL2B from Vishay Intertech, in a THT, P=2.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Lead 1 | passive | Tinned copper clad steel wire lead (d = 0.5 mm ± 10 %, L = 25 mm min. in bulk) of the nickel thin film PTC element; the element is non-polarized, with lead spacing F = 2.5 ± 0.8 mm for the L2 straight-lead type. |
| 2 | Lead 2 | passive | Second tinned copper clad steel wire lead of the non-polarized 1 kΩ ±1 % PTC element, rated for -55 to +70 °C at rated power (75 mW at 70 °C) and -55 to +150 °C at zero dissipation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | THT, P=2.5mm |
| Category | Sensors |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance value at 25 °C (R25) | R25 | | 1000 | | Ω | 1001 = 1K, TFPTL10 size | 1 |
| Tolerance on R25-value | R25 | -1 | | 1 | % | F = ±1 % | 1 |
| Tolerance on TCR at 25 °C | TCR | -400 | | 400 | ppm/K | at 25 °C | 1 |
| TCR at 25 °C | TCR | | 4110 | | ppm/K | at 25 °C | 1 |
| Operating temperature range | | -55 | | 70 | °C | at rated power | 1 |
| Operating temperature range | | -55 | | 150 | °C | at zero dissipation | 1 |
| Maximum rated power at 70 °C | P70 | | | 75 | mW | at 70 °C, TFPTL10 | 1 |
| Maximum working voltage (rated continuous working voltage) | RCWV | | | 30 | V | TFPTL10; maximum working voltage or whichever is less | 1 |
| Ratio tolerance | R/R25 | -4 | | 4 | % | low temp -55 °C, high temp +150 °C | 4 |
| Ratio tolerance | R/R25 | -3 | | 3 | % | low temp -40 °C, high temp +125 °C | 4 |
| Ratio tolerance | R/R25 | -2 | | 2 | % | low temp -20 °C, high temp +85 °C | 4 |
| Ratio tolerance | R/R25 | -1 | | 1 | % | low temp 0 °C, high temp +55 °C | 4 |
| Ratio tolerance | R/R25 | -0.5 | | 0.5 | % | low temp +12 °C, high temp +40 °C | 4 |
| Maximum ΔR25/R25 drift, storage dry heat | ΔR25/R25 | -0.25 | | 0.25 | % | 5000 h at 125 °C | 3 |
| Maximum ΔR25/R25 drift, high temperature exposure | ΔR25/R25 | -0.3 | | 0.3 | % | 1000 h at 150 °C | 3 |
| Maximum ΔR25/R25 drift, damp heat steady state | ΔR25/R25 | -0.2 | | 0.2 | % | 1344 h at 40 °C/95 % RH, unloaded | 3 |
| Maximum ΔR25/R25 drift, thermal cycling | ΔR25/R25 | -0.2 | | 0.2 | % | 15 min at -55 °C, 15 min at 150 °C, 100 cycles | 3 |
| Maximum ΔR25/R25 drift, short time overload | ΔR25/R25 | -0.2 | | 0.2 | % | 2.5 x P70 for 60 s at 70 °C | 3 |
| Maximum ΔR25/R25 drift, long term dissipation | ΔR25/R25 | -0.2 | | 0.2 | % | 1000 h rated power at 70 °C | 3 |
| Maximum ΔR25/R25 drift, resistance to soldering heat | ΔR25/R25 | -0.25 | | 0.25 | % | 10 s at 260 °C | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | steel | | clad steel wire leads. | 1 |
## CAD (Adom-generated)
- Symbol: `TFPTL10L1001FL2B`
- Footprint: `Adom_Gen:Vishay_Dale_TFPTL10`
- 3D model: generated to fit the land (STEP)
- 3D model files: `tfptl10l1001fl2b-etched.step` / `tfptl10l1001fl2b-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tfptl10l1001fl2b.step` / `tfptl10l1001fl2b.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Vishay Intertech datasheet](https://www.vishay.com/docs/33027/tfptl.pdf) (5 pp, sha256 `37dbc9bf4db18bf0`, retrieved 2026-11-03, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.
[Datasheet PDF](docs/tfptl10l1001fl2b-datasheet.pdf)