component
TF0216-USQ
Public Made by Adomby adom
TFSS Gate Drivers, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTF0216-USQ
TFSS · Gate Drivers · SOT-23-5L
TF0216-USQ from TFSS, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN* | input | Logic input that is out of phase with OUT for the TF0216 (in phase with OUT* on the TF0215); leave open when not in use, and logic levels are TTL/CMOS compatible down to 3.3V. |
| 2 | COM | power_in | Supply return (ground) pin, which the datasheet says can withstand up to 5V positive or negative without damage. |
| 3 | IN | input | Logic input that is in phase with OUT for the TF0216 (out of phase with OUT* on the TF0215); leave open when not in use, and the logic input range is 0 to 5V. |
| 4 | OUT | output | Gate drive output for the TF0216 (printed as OUT*/OUT on the package); output swings from 0 to VCC and is rated for 1.9A peak source and 1.8A peak sink, and it tolerates 500mA of reverse current forced back into it. |
| 5 | VCC | power_in | Low-side supply input with a 4.5V to 18V recommended operating range and internal undervoltage lockout that turns off the output when VCC falls below operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TFSS |
| Package | SOT-23-5L |
| Category | Motor Driver ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 4.5 | 18 | V | 3 | ||
| Output voltage (OUT/OUT*) | VOUT | 0 | V | 3 | |||
| Logic input voltage (IN) | VIN | 0 | 5 | V | 3 | ||
| Ambient temperature | TA | -40 | 125 | °C | 3 | ||
| Low-side fixed supply voltage | VCC | -0.3 | 22 | V | 3 | ||
| Output voltage (OUT/OUT*) | VOUT | -0.3 | V | 3 | |||
| Logic input voltage (IN) | VIN | -5 | V | 3 | |||
| Storage temperature | Tstg | -55 | 150 | °C | 3 | ||
| Logic 1 input voltage | VIH | 2.4 | V | 4 | |||
| Output high short circuit pulsed current | IO+ | 1.9 | A | VCC = 12V | 4 | ||
| Output low short circuit pulsed current | IO- | 1.8 | A | VCC = 12V | 4 | ||
| Logic 1 input voltage (over temperature) | VIH | 2.4 | V | 5 | |||
| Junction operating temperature | TJ | 150 | °C | 3 | |||
| Lead temperature (soldering) | TL | 300 | °C | soldering, 10 seconds | 3 | ||
| ESD protection HBM | 2 | kV | HBM, all pins | 3 | |||
| ESD protection MM | 400 | V | MM, all pins | 3 | |||
| Logic 0 input voltage | VIL | 0.8 | V | 4 | |||
| Logic 1 input bias current | IIN+ | 5 | mA | VIN = 3V, VIN* = 0V | 4 | ||
| Logic 0 input bias current | IIN- | 2 | mA | VIN = 0V, VIN* = 3V | 4 | ||
| High level output voltage (VBIAS - VO) | VOH | 25 | mV | 4 | |||
| Low level output voltage | VOL | 25 | mV | 4 | |||
| VCC quiescent supply current | ICCQ | 50 | 100 | mA | VIN = 0V or 3V | 4 | |
| Output Resistance, High | ROH | 3.3 | W | IOUT = 10mA, VCC = 12V | 4 | ||
| Output Resistance, Low | ROL | 2.3 | W | IOUT = 10mA, VCC = 12V | 4 | ||
| Turn-on rise time | tr | 15 | 25 | ns | CL = 1000pF, VCC = 12V | 4 | |
| Turn-off fall time | tf | 15 | 25 | ns | CL = 1000pF, VCC = 12V | 4 | |
| Turn-on propagation delay | ton | 35 | 50 | ns | VCC = 12V | 4 | |
| Turn-off propagation delay | toff | 35 | 55 | ns | VCC = 12V | 4 | |
| Logic 0 input voltage (over temperature) | VIL | 0.8 | V | 5 | |||
| Logic 1 input bias current (over temperature) | IIN+ | 10 | mA | VIN = 3V | 5 | ||
| Logic 0 input bias current (over temperature) | IIN- | 0 | 5 | mA | VIN = 0V | 5 | |
| High level output voltage (VBIAS - VO) (over temperature) | VOH | 25 | mV | 5 | |||
| Low level output voltage (over temperature) | VOL | 25 | mV | 5 | |||
| VCC quiescent supply current (over temperature) | ICCQ | 0.1 | 0.2 | mA | VIN = 0V or 3V | 5 | |
| Output Resistance, High (over temperature) | ROH | 10 | W | IOUT = 10mA, VCC = 12V | 5 | ||
| Output Resistance, Low (over temperature) | ROL | 7 | W | IOUT = 10mA, VCC = 12V | 5 | ||
| Turn-on rise time (over temperature) | tr | 30 | 40 | ns | CL = 1000pF, VCC = 12V | 5 | |
| Turn-off fall time (over temperature) | tf | 30 | 40 | ns | CL = 1000pF, VCC = 12V | 5 | |
| Turn-on propagation delay (over temperature) | ton | 45 | 55 | ns | VCC = 12V | 5 | |
| Turn-off propagation delay (over temperature) | toff | 50 | 60 | ns | VCC = 12V | 5 |
CAD (KiCad official)
- Symbol:
TF0216-USQ - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
tf0216-usq-etched.step/tf0216-usq-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tf0216-usq.step/tf0216-usq.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TFSS datasheet (8 pp, sha256
e51aedd7295792da, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).