component
TEA2025L-D16-T
Public Made by Adomby adom
UTC Unisonic Tech Audio Amplifiers, DIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 14d ago |
| viewers | 14d ago |
| package.json | 14d ago |
| page.json | 14d ago |
| README.md | 14d ago |
| tea2025l-d16-t-etched.glb | 14d ago |
| tea2025l-d16-t-etched.step | 14d ago |
| tea2025l-d16-t-hero.glb | 14d ago |
| tea2025l-d16-t-hero.overlay.json | 14d ago |
| tea2025l-d16-t.glb | 14d ago |
| tea2025l-d16-t.kicad_mod | 14d ago |
| tea2025l-d16-t.kicad_sym | 14d ago |
| tea2025l-d16-t.lbr | 14d ago |
| tea2025l-d16-t.step | 14d ago |
TEA2025L-D16-T
UTC Unisonic Tech · Audio Amplifiers · DIP-16
TEA2025L-D16-T from UTC Unisonic Tech, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BRIDGE | output | Bridge-mode output providing the reduced CH1 output signal via an internal divider, connected through a capacitor to pin 6 for bridge operation. |
| 2 | OUT.2 | output | Channel 2 power amplifier output, rated for 1.5 A peak output current. |
| 3 | BOOT.2 | passive | Channel 2 bootstrap pin, with a suggested 100uF capacitor to increase output swing. |
| 4 | GND | power_in | Ground pin, connected to ground in the application circuit. |
| 5 | GND | power_in | Ground pin, connected to ground in the application circuit. |
| 6 | FEEDBACK | input | Channel 2 inverting input/feedback pin, where gain is set by the on-chip resistors with external Rf and C1 in series to ground (gain not below 36 dB recommended). |
| 7 | IN.2 (+) | input | Channel 2 non-inverting input, tied to ground in bridge mode. |
| 8 | SVR | passive | Supply voltage rejection decoupling pin, with a 100uF capacitor to ground in the application circuit. |
| 9 | GND (sub) | power_in | Substrate ground pin, connected to ground. |
| 10 | IN.1 (+) | input | Channel 1 non-inverting input, with a PNP input stage allowing the source to be ground-referenced; input impedance is 30 kOhm typical. |
| 11 | FEEDBACK | input | Channel 1 inverting input/feedback pin, where gain is set by the on-chip resistors with external Rf and C1 in series to ground. |
| 12 | GND | power_in | Ground pin, connected to ground in the application circuit. |
| 13 | GND | power_in | Ground pin, connected to ground in the application circuit. |
| 14 | BOOT.1 | passive | Channel 1 bootstrap pin, with a suggested 100uF capacitor to increase output swing. |
| 15 | OUT.1 | output | Channel 1 power amplifier output, rated for 1.5 A peak output current. |
| 16 | +Vs | power_in | Positive supply, operating range 3 V to 12 V with an absolute maximum of 15 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UTC Unisonic Tech |
| Package | DIP-16 |
| Category | Amplifiers/Comparators |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Peak Output Current | IO (peak) | 1.5 | A | 3 | |||
| Junction Temperature | TJ | 150 | C | 3 | |||
| Operating Temperature | TOPR | -20 | 85 | °C | 3 | ||
| Storage Temperature | TSTG | -40 | 150 | °C | 3 | ||
| Supply Voltage | VSS | 15 | V | 3 | |||
| Thermal Resistance Junction to ambient | θJA | 60 | °C/W | 3 | |||
| Thermal Resistance Junction to case | θJC | 15 | °C/W | 3 | |||
| Voltage Gain Stereo | GV | 43 | 45 | 47 | dB | Stereo | 3 |
| Voltage Gain Bridge | GV | 49 | 51 | 53 | dB | Bridge | 3 |
| Voltage Gain Difference | GV | -1 | 1 | dB | 3 | ||
| Gain reduction limit via Rf (recommended not to reduce below) | 36 | dB | Voltage gain adjusted with external Rf; recommended not to reduce gain under 36 dB | 4 |
CAD (KiCad official)
- Symbol:
TEA2025L-D16-T - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: DIP-16 (KiCad packages3D, STEP)
- 3D model files:
tea2025l-d16-t-etched.step/tea2025l-d16-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tea2025l-d16-t.step/tea2025l-d16-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UTC Unisonic Tech datasheet (7 pp, sha256
8760fef14d02874f, retrieved 2026-10-14, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).