← Commit history

Initial commit: component/tdc7200pwr

Ray ·ba8c5710b5 ·
2 files changed +227
README.mdadded+50
@@ -0,0 +1,50 @@+# TDC7200PWR++**Texas Instruments** · ADCs/DACs - Special Purpose · TSSOP-14++TDC7200PWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | ENABLE | input | Enable signal to TDC input, active high, provides reset to all digital circuits with 1-100 ns rise/fall time |+| 2 | TRIGG | output | Trigger output signal, rising or falling edge selectable via TRIGG_EDGE bit in CONFIG1 register |+| 3 | START | input | START signal input for time-of-flight measurement, rising or falling edge selectable, 10 ns minimum pulse width |+| 4 | STOP | input | STOP signal input for time-of-flight measurement, rising or falling edge selectable, 10 ns minimum pulse width, supports up to 5 consecutive stops |+| 5 | CLOCK | input | Clock input for TDC calibration and time base, frequency 1 to 16 MHz required for accurate picosecond resolution operation |+| 6 | N.C. | unconnected | Not Connected |+| 7 | GND | power_in | Ground, supply voltage reference for TDC7200 device |+| 8 | INTB | output | Interrupt output to MCU, active low open drain output, VOL 0.35-0.99 V typical, signals measurement completion |+| 9 | DOUT | output | SPI Data Output, high impedance when inactive, VOH 2.31-2.95 V typical, VOL 0.35-0.99 V typical |+| 10 | DIN | input | SPI Data Input for TDC configuration and register access, setup time 4 ns, hold time 4 ns |+| 11 | CSB | input | SPI Chip Select active low, enables SPI communication when low, 40 ns minimum CSB high time between transactions |+| 12 | SCLK | input | SPI clock input, maximum frequency 20 MHz, can idle high or low, 50 ns minimum period at fSCLK = 20 MHz |+| 13 | VREG | power_out | LDO Output terminal for external decoupling capacitor, capacitance 0.4-2.7 µF ceramic, ESR maximum 100 mΩ |+| 14 | VDD | power_in | Power Supply input voltage 2-3.6 V, requires 100 nF ceramic bypass capacitor close to pin |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-14 |+| Category | Data Acquisition |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `TDC7200PWR`+- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`+- 3D model: TSSOP-14 (KiCad packages3D, STEP)+- 3D model files: `tdc7200pwr-etched.step` / `tdc7200pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tdc7200pwr.step` / `tdc7200pwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tdc7200.pdf) (52 pp, sha256 `0a0accdd4231b23e`, retrieved 2026-09-24, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tdc7200pwr-datasheet.pdf)
page.jsonadded+177
@@ -0,0 +1,177 @@+{+  "slug": "tdc7200pwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments ADCs/DACs - Special Purpose, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "tdc7200pwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tdc7200pwr.kicad_sym",+    "tdc7200pwr.kicad_mod",+    "tdc7200pwr.glb",+    "tdc7200pwr.step",+    "tdc7200pwr.lbr",+    "docs/hero.png",+    "docs/tdc7200pwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TDC7200PWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-14",+    "pin_count": 14,+    "category": "Data Acquisition",+    "subcategory": "ADCs/DACs - Special Purpose",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tdc7200.pdf",+    "parts": {+      "symbol": "tdc7200pwr.kicad_sym",+      "footprint": "tdc7200pwr.kicad_mod",+      "model_3d": "tdc7200pwr-etched.glb",+      "model_3d_plain": "tdc7200pwr.glb",+      "model_3d_step": "tdc7200pwr-etched.step",+      "model_3d_step_plain": "tdc7200pwr.step",+      "lbr": "tdc7200pwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2653139"+    },+    "pins": [+      {+        "number": "1",+        "name": "ENABLE",+        "type": "input",+        "description": "Enable signal to TDC input, active high, provides reset to all digital circuits with 1-100 ns rise/fall time"+      },+      {+        "number": "2",+        "name": "TRIGG",+        "type": "output",+        "description": "Trigger output signal, rising or falling edge selectable via TRIGG_EDGE bit in CONFIG1 register"+      },+      {+        "number": "3",+        "name": "START",+        "type": "input",+        "description": "START signal input for time-of-flight measurement, rising or falling edge selectable, 10 ns minimum pulse width"+      },+      {+        "number": "4",+        "name": "STOP",+        "type": "input",+        "description": "STOP signal input for time-of-flight measurement, rising or falling edge selectable, 10 ns minimum pulse width, supports up to 5 consecutive stops"+      },+      {+        "number": "5",+        "name": "CLOCK",+        "type": "input",+        "description": "Clock input for TDC calibration and time base, frequency 1 to 16 MHz required for accurate picosecond resolution operation"+      },+      {+        "number": "6",+        "name": "N.C.",+        "type": "unconnected",+        "description": "Not Connected"+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Ground, supply voltage reference for TDC7200 device"+      },+      {+        "number": "8",+        "name": "INTB",+        "type": "output",+        "description": "Interrupt output to MCU, active low open drain output, VOL 0.35-0.99 V typical, signals measurement completion"+      },+      {+        "number": "9",+        "name": "DOUT",+        "type": "output",+        "description": "SPI Data Output, high impedance when inactive, VOH 2.31-2.95 V typical, VOL 0.35-0.99 V typical"+      },+      {+        "number": "10",+        "name": "DIN",+        "type": "input",+        "description": "SPI Data Input for TDC configuration and register access, setup time 4 ns, hold time 4 ns"+      },+      {+        "number": "11",+        "name": "CSB",+        "type": "input",+        "description": "SPI Chip Select active low, enables SPI communication when low, 40 ns minimum CSB high time between transactions"+      },+      {+        "number": "12",+        "name": "SCLK",+        "type": "input",+        "description": "SPI clock input, maximum frequency 20 MHz, can idle high or low, 50 ns minimum period at fSCLK = 20 MHz"+      },+      {+        "number": "13",+        "name": "VREG",+        "type": "power_out",+        "description": "LDO Output terminal for external decoupling capacitor, capacitance 0.4-2.7 µF ceramic, ESR maximum 100 mΩ"+      },+      {+        "number": "14",+        "name": "VDD",+        "type": "power_in",+        "description": "Power Supply input voltage 2-3.6 V, requires 100 nF ceramic bypass capacitor close to pin"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 52,+        "cost_usd": 0.4269,+        "at": "2026-09-24T02:47:34"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/tdc7200.pdf",+        "pages": 52,+        "sha256": "0a0accdd4231b23e",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file