← Commit history

Publish 0.1.2

Ray ·3e14d1847f · ·parent c02b87f
2 files changed +561−39
package.json+552−31
@@ -1,6 +1,6 @@ {   "slug": "tda7293v",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",   "description": "STMicroelectronics Audio Amplifiers, MultiwAtt-15. Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -29,7 +29,8 @@     "viewers/footprint.html",     "tda7293v-hero.glb",     "tda7293v-hero.overlay.json",-    "tda7293v-etched.glb"+    "tda7293v-etched.glb",+    "tda7293v-etched.step"   ],   "component": {     "mpn": "TDA7293V",@@ -43,7 +44,7 @@       "symbol": "tda7293v.kicad_sym",       "footprint": "tda7293v.kicad_mod",       "model_3d": "tda7293v-hero.glb",-      "model_3d_plain": "tda7293v-etched.glb",+      "model_3d_plain": "tda7293v.glb",       "model_3d_step": "tda7293v-etched.step",       "model_3d_step_plain": "tda7293v.step",       "lbr": "tda7293v.lbr"@@ -70,91 +71,91 @@         "number": "1",         "name": "STAND-BY GND",         "type": "power_in",-        "description": "Reference pin for the standby and mute thresholds, with standby-on and mute-on at or below 1.5 V and standby-off and mute-off at or above 3.5 V relative to this pin."+        "description": "Stand-by ground; the stand-by and mute thresholds are referenced to this pin, and its voltage is limited to 90 V referred to -VS."       },       {         "number": "2",-        "name": "IN-",+        "name": "INVERTING INPUT",         "type": "input",-        "description": "Inverting signal input with 100 kΩ typical input resistance; closed-loop gain is set by R2 = 680 Ω (about 30 dB), which must stay at or above 26 dB."+        "description": "Inverting input; limited to 90 V referred to -VS and to ±30 V differential against the non-inverting input."       },       {         "number": "3",-        "name": "IN+",+        "name": "NON INVERTING INPUT",         "type": "input",-        "description": "Non-inverting signal input with 100 kΩ typical input resistance, with R1 (22 kΩ) and R3 (22 kΩ) set per the recommended application circuit."+        "description": "Non-inverting input; limited to 90 V referred to -VS, and in slave devices this input is connected to the negative supply."       },       {         "number": "4",-        "name": "SGND",+        "name": "SIGNAL GROUND",         "type": "power_in",-        "description": "Signal ground, referenced to -VS (pin 8) with a maximum of 90 V, and also the slave-function pin that must be tied to the negative supply in modular (parallel) operation, where slave is at or below 1 V and master is at or above 3 V relative to pin 8."+        "description": "Signal ground, limited to 90 V referred to -VS; it also sets the slave/master function, where at or below -VS+1 V it selects slave and at or above -VS+3 V it selects master."       },       {         "number": "5",-        "name": "CLIP DET",+        "name": "CLIP AND SHORT CIRCUIT DETECTOR",         "type": "output",-        "description": "Clip detector output with a duty cycle of about 30 to 50 % at d = 10 % (10 kΩ pull-up to 5 V) and leakage of 3 µA maximum at 50 W; its voltage is rated at 120 V referred to -VS."+        "description": "Clip and short-circuit detector output, limited to 120 V referred to -VS and used with a pull-up resistor (for example 10 kΩ to 5 V)."       },       {         "number": "6",         "name": "BOOTSTRAP",         "type": "passive",-        "description": "Bootstrap node, rated 120 V referred to -VS, where the bootstrap capacitor connects either to the output (pin 14) or to the bootstrap loader (pin 12)."+        "description": "Bootstrap capacitor connection (to OUT pin 14 or to bootstrap loader pin 12), limited to 120 V referred to -VS."       },       {         "number": "7",-        "name": "-VS (SIGNAL)",+        "name": "+VS (SIGNAL)",         "type": "power_in",-        "description": "Negative signal supply for the small-signal circuitry, to be bypassed with 100 nF per the application circuit."+        "description": "Positive supply for the signal part; supply range is ±12 V to ±50 V."       },       {         "number": "8",-        "name": "-VS (POWER)",+        "name": "-VS (SIGNAL)",         "type": "power_in",-        "description": "Negative power supply and device tab; all voltage ratings (for example standby, mute and input voltages) are referenced to this pin."+        "description": "Negative supply for the signal part, the reference for the absolute maximum voltages, connected to the tab."       },       {         "number": "9",         "name": "STAND-BY",         "type": "input",-        "description": "CMOS-logic-compatible standby control, with standby-on at or below 1.5 V and standby-off at or above 3.5 V relative to pin 1, and a maximum applicable voltage equal to the operating supply voltage."+        "description": "Stand-by control input, CMOS logic compatible, with on threshold of 1.5 V max and off threshold of 3.5 V min referred to pin 1, and limited to 120 V referred to -VS."       },       {         "number": "10",         "name": "MUTE",         "type": "input",-        "description": "CMOS-logic-compatible mute control, with mute-on at or below 1.5 V and mute-off at or above 3.5 V relative to pin 1, rated 120 V referred to -VS."+        "description": "Mute control input, CMOS logic compatible, with on threshold of 1.5 V max and off threshold of 3.5 V min referred to pin 1, and limited to 120 V referred to -VS."       },       {         "number": "11",         "name": "BUFFER DRIVER",-        "type": "output",-        "description": "Output of the internal unity-gain buffer, used only for modular connection, with a maximum external load of 1 MΩ / 10 pF and intended for test purposes only."+        "type": "bidirectional",+        "description": "Buffer driver pin used only for modular (parallel) connection of devices, limited to 120 V referred to -VS."       },       {         "number": "12",         "name": "BOOTSTRAP LOADER",         "type": "passive",-        "description": "Bootstrap loader pin rated 100 V referred to -VS, which follows the output up to 100 V and stays clamped at 100 V for higher output voltages."+        "description": "Bootstrap loader that follows the output voltage up to 100 V and is clamped at 100 V above that, allowing a maximum supply voltage of 120 V when the bootstrap capacitor is connected to pin 6."       },       {         "number": "13",         "name": "+VS (POWER)",         "type": "power_in",-        "description": "Positive power supply pin for the output stage, which is bootstrapped in high-efficiency operation; supply range is ±12 V to ±50 V with ±60 V absolute maximum (no signal)."+        "description": "Positive supply for the power stage, which can be bootstrapped in high-efficiency applications; supply range is ±12 V to ±50 V."       },       {         "number": "14",         "name": "OUT",         "type": "output",-        "description": "Amplifier output, rated for up to 10 A peak output current, with a current limiter threshold of 6.5 A typical for VS ≤ ±40 V."+        "description": "Power amplifier output with 10 A peak output current limit and current limiter threshold of 6.5 A typ at VS up to ±40 V."       },       {         "number": "15",-        "name": "+VS (SIGNAL)",+        "name": "-VS (POWER)",         "type": "power_in",-        "description": "Positive signal supply for the small-signal circuitry, with supply range ±12 V to ±50 V and ±60 V absolute maximum (no signal)."+        "description": "Negative supply for the power stage, which can be bootstrapped in high-efficiency applications; supply range is ±12 V to ±50 V."       }     ],     "provenance": {@@ -171,6 +172,12 @@         "described": 15,         "cites_pages": true,         "refuses_to_fabricate": true+      },+      "correction": {+        "at": "2026-11-05",+        "what": "5 of 15 pins corrected",+        "how": "pinout replaced from review decision: ray (review: Colby request 1387) (); the previous pinout came from an earlier extraction",+        "symbol": "regenerated from the corrected pinout"       }     },     "viewers": {@@ -190,8 +197,8 @@           5.68,           20.5         ],-        "zmin_mm": -3.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": -3,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "9d98a0a8b6f95ade37d2d77943cd80eaebb9bce3179868dc39afb75ddca6a928",         "checked": "2026-11-05",@@ -209,13 +216,527 @@           5.68,           20.5         ],-        "zmin_mm": -3.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": -3,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "762b5939dbb77666ffcc0a648a4427e3dba9849da9a31d333359455fc9023975",         "checked": "2026-11-05",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]-  }+  },+  "title": "TDA7293V",+  "brief": "STMicroelectronics Audio Amplifiers, MultiwAtt-15. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+  "metadata": {+    "specs": {+      "Manufacturer": "STMicroelectronics",+      "Package": "MultiwAtt-15",+      "Category": "Amplifiers/Comparators",+      "Pins": "15"+    },+    "characteristics": {+      "version": 1,+      "source": "datasheet",+      "datasheet_sha256": "fd1710e573ad0bf35735326eedeb81684bfe9b8be0711e1427bf7c8f7c068697",+      "rows": [+        {+          "name": "Supply range",+          "symbol": "VS",+          "kind": "electrical",+          "unit": "V",+          "min": 12,+          "typ": null,+          "max": 50,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Quiescent current",+          "symbol": "Iq",+          "kind": "electrical",+          "unit": "mA",+          "min": null,+          "typ": 50,+          "max": 100,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Input bias current",+          "symbol": "Ib",+          "kind": "electrical",+          "unit": "µA",+          "min": null,+          "typ": 0.3,+          "max": 1,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Input offset voltage",+          "symbol": "VOS",+          "kind": "tolerance",+          "unit": "mV",+          "min": -10,+          "typ": null,+          "max": 10,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Input offset current",+          "symbol": "IOS",+          "kind": "electrical",+          "unit": "µA",+          "min": null,+          "typ": null,+          "max": 0.2,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Continuous output power",+          "symbol": "PO",+          "kind": "electrical",+          "unit": "W",+          "min": 75,+          "typ": 80,+          "max": null,+          "conditions": "d = 1%, RL = 4 Ω, VS = ±29 V",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Continuous output power",+          "symbol": "PO",+          "kind": "electrical",+          "unit": "W",+          "min": 90,+          "typ": 100,+          "max": null,+          "conditions": "d = 10%, RL = 4Ω, VS = ±29 V",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Total harmonic distortion",+          "symbol": "d",+          "kind": "electrical",+          "unit": "%",+          "min": null,+          "typ": null,+          "max": 0.1,+          "conditions": "PO = 0.1 to 50 W, f = 20 Hz to 15 kHz",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Slew rate",+          "symbol": "SR",+          "kind": "electrical",+          "unit": "V/µs",+          "min": 5,+          "typ": 10,+          "max": null,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Closed loop voltage gain",+          "symbol": "GV",+          "kind": "electrical",+          "unit": "dB",+          "min": 29,+          "typ": 30,+          "max": 31,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Total input noise",+          "symbol": "eN",+          "kind": "electrical",+          "unit": "µV",+          "min": null,+          "typ": 3,+          "max": 10,+          "conditions": "f = 20 Hz to 20 kHz",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Input resistance",+          "symbol": "Ri",+          "kind": "electrical",+          "unit": "kΩ",+          "min": 100,+          "typ": null,+          "max": null,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Standby on threshold",+          "symbol": "VST on",+          "kind": "electrical",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 1.5,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Standby off threshold",+          "symbol": "VST off",+          "kind": "electrical",+          "unit": "V",+          "min": 3.5,+          "typ": null,+          "max": null,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Standby attenuation",+          "symbol": "ATTst-by",+          "kind": "electrical",+          "unit": "dB",+          "min": 70,+          "typ": 90,+          "max": null,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Quiescent current @ standby",+          "symbol": "Iq st-by",+          "kind": "electrical",+          "unit": "mA",+          "min": null,+          "typ": 0.5,+          "max": 1,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Mute on threshold",+          "symbol": "VMon",+          "kind": "electrical",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 1.5,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Mute off threshold",+          "symbol": "VMoff",+          "kind": "electrical",+          "unit": "V",+          "min": 3.5,+          "typ": null,+          "max": null,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Mute attenuation",+          "symbol": "ATTmute",+          "kind": "electrical",+          "unit": "dB",+          "min": 60,+          "typ": 80,+          "max": null,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Duty cycle (pin 5)",+          "symbol": "Duty",+          "kind": "electrical",+          "unit": "%",+          "min": 30,+          "typ": 40,+          "max": 50,+          "conditions": "d = 10%, RPULLUP = 10 kΩ to 5 V",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "Clip detector leakage current",+          "symbol": "ICLEAK",+          "kind": "electrical",+          "unit": "µA",+          "min": null,+          "typ": null,+          "max": 3,+          "conditions": "PO = 50 W",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "Slave threshold (pin 4, ref. pin 8)",+          "symbol": "VSlave",+          "kind": "electrical",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 1,+          "conditions": "",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "Master threshold (pin 4, ref. pin 8)",+          "symbol": "VMaster",+          "kind": "electrical",+          "unit": "V",+          "min": 3,+          "typ": null,+          "max": null,+          "conditions": "",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "Supply voltage (no signal)",+          "symbol": "VS",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": -60,+          "typ": null,+          "max": 60,+          "conditions": "no signal",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "VSTANDBY GND voltage referred to -VS (pin 8)",+          "symbol": "V1",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 90,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Input voltage (inverting) referred to -VS",+          "symbol": "V2",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 90,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Maximum differential inputs",+          "symbol": "V2 - V3",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": -30,+          "typ": null,+          "max": 30,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Input voltage (non inverting) referred to -VS",+          "symbol": "V3",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 90,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Signal GND voltage referred to -VS",+          "symbol": "V4",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 90,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Clip detector voltage referred to -VS",+          "symbol": "V5",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 120,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Bootstrap voltage referred to -VS",+          "symbol": "V6",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 120,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Standby voltage referred to -VS",+          "symbol": "V9",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 120,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Mute voltage referred to -VS",+          "symbol": "V10",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 120,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Buffer voltage referred to -VS",+          "symbol": "V11",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 120,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Bootstrap loader voltage referred to -VS",+          "symbol": "V12",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 100,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Output peak current",+          "symbol": "IO",+          "kind": "absolute_maximum",+          "unit": "A",+          "min": null,+          "typ": null,+          "max": 10,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Power dissipation",+          "symbol": "Ptot",+          "kind": "absolute_maximum",+          "unit": "W",+          "min": null,+          "typ": null,+          "max": 50,+          "conditions": "Tcase = 70°C",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Storage and junction temperature",+          "symbol": "Tstg, Tj",+          "kind": "absolute_maximum",+          "unit": "°C",+          "min": null,+          "typ": null,+          "max": 150,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "ESD maximum withstanding voltage (HBM)",+          "symbol": "VESD_HBM",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": -1500,+          "typ": null,+          "max": 1500,+          "conditions": "CDF-AEC-Q100-002 human body model",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Operating ambient temperature range",+          "symbol": "Top",+          "kind": "recommended_operating",+          "unit": "°C",+          "min": 0,+          "typ": null,+          "max": 70,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Thermal resistance junction to case",+          "symbol": "Rthj-case",+          "kind": "thermal",+          "unit": "°C/W",+          "min": null,+          "typ": 1,+          "max": 1.5,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        }+      ]+    }+  },+  "discovery_triggers": [+    "tda7293v"+  ],+  "discovery_pitch": "TDA7293V (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",+  "visibility": "public" }
page.json+9−8
@@ -4,7 +4,7 @@   "slug": "tda7293v",   "title": "TDA7293V",   "brief": "STMicroelectronics Audio Amplifiers, MultiwAtt-15. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -25,7 +25,7 @@       "symbol": "tda7293v.kicad_sym",       "footprint": "tda7293v.kicad_mod",       "model_3d": "tda7293v-hero.glb",-      "model_3d_plain": "tda7293v-etched.glb",+      "model_3d_plain": "tda7293v.glb",       "model_3d_step": "tda7293v-etched.step",       "model_3d_step_plain": "tda7293v.step",       "lbr": "tda7293v.lbr"@@ -747,10 +747,11 @@     "viewers/footprint.html",     "tda7293v-hero.glb",     "tda7293v-hero.overlay.json",-    "tda7293v-etched.glb"+    "tda7293v-etched.glb",+    "tda7293v-etched.step"   ],-  "visibility": {-    "public": true-  },-  "updated_at": "2026-11-06T00:47:35.638Z"-}+  "visibility": "public",+  "updated_at": "2026-11-06T00:47:35.638Z",+  "description": "STMicroelectronics Audio Amplifiers, MultiwAtt-15. Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file