component
TD62783APG
Public Made by Adomby adom
TOSHIBA Darlington Transistor Arrays, DIP-18. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
TD62783APG
TOSHIBA · Darlington Transistor Arrays · DIP-18
TD62783APG from TOSHIBA, in a DIP-18. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I1 | input | Input pin for channel 1; the input must be at least 2.0 V to turn the output on and at most 0.6 V to turn it off, with an absolute maximum input voltage of 30 V. |
| 2 | I2 | input | Input pin for channel 2; the input must be at least 2.0 V to turn the output on and at most 0.6 V to turn it off, with an absolute maximum input voltage of 30 V. |
| 3 | I3 | input | Input pin for channel 3; the input must be at least 2.0 V to turn the output on and at most 0.6 V to turn it off, with an absolute maximum input voltage of 30 V. |
| 4 | I4 | input | Input pin for channel 4; the input must be at least 2.0 V to turn the output on and at most 0.6 V to turn it off, with an absolute maximum input voltage of 30 V. |
| 5 | I5 | input | Input pin for channel 5; the input must be at least 2.0 V to turn the output on and at most 0.6 V to turn it off, with an absolute maximum input voltage of 30 V. |
| 6 | I6 | input | Input pin for channel 6; the input must be at least 2.0 V to turn the output on and at most 0.6 V to turn it off, with an absolute maximum input voltage of 30 V. |
| 7 | I7 | input | Input pin for channel 7; the input must be at least 2.0 V to turn the output on and at most 0.6 V to turn it off, with an absolute maximum input voltage of 30 V. |
| 8 | I8 | input | Input pin for channel 8; the input must be at least 2.0 V to turn the output on and at most 0.6 V to turn it off, with an absolute maximum input voltage of 30 V. |
| 9 | VCC | power_in | Power supply pin; the operating supply range is 2.0 V to 50 V, with an absolute maximum rating of -0.5 to 50 V. |
| 10 | GND | power_in | Ground pin for the device. |
| 11 | O8 | output | DMOS source-type output for channel 8, rated up to 50 V (max) with up to -500 mA (max) per channel and a built-in clamp diode for inductive loads. |
| 12 | O7 | output | DMOS source-type output for channel 7, rated up to 50 V (max) with up to -500 mA (max) per channel and a built-in clamp diode for inductive loads. |
| 13 | O6 | output | DMOS source-type output for channel 6, rated up to 50 V (max) with up to -500 mA (max) per channel and a built-in clamp diode for inductive loads. |
| 14 | O5 | output | DMOS source-type output for channel 5, rated up to 50 V (max) with up to -500 mA (max) per channel and a built-in clamp diode for inductive loads. |
| 15 | O4 | output | DMOS source-type output for channel 4, rated up to 50 V (max) with up to -500 mA (max) per channel and a built-in clamp diode for inductive loads. |
| 16 | O3 | output | DMOS source-type output for channel 3, rated up to 50 V (max) with up to -500 mA (max) per channel and a built-in clamp diode for inductive loads. |
| 17 | O2 | output | DMOS source-type output for channel 2, rated up to 50 V (max) with up to -500 mA (max) per channel and a built-in clamp diode for inductive loads. |
| 18 | O1 | output | DMOS source-type output for channel 1, rated up to 50 V (max) with up to -500 mA (max) per channel and a built-in clamp diode for inductive loads. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TOSHIBA |
| Package | DIP-18 |
| Category | Transistors/Thyristors |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.5 | 50 | V | Ta = 25°C | 3 | |
| Output current (for each channel) | IOUT | -500 | mA | Ta = 25°C | 3 | ||
| Input voltage | VIN | -0.5 | 30 | V | Ta = 25°C | 3 | |
| Clamp diode reverse voltage | VR | 50 | V | Ta = 25°C | 3 | ||
| Clamp diode forward current | IF | 500 | mA | Ta = 25°C | 3 | ||
| Power dissipation (PG package, device alone) | PD | 1.47 | W | PG package, device alone; derate 11.8 mW/°C when Ta exceeds 25°C | 3 | ||
| Operating temperature | Topr | -40 | 85 | °C | 3 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 3 | ||
| Power supply voltage | VCC | 2 | 50 | V | IOUT = -100 mA | 4 | |
| Output current (PG package, 1 circuit ON) | IOUT | 0 | -400 | mA | 1 circuit ON, Ta = 25°C, tpw = 25 ms | 4 | |
| Output current (PG package, 8 circuits ON, Duty 10%) | IOUT | 0 | -390 | mA | 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 10% | 4 | |
| Output current (PG package, 8 circuits ON, Duty 50%) | IOUT | 0 | -170 | mA | 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 50% | 4 | |
| Input voltage (output on) | VIN(ON) | 2 | 25 | V | IOUT = -100 mA or upper, VDS = 2.0 V | 4 | |
| Input voltage (output off) | VIN(OFF) | 0 | 0.6 | V | IOUT = -100 μA or less, VDS = 2.0 V | 4 | |
| Clamp diode forward current | IF | 400 | mA | 4 | |||
| Output leakage current | Ileak | 1 | μA | VCC = 50 V, VIN = 0 V, Ta = 85°C | 5 | ||
| Output voltage (VDS) | VDS | 0.56 | 1.14 | V | IOUT = -350 mA, VIN = 5.0 V, VCC = 5.0 V | 5 | |
| Output ON-resistance (RON) | RON | 1.6 | 3.25 | Ω | IOUT = -350 mA, VIN = 5.0 V, VCC = 5.0 V | 5 | |
| Output voltage (VDS) | VDS | 0.32 | 0.65 | V | IOUT = -200 mA, VIN = 5.0 V, VCC = 5.0 V | 5 | |
| Output voltage (VDS) | VDS | 0.16 | 0.325 | V | IOUT = -100 mA, VIN = 5.0 V, VCC = 5.0 V | 5 | |
| Input current (output on) | IIN(ON) | 0.1 | mA | VIN = 2.0 V | 5 | ||
| Input current (output off) | IIN(OFF) | 1 | μA | VIN = 0 V, Ta = 85°C | 5 | ||
| Input voltage (output on) | VIN(ON) | 2 | V | IOUT = -100 mA or upper, VDS = 2.0 V | 5 | ||
| Supply current (for each channel) | ICC | 1.5 | mA | VIN = 2.0 V, VCC = 50 V, Output open | 5 | ||
| Clamp diode reverse current | IR | 1 | μA | VR = 50 V, Ta = 85°C | 5 | ||
| Clamp diode forward voltage | VF | 2 | V | IF = 350 mA | 5 |
CAD (KiCad official)
- Symbol:
TD62783APG - Footprint:
Package_DIP:DIP-18_W7.62mm - 3D model: DIP-18 (KiCad packages3D, STEP)
- 3D model files:
td62783apg-etched.step/td62783apg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);td62783apg.step/td62783apg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TOSHIBA datasheet (11 pp, sha256
eb378c4d8e50807f, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TD62783APG
**TOSHIBA** · Darlington Transistor Arrays · DIP-18
TD62783APG from TOSHIBA, in a DIP-18. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I1 | input | Input pin for channel 1; the input must be at least 2.0 V to turn the output on and at most 0.6 V to turn it off, with an absolute maximum input voltage of 30 V. |
| 2 | I2 | input | Input pin for channel 2; the input must be at least 2.0 V to turn the output on and at most 0.6 V to turn it off, with an absolute maximum input voltage of 30 V. |
| 3 | I3 | input | Input pin for channel 3; the input must be at least 2.0 V to turn the output on and at most 0.6 V to turn it off, with an absolute maximum input voltage of 30 V. |
| 4 | I4 | input | Input pin for channel 4; the input must be at least 2.0 V to turn the output on and at most 0.6 V to turn it off, with an absolute maximum input voltage of 30 V. |
| 5 | I5 | input | Input pin for channel 5; the input must be at least 2.0 V to turn the output on and at most 0.6 V to turn it off, with an absolute maximum input voltage of 30 V. |
| 6 | I6 | input | Input pin for channel 6; the input must be at least 2.0 V to turn the output on and at most 0.6 V to turn it off, with an absolute maximum input voltage of 30 V. |
| 7 | I7 | input | Input pin for channel 7; the input must be at least 2.0 V to turn the output on and at most 0.6 V to turn it off, with an absolute maximum input voltage of 30 V. |
| 8 | I8 | input | Input pin for channel 8; the input must be at least 2.0 V to turn the output on and at most 0.6 V to turn it off, with an absolute maximum input voltage of 30 V. |
| 9 | VCC | power_in | Power supply pin; the operating supply range is 2.0 V to 50 V, with an absolute maximum rating of -0.5 to 50 V. |
| 10 | GND | power_in | Ground pin for the device. |
| 11 | O8 | output | DMOS source-type output for channel 8, rated up to 50 V (max) with up to -500 mA (max) per channel and a built-in clamp diode for inductive loads. |
| 12 | O7 | output | DMOS source-type output for channel 7, rated up to 50 V (max) with up to -500 mA (max) per channel and a built-in clamp diode for inductive loads. |
| 13 | O6 | output | DMOS source-type output for channel 6, rated up to 50 V (max) with up to -500 mA (max) per channel and a built-in clamp diode for inductive loads. |
| 14 | O5 | output | DMOS source-type output for channel 5, rated up to 50 V (max) with up to -500 mA (max) per channel and a built-in clamp diode for inductive loads. |
| 15 | O4 | output | DMOS source-type output for channel 4, rated up to 50 V (max) with up to -500 mA (max) per channel and a built-in clamp diode for inductive loads. |
| 16 | O3 | output | DMOS source-type output for channel 3, rated up to 50 V (max) with up to -500 mA (max) per channel and a built-in clamp diode for inductive loads. |
| 17 | O2 | output | DMOS source-type output for channel 2, rated up to 50 V (max) with up to -500 mA (max) per channel and a built-in clamp diode for inductive loads. |
| 18 | O1 | output | DMOS source-type output for channel 1, rated up to 50 V (max) with up to -500 mA (max) per channel and a built-in clamp diode for inductive loads. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TOSHIBA |
| Package | DIP-18 |
| Category | Transistors/Thyristors |
| Pins | 18 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.5 | | 50 | V | Ta = 25°C | 3 |
| Output current (for each channel) | IOUT | | | -500 | mA | Ta = 25°C | 3 |
| Input voltage | VIN | -0.5 | | 30 | V | Ta = 25°C | 3 |
| Clamp diode reverse voltage | VR | | | 50 | V | Ta = 25°C | 3 |
| Clamp diode forward current | IF | | | 500 | mA | Ta = 25°C | 3 |
| Power dissipation (PG package, device alone) | PD | | | 1.47 | W | PG package, device alone; derate 11.8 mW/°C when Ta exceeds 25°C | 3 |
| Operating temperature | Topr | -40 | | 85 | °C | | 3 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 3 |
| Power supply voltage | VCC | 2 | | 50 | V | IOUT = -100 mA | 4 |
| Output current (PG package, 1 circuit ON) | IOUT | 0 | | -400 | mA | 1 circuit ON, Ta = 25°C, tpw = 25 ms | 4 |
| Output current (PG package, 8 circuits ON, Duty 10%) | IOUT | 0 | | -390 | mA | 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 10% | 4 |
| Output current (PG package, 8 circuits ON, Duty 50%) | IOUT | 0 | | -170 | mA | 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 50% | 4 |
| Input voltage (output on) | VIN(ON) | 2 | | 25 | V | IOUT = -100 mA or upper, VDS = 2.0 V | 4 |
| Input voltage (output off) | VIN(OFF) | 0 | | 0.6 | V | IOUT = -100 μA or less, VDS = 2.0 V | 4 |
| Clamp diode forward current | IF | | | 400 | mA | | 4 |
| Output leakage current | Ileak | | | 1 | μA | VCC = 50 V, VIN = 0 V, Ta = 85°C | 5 |
| Output voltage (VDS) | VDS | | 0.56 | 1.14 | V | IOUT = -350 mA, VIN = 5.0 V, VCC = 5.0 V | 5 |
| Output ON-resistance (RON) | RON | | 1.6 | 3.25 | Ω | IOUT = -350 mA, VIN = 5.0 V, VCC = 5.0 V | 5 |
| Output voltage (VDS) | VDS | | 0.32 | 0.65 | V | IOUT = -200 mA, VIN = 5.0 V, VCC = 5.0 V | 5 |
| Output voltage (VDS) | VDS | | 0.16 | 0.325 | V | IOUT = -100 mA, VIN = 5.0 V, VCC = 5.0 V | 5 |
| Input current (output on) | IIN(ON) | | | 0.1 | mA | VIN = 2.0 V | 5 |
| Input current (output off) | IIN(OFF) | | | 1 | μA | VIN = 0 V, Ta = 85°C | 5 |
| Input voltage (output on) | VIN(ON) | | | 2 | V | IOUT = -100 mA or upper, VDS = 2.0 V | 5 |
| Supply current (for each channel) | ICC | | | 1.5 | mA | VIN = 2.0 V, VCC = 50 V, Output open | 5 |
| Clamp diode reverse current | IR | | | 1 | μA | VR = 50 V, Ta = 85°C | 5 |
| Clamp diode forward voltage | VF | | | 2 | V | IF = 350 mA | 5 |
## CAD (KiCad official)
- Symbol: `TD62783APG`
- Footprint: `Package_DIP:DIP-18_W7.62mm`
- 3D model: DIP-18 (KiCad packages3D, STEP)
- 3D model files: `td62783apg-etched.step` / `td62783apg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `td62783apg.step` / `td62783apg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [TOSHIBA datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588896395935272960) (11 pp, sha256 `eb378c4d8e50807f`, retrieved 2026-10-16, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/td62783apg-datasheet.pdf)