TD5830C

{
  "slug": "td5830c",
  "version": "0.1.0",
  "type": "component",
  "description": "Techcode Semicon Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "td5830c",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "td5830c.kicad_sym",
    "td5830c.kicad_mod",
    "td5830c.glb",
    "td5830c.step",
    "td5830c.lbr",
    "docs/hero.png",
    "docs/td5830c-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "td5830c-hero.glb",
    "td5830c-hero.overlay.json",
    "td5830c-etched.glb"
  ],
  "component": {
    "mpn": "TD5830C",
    "manufacturer": "Techcode Semicon",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602996913465802752",
    "parts": {
      "symbol": "td5830c.kicad_sym",
      "footprint": "td5830c.kicad_mod",
      "model_3d": "td5830c-hero.glb",
      "model_3d_plain": "td5830c-etched.glb",
      "model_3d_step": "td5830c-etched.step",
      "model_3d_step_plain": "td5830c.step",
      "lbr": "td5830c.lbr"
    },
    "distributor_links": {
      "lcsc": "C7545732"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T20:26:12Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PGOOD",
        "type": "output",
        "description": "Open-drain output that asserts high once VO reaches 92% of its rating voltage."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable input (active high): a logic low shuts down the output, and the logic-high threshold is 1.2 V minimum with logic-low at 0.2 V maximum."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Input voltage (1.2 V to 5.5 V recommended); large bulk capacitance should be placed close to this pin, with a 10 µF ceramic capacitor recommended."
      },
      {
        "number": "4",
        "name": "VDD",
        "type": "power_in",
        "description": "Input voltage for the control circuit, 3.0 V to 5.5 V per the recommended operating conditions; VDD must be greater than VOUT + 1.7 V."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected."
      },
      {
        "number": "6",
        "name": "VOUT",
        "type": "power_out",
        "description": "Power output of the device; a pull-low resistance (typically 150 Ω) exists when the device is disabled via VEN."
      },
      {
        "number": "7",
        "name": "ADJ",
        "type": "input",
        "description": "Sets the output voltage through external feedback resistors, with Vo = 0.8 × (R1+R2)/R2 V; R2 (ADJ to GND) should be 1 kΩ to 24 kΩ."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Reference ground."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The ADJ description is split across a page break on page 2 and the printed text reads 'TD5831' (appa; The datasheet names the feedback pin both 'ADJ' (pin table, page 2) and 'FB' (text and block referen; The pin table says PGOOD asserts 'high' while the output is open-drain; the datasheet gives no pull-",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0525,
        "at": "2026-10-18T20:24:01"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602996913465802752",
        "pages": 16,
        "sha256": "65451ff3007e25f9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "td5830c.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f1718a42c5ea007e8e2dd672ac39a1bb358ee4849bd53c42e21ce83e0e5df7a9",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "td5830c-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ce13fcfe8d04b5780de55c4f10859ad257d5c429fc79437c41e30903245c9694",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}