Generated by adom_assets · KiCad file format 20240108
TD521D485H-A
VISOM · RS485 Bus Modules · DIP-8
TD521D485H-A from VISOM, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Positive power supply input, 5 V nominal (4.75 to 5.25 VDC) for TD521D485H-A, with no reverse-polarity protection and absolute maximum of 7 V. |
| 2 | GND | power_in | Power supply input ground. |
| 3 | TXD | input | Data transmit input from the MCU with 5 V UART levels (VIH min 0.7VCC, VIL max 0.3VCC) and an internal 10 kΩ pull-up. |
| 4 | RXD | output | Data receive output to the MCU with 5 V UART levels (VOH min VCC-0.4 V, VOL max 0.4 V at 4 mA). |
| 7 | VO | power_out | Isolated output power positive; leave floating when unused. |
| 8 | B | bidirectional | RS-485 B bus line with built-in pull-up/pull-down resistors and ESD protection. |
| 9 | A | bidirectional | RS-485 A bus line with built-in pull-up/pull-down resistors and ESD protection. |
| 10 | RGND | power_in | Isolated output power ground (bus-side reference); leave floating when unused. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | VISOM |
| Package | DIP-8 |
| Category | IoT/Communication Modules |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range (absolute maximum, TD521D485H-A) | -0.7 | 5 | 7 | V dc | 2 | ||
| Input voltage VCC (TD521D485H-A) | VCC | 4.75 | 5 | 5.25 | VDC | 2 | |
| TXD logic low input voltage | VIL | 0 | V | 2 | |||
| RXD logic low output voltage | VOL | 0.2 | 0.4 | V | IRXD=4mA | 2 | |
| Differential output voltage (A-B) | VOD | 1.5 | V | nominal input voltage, differential load 54Ω | 2 | ||
| Differential output current (A-B) | IOD | 28 | mA | 2 | |||
| Transceiver input impedance | 48 | -7V≤VCM≤+12V | 3 | ||||
| Operating temperature range | -40 | 85 | ℃ | output at full load | 3 | ||
| Storage temperature | -55 | 105 | ℃ | 3 | |||
| Storage humidity | 95 | % | non-condensing | 3 | |||
| Pin soldering temperature, manual soldering | 370 | ℃ | hand soldering, 3~5 s | 2 | |||
| Pin soldering temperature, wave soldering | 265 | ℃ | wave soldering, 5~10 s | 2 | |||
| Data transmit delay | 1000 | ns | 3 | ||||
| Data receive delay | 100 | ns | 3 | ||||
| Isolation voltage | 2.5 | KVDC | test time 1 min, leakage current <5mA, humidity <95% | 3 | |||
| Case temperature rise during operation | 20 | ℃ | 3 |
CAD (Adom-generated)
- Symbol:
TD521D485H-A - Footprint:
Adom_Gen:VISOM_TD521_29384f - 3D model: generated to fit the land (STEP)
- 3D model files:
td521d485h-a-etched.step/td521d485h-a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);td521d485h-a.step/td521d485h-a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: VISOM datasheet (5 pp, sha256
c27581d3a59f8a52, retrieved 2026-11-16, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: VISOM TDx21D485H-A datasheet 2020.10.16 A1.1 p.1. 4.1 底视图 (bottom view): 1 2 3 4 down the left at 2.54; 10 opposite 1, 9 opposite 2, 8 opposite 3, 7 opposite 4, rows 15.24 apart (the 19.50 x 16.50 VISOM body, as ctm1051at). 4.2 建议印刷图 (the top view, mirror of the bottom view; Φ1.0 holes): 1 bottom-left, 2-4 above; 10 right of 1, 9/8/7 above. Numbered CLOCKWISE from the top (mirror of a DIP): with 1-4 down x=0 the 10/9/8/7 row is at x=-15.24. The old land, KiCad DIP-8_W7.62mm, numbered 1-8 at 7.62 rows: pins 7-10 had no pads and the row spacing was wrong. Pad 1.6 (KiCad DIP; not printed), drill 1.0 as printed. Body 19.50 (across rows) x 16.50 x 7.10 (p.3 封装尺寸 19.5016.507.10), centred on the pin field; lead 4.10.