← Commit history
README.mdadded+49@@ -0,0 +1,49 @@+# TD1837++**Techcode Semicon** · DC-DC Converters · ESOP-8++TD1837 from Techcode Semicon, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | output | Switch Node. Output from the internal high-side power MOSFET (250mΩ RDS(on)). Requires an external low-VF Schottky rectifier to ground placed close to the pin to reduce switching spikes. Switch voltage range -0.5V to VIN+0.5V. |+| 2 | EN | input | Enable Input (positive logic). Pulling below the falling threshold (~1.7V) or leaving floating shuts the chip down; pulling above the rising threshold (~1.9V, spec 1.3V min to 2.2V max) enables the chip. Internal ~1MΩ pull-down to GND. |+| 3 | COMP | output | Compensation. Output of the internal GM error amplifier. Connect an external R-C compensation network here to set loop dynamics. Internally clamped between ~0.9V (min) and ~2.0V (max) during operation; do not drive above 2.6V. |+| 4 | FB | input | Feedback. Inverting input to the internal error amplifier. An external resistive divider from VOUT to GND sets the output voltage; the divider is compared to the internal 0.8V reference (VFB = 0.780V to 0.820V). |+| 5 | GND | power_in | Ground. Common return for the device and shared with the exposed thermal pad. Connect as close as possible to the output capacitor while avoiding high-current switch paths. The exposed pad must be tied to the GND plane for optimal thermal performance. |+| 6 | FREQ | input | Switching Frequency Program Input. Connect a resistor RFREQ from this pin to ground to program the oscillator frequency (up to 1MHz). RFREQ(kΩ) = 100000/fs(kHz) − 5. For VIN ≥ 64V, set fsw below 400kHz. |+| 7 | VIN | power_in | Input Supply. Supplies all internal control circuitry, bootstrap regulators, and the high-side power MOSFET. Absolute maximum 80V (operating range 12V to 80V; VIN UVLO ~7.2V rising, ~6.5V falling). A decoupling capacitor to ground must be placed close to this pin. |+| 8 | BST | power_in | Bootstrap. Positive supply for the internal floating high-side MOSFET gate driver. Connect a bypass capacitor (typ. 0.1μF) between BST and SW. Internally regulated to ~5V above SW; BST-to-SW absolute maximum is +5V. |+| EP | GND | power_in | Exposed thermal pad on the bottom of the ESOP-8 package. Electrically tied to GND (pin 5). Solder to a large GND copper area for optimal thermal performance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Techcode Semicon |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 9 |++## Ordering variants++- `TD1837M`+- `TD1837MR`++## CAD (KiCad official)++- Symbol: `TD1837`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Techcode Semicon datasheet](docs/td1837-datasheet.pdf) (None pp, sha256 `664614e8ad9c691d`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/td1837-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "td1837",+ "version": "0.1.0",+ "type": "component",+ "description": "Techcode Semicon DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "td1837"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "td1837.kicad_sym",+ "td1837.kicad_mod",+ "td1837.glb",+ "td1837.step",+ "td1837.lbr",+ "docs/hero.png",+ "docs/td1837-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}