main
Ray Publish 0.2.0 710d7ac
{
  "slug": "td1660",
  "version": "0.2.0",
  "type": "component",
  "description": "Techcode Semicon DC-DC Converters, ESOP-8. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "dc-dc converters",
    "td1660",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "td1660.kicad_sym",
    "td1660.kicad_mod",
    "td1660.glb",
    "td1660.step",
    "td1660.lbr",
    "docs/hero.png",
    "docs/td1660-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "td1660-hero.glb",
    "td1660-hero.overlay.json"
  ],
  "component": {
    "mpn": "TD1660",
    "manufacturer": "Techcode Semicon",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "DC-DC Converters",
    "subcategory": "DC-DC Converters",
    "datasheet": "",
    "parts": {
      "symbol": "td1660.kicad_sym",
      "footprint": "td1660.kicad_mod",
      "model_3d": "td1660-hero.glb",
      "model_3d_plain": "td1660.glb",
      "model_3d_step": "td1660-etched.step",
      "model_3d_step_plain": "td1660.step",
      "lbr": "td1660.lbr"
    },
    "distributor_links": {
      "lcsc": "C2832211"
    },
    "distributor_check": {
      "checked_at": "2026-11-16T22:38:24Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SW",
        "type": "output",
        "description": "Switch node. Output from the internal high-side power MOSFET (RDS(ON) typ 250mΩ). Requires a low-VF Schottky rectifier to ground placed close to the pin to reduce switching spikes. Absolute max: -0.5V to VIN+0.5V."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable input (positive logic). Pull above rising threshold (typ 1.5V, spec 1.3V-2.2V) or leave floating to enable; pull below falling threshold (~1.2V) to shut down. 200mV hysteresis. Absolute max: -0.3V to +5V."
      },
      {
        "number": "3",
        "name": "COMP",
        "type": "output",
        "description": "Compensation node. Output of the internal Gm error amplifier; connect an external series R-C (and optional second cap) to set loop pole/zero. COMP is clamped internally between 0.9V and 2.0V; do not drive above 2.6V."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Feedback input to the error amplifier. Connect a resistive divider from VOUT to GND; the divider node is compared to the internal 0.8V reference (0.780V-0.820V) to set the regulated output voltage (0.8V to 52V)."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return. Also the exposed thermal pad on the ESOP-8 package - connect to the GND plane for optimal thermal performance. Route close to the output capacitor and away from high-current switch paths."
      },
      {
        "number": "6",
        "name": "FREQ",
        "type": "input",
        "description": "Switching-frequency program input. Connect a resistor RFREQ from this pin to GND to set the oscillator frequency, per RFREQ(kΩ) = 100000/fS(kHz) − 5 (e.g. 195kΩ → 500kHz; 150kΩ → ~700kHz). Programmable up to 1MHz."
      },
      {
        "number": "7",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply, 9V to 60V (abs max 60V). Powers the internal control circuitry, bootstrap regulator, and high-side power MOSFET. UVLO rising threshold typ 7.2V (0.5V hysteresis). Place a decoupling capacitor to GND close to this pin."
      },
      {
        "number": "8",
        "name": "BST",
        "type": "power_in",
        "description": "Bootstrap. Positive supply for the internal floating high-side MOSFET driver. Connect a bypass capacitor (typ 0.1μF) between BST and SW; internally regulated to ~5V above SW. BST-to-SW abs max +5V."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad; the maker lists it with pin 5 (\"5  GND, Exposed pad ... Connect exposed pad to GND plane for optimal thermal performance\"). KiCad's SOIC-8-1EP numbers the exposed pad 9."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "",
        "pages": 13,
        "sha256": "67a24a62ca900eb4",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "td1660.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f1718a42c5ea007e8e2dd672ac39a1bb358ee4849bd53c42e21ce83e0e5df7a9",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "td1660-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d62ae695bff9d6623feba89ada6dcca011677414a7a64f1248f030d07831dd91",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}