component
TD1534
Public Made by Adomby adom
Techcode Semicon DC-DC Converters, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTD1534
Techcode Semicon · DC-DC Converters · SOP-8
TD1534 from Techcode Semicon, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback input: an external resistor divider senses the output voltage and regulates it to a feedback threshold of 0.8V. |
| 2 | EN | input | Enable digital input: drive high to turn the regulator on and low to turn it off (datasheet gives a 0.7V low threshold, a 1.3V high threshold, and a 12V maximum pin voltage). |
| 3 | NC | unconnected | Not connected; the datasheet assigns no function to this pin. |
| 4 | VIN | power_in | Supply input operating from 1.0V to 20V DC; bypass VIN to GND with a suitably large capacitor to eliminate input noise. |
| 5 | SW | output | Power switch output (switch node) that supplies power to the output; keep its copper area small to limit coupling into sensitive circuitry. |
| 6 | SW | output | Power switch output (switch node) that supplies power to the output; keep its copper area small to limit coupling into sensitive circuitry. |
| 7 | GND | power_in | Ground pin; route it so it sits outside the Schottky diode to output capacitor ground path to prevent switching current spikes from injecting noise into the IC. |
| 8 | GND | power_in | Ground pin; route it so it sits outside the Schottky diode to output capacitor ground path to prevent switching current spikes from injecting noise into the IC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Techcode Semicon |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 3.6 | 20 | V | 4 | ||
| Operating Junction Temperature | TJ | -40 | 125 | ºC | 4 | ||
| Operating Ambient Temperature | TA | -40 | 85 | ºC | 4 | ||
| Input Voltage | VIN | -0.3 | 20 | V | 4 | ||
| Feedback Pin Voltage | VFB | -0.3 | V | 4 | |||
| Enable Pin Voltage | VEN | -0.3 | 12 | V | 4 | ||
| Switch Pin Voltage | VSW | -0.3 | V | 4 | |||
| Operating Junction Temperature | TJ | 150 | ºC | 4 | |||
| Storage Temperature | TSTG | -65 | 150 | ºC | 4 | ||
| Lead Temperature (Soldering) | TLEAD | 260 | ºC | 10 sec soldering | 4 | ||
| ESD (HBM) | 2000 | V | HBM | 4 | |||
| Input voltage | VIN | 3.6 | 20 | V | 5 | ||
| Shutdown Supply Current | ISTBY | 30 | 90 | uA | VEN=0V | 5 | |
| Supply Current | ICC | 3.6 | 4 | mA | VEN=2V, VFB=1.3V | 5 | |
| Feedback Voltage | VFB | 0.776 | 0.8 | 0.824 | V | VIN = 3.6V to 20V | 5 |
| Feedback Bias Current | IFB | 0.1 | 0.5 | uA | VFB=1.3V | 5 | |
| Switch Current Limit | ILIM | 3 | 4 | A | 5 | ||
| Oscillator Frequency | FOSC | 320 | 380 | 440 | KHz | 5 | |
| EN Pin Threshold | VEN | 0.7 | 1.2 | 1.7 | V | VIN =12V, VFB=0V | 5 |
| EN Pin Input Leakage Current (high) | IH | -0.1 | -1 | uA | VEN=2.5V | 5 | |
| EN Pin Input Leakage Current (low) | IL | -3 | -10 | uA | VEN=0.5V | 5 | |
| Max. Duty Cycle | DMAX | 100 | % | VFB=0V, ISW=0.1A | 5 | ||
| Efficiency | η | 92 | % | VIN=12V, Vout=5V, Iout=2A | 5 | ||
| Thermal Shutdown | TOTSD | 165 | ºC | 5 | |||
| Internal PMOS RDSON | RDSON | 140 | mΩ | VIN =12V, VFB=0V, VEN=12V, Iout=2A | 5 | ||
| Frequency of Current Limit or Short Circuit Protection | FOSC1 | 42 | KHz | VFB=0V | 5 | ||
| Thermal Resistance-Junction to Ambient | RθJA | 85 | ºC/W | 4 | |||
| Thermal Resistance-Junction to Case | RθJC | 45 | ºC/W | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | this is the output (switch) pin, which should not have large areas of copper.) Large areas of copper provide the | 11 |
CAD (KiCad official)
- Symbol:
TD1534 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
td1534-etched.step/td1534-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);td1534.step/td1534.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Techcode Semicon datasheet (16 pp, sha256
3ab0b658819e0fe3, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).