Generated by kicad-footprint-generator · KiCad file format 20260206
TD1507TR
Techcode Semicon · DC-DC Converters · TO-252-5
TD1507TR from Techcode Semicon, in a TO-252-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Input supply voltage. Operating range 3.6V to 45V (absolute max 45V). Connect a bulk input capacitor close to this pin. |
| 2 | Output | output | Switching output from the internal high-side power transistor. Drives the external inductor/catch-diode node of the buck converter. Absolute max -0.3V to Vin+0.3V. |
| 3 | GND | power_in | Device ground return. Also serves as the thermal path via the TO252-5L tab (θJC ≈ 10 °C/W). |
| 4 | FB | input | Output voltage feedback input to the internal error amplifier. Regulated against the 1.235V internal reference; on the fixed 5V version this pin is tied through the internal divider. Feedback bias current is typically 10 nA. |
| 5 | ON/OFF | input | TTL-compatible shutdown input. Regulator is enabled (ON) when this pin is low or left floating (VIL ≤ 1.3V typ), and shuts down (OFF) when driven high (VIH ≥ 1.3V typ, 2.0V min). Standby quiescent current ≈ 80 µA at Vin=36V. Absolute max -0.3V to Vin+0.3V. |
| 6 | TAB | passive | TO-252 tab; net not stated. Figure 2 prints pins 1-5 only; the sheet says "The TO-252 surface mount package tab is designed to be soldered to the copper on a printed circuit board. The copper and the board are the heat sink for this package". KiCad's TO-252-5_TabPin6 numbers the tab 6. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Techcode Semicon |
| Package | TO-252-5 |
| Category | PMIC |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (TD1507 ADJ variant) | Vout | 1.18 | 1.23 | 1.28 | V | 11V≤VIN≤45V, 0.2A≤ILOAD≤3A, VOUT for 9V | 6 |
| Output voltage (TD1507 5V variant) | Vout | 4.75 | 5 | 5.25 | V | 7V≤VIN≤45V, 0.2A≤ILOAD≤3A | 6 |
| Quiescent current | IQ | 5 | 10 | mA | VFB=12V force driver off | 5 | |
| Standby quiescent current | ISTBY | 80 | 250 | uA | ON/OFF=5V, VIN=36V | 5 | |
| Oscillator frequency | FOSC | 127 | 150 | 173 | KHz | 5 | |
| Saturation voltage | VSAT | 1.2 | 1.5 | V | IOUT=3A | 5 | |
| Current limit | ICL | 4.5 | 6.5 | A | Peak Current (VFB=0V) | 5 | |
| Feedback bias current (ADJ only) | Ib | 10 | 100 | nA | Adjustable only, VFB=1.3V | 5 | |
| Output leakage current (Output=0V) | IL | 50 | uA | Output=0V (VFB=12V) | 5 | ||
| Output leakage current (Output=-1V) | IL | 2 | 30 | mA | Output=-1V (VIN=36V) | 5 | |
| ON/OFF pin threshold voltage, low (Regulator ON) | VIL | 1.3 | 0.6 | V | Low (Regulator ON) | 5 | |
| ON/OFF pin threshold voltage, high (Regulator OFF) | VIH | 2 | 1.3 | V | High (Regulator OFF) | 5 | |
| ON/OFF pin input current, high | IH | 5 | 15 | uA | VLOGIC=2.5V (Regulator OFF) | 5 | |
| ON/OFF pin input current, low | IL | 0.02 | 5 | uA | VLOGIC=0.5V (Regulator ON) | 5 | |
| Input voltage | VIN | 3.6 | 45 | V | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | ºC | 4 | ||
| Operating ambient temperature | TA | -40 | 85 | ºC | 4 | ||
| Input voltage | VIN | -0.3 | 45 | V | 4 | ||
| Feedback pin voltage | VFB | -0.3 | V | Upper limit printed as Vin+0.3 | 4 | ||
| ON/OFF pin voltage | VEN | -0.3 | V | Upper limit printed as Vin+0.3 | 4 | ||
| Output pin voltage | VSW | -0.3 | V | Upper limit printed as Vin+0.3 | 4 | ||
| Operating junction temperature (absolute maximum) | TJ | 150 | ºC | 4 | |||
| Storage temperature | TSTG | -65 | 150 | ºC | 4 | ||
| Lead temperature | TLEAD | 260 | ºC | Soldering, 10 sec | 4 | ||
| ESD (HBM) | ESD | 2000 | V | HBM | 4 | ||
| Thermal resistance junction to ambient | RθJA | 50 | ºC / W | Junction to ambient | 4 | ||
| Thermal resistance junction to case | RθJC | 10 | ºC / W | Junction to case | 4 | ||
| Efficiency (TD1507 ADJ variant) | η | 88 | % | VIN=12V,VOUT=9V,ILOAD=3A | 6 | ||
| Efficiency (TD1507 5V variant) | η | 83 | % | VIN=12V, ILOAD=3A | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | this is the output (switch) pin, which should not have large areas of copper.) Large areas of copper provide the | 12 |
CAD (KiCad official)
- Symbol:
TD1507TR - Footprint:
Package_TO_SOT_SMD:TO-252-5_TabPin6 - 3D model: TO-252-5 (KiCad packages3D, STEP)
- 3D model files:
td1507tr-etched.step/td1507tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);td1507tr.step/td1507tr.glbare the bare package body.
Provenance
No distributor stocks TD1507TR yet. This page was built from the datasheet.
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Techcode Semicon datasheet (16 pp, sha256
606abcd595801ad9, retrieved 2026-11-16, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).