component
TD1501HSADJ
Public Made by Adomby adom
Techcode Semicon DC-DC Converters, TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 17d ago |
| viewers | 17d ago |
| package.json | 17d ago |
| page.json | 17d ago |
| README.md | 17d ago |
| td1501hsadj-etched.glb | 17d ago |
| td1501hsadj-etched.step | 17d ago |
| td1501hsadj-hero.glb | 17d ago |
| td1501hsadj-hero.overlay.json | 17d ago |
| td1501hsadj.glb | 17d ago |
| td1501hsadj.kicad_mod | 17d ago |
| td1501hsadj.kicad_sym | 17d ago |
| td1501hsadj.lbr | 17d ago |
| td1501hsadj.step | 17d ago |
TD1501HSADJ
Techcode Semicon · DC-DC Converters · TO-263-5
TD1501HSADJ from Techcode Semicon, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Positive input supply for the switching regulator, which needs a suitable input bypass capacitor to limit voltage transients; the recommended input voltage is 3.6 V to 60 V. |
| 2 | Output | output | Internal switch output that swings between (+VIN - VSAT) and approximately -0.5 V at a duty cycle of about VOUT/VIN, so its PCB copper area should be kept minimal. |
| 3 | GND | power_in | Circuit ground return for the regulator, to be connected to a ground plane together with the input and output capacitors. |
| 4 | FB | input | Feedback input that senses the regulated output voltage through the external R1/R2 divider to close the control loop; in the ADJ version VFB = 1.23 V nominal and must stay within the absolute maximum of -0.3 V to Vin+0.3 V. |
| 5 | ON/OFF | input | Shutdown control where a logic level below about 1.3 V turns the regulator on and a level above 1.3 V (maximum 25 V) shuts it down to about 80 µA; leaving it open or tying it to GND keeps the regulator on. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Techcode Semicon |
| Package | TO-263-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback bias current | Ib | 10 | 100 | nA | Adjustable only, VFB=1.3V | 5 | |
| Quiescent current | IQ | 5 | 10 | mA | VFB=12V force driver off | 5 | |
| Standby quiescent current | ISTBY | 80 | 250 | uA | ON/OFF=5V, VIN=36V | 5 | |
| Oscillator frequency | FOSC | 127 | 150 | 173 | KHz | 5 | |
| Saturation voltage | VSAT | 1.2 | 1.5 | V | IOUT=3A | 5 | |
| Current limit (peak current) | ICL | 4.5 | 6.5 | A | Peak Current (VFB=0V) | 5 | |
| Output leakage current | IL | 50 | uA | Output=0V (VFB=12V) | 5 | ||
| Output leakage current | IL | 2 | 30 | mA | Output=-1V (VIN=36V) | 5 | |
| ON/OFF pin threshold voltage, low (regulator ON) | VIL | 0.6 | V | Low (Regulator ON) | 5 | ||
| ON/OFF pin threshold voltage, high (regulator OFF) | VIH | 2 | V | High (Regulator OFF) | 5 | ||
| ON/OFF pin input current, high (regulator OFF) | IH | 5 | 15 | uA | VLOGIC=2.5V (Regulator OFF) | 5 | |
| ON/OFF pin input current, low (regulator ON) | IL | 0.02 | 5 | uA | VLOGIC=0.5V (Regulator ON) | 5 | |
| Output voltage (ADJ) | Vout | 1.18 | 1.23 | 1.28 | V | 11V≤VIN≤60V, 0.2A≤ILOAD≤3A, VOUT for 9V | 6 |
| Input voltage (absolute maximum) | VIN | -0.3 | 60 | V | 4 | ||
| Feedback pin voltage (absolute maximum) | VFB | -0.3 | V | Printed as Vin+0.3 upper limit | 4 | ||
| ON/OFF pin voltage (absolute maximum) | VEN | -0.3 | 25 | V | 4 | ||
| Output pin voltage (absolute maximum) | VSW | -0.3 | V | Printed as Vin+0.3 upper limit | 4 | ||
| Operating junction temperature (absolute maximum) | TJ | 150 | ºC | 4 | |||
| Storage temperature | TSTG | -65 | 150 | ºC | 4 | ||
| Lead temperature (soldering) | TLEAD | 260 | ºC | 10 sec | 4 | ||
| ESD (HBM) | 4000 | V | HBM | 4 | |||
| Input voltage (recommended) | VIN | 3.6 | 60 | V | 4 | ||
| Operating junction temperature (recommended) | TJ | -40 | 125 | ºC | 4 | ||
| Operating ambient temperature (recommended) | TA | -40 | 85 | ºC | 4 | ||
| Thermal resistance, junction to case | θJC | 3.5 | ºC/W | TO263-5L | 5 | ||
| Thermal resistance, junction to ambient | θJA | 23 | ºC/W | TO263-5L (Note1: copper area approx. 3 in2) | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | this is the output (switch) pin, which should not have large areas of copper.) Large areas of copper provide the | 12 |
CAD (KiCad official)
- Symbol:
TD1501HSADJ - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
td1501hsadj-etched.step/td1501hsadj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);td1501hsadj.step/td1501hsadj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Techcode Semicon datasheet (16 pp, sha256
62781d364bd45725, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).