component
TD1501HS50
Public Made by Adomby adom
Techcode Semicon DC-DC Converters, TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTD1501HS50
Techcode Semicon · DC-DC Converters · TO-263-5
TD1501HS50 from Techcode Semicon, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Input supply voltage (3.6 V to 60 V recommended, absolute max 60 V); needs a suitable input bypass capacitor to minimize voltage transients and supply switching currents. |
| 2 | Output | output | Internal switching output that swings between (+VIN - VSAT) and approximately -0.5 V; keep the connected PCB copper area to a minimum to limit coupling. |
| 3 | GND | power_in | Circuit ground. |
| 4 | FB | input | Output voltage feedback pin that senses the regulated output voltage to complete the feedback loop (absolute max -0.3 V to Vin+0.3 V). |
| 5 | ON/OFF | input | Shutdown control, active low: below about 1.3 V turns the regulator on, above 1.3 V (max 25 V) shuts it down to about 80 uA, and it may be grounded or left open for always-on operation. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Techcode Semicon |
| Package | TO-263-5 |
| Category | Power Management ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (5V) | VOUT | 4.8 | 5 | 5.2 | V | 7V ≤ VIN ≤ 60V, 0.2A ≤ ILOAD ≤ 3A (full range 4.750/5.250) | 6 |
| Input Voltage (abs max) | VIN | -0.3 | 60 | V | 4 | ||
| Feedback Pin Voltage | VFB | -0.3 | V | -0.3 to Vin+0.3 | 4 | ||
| ON/OFF Pin Voltage | VEN | -0.3 | 25 | V | 4 | ||
| Output Pin Voltage | VSW | -0.3 | V | -0.3 to Vin+0.3 | 4 | ||
| Operating Junction Temperature (abs max) | TJ | 150 | ºC | 4 | |||
| Storage Temperature | TSTG | -65 | 150 | ºC | 4 | ||
| Lead Temperature | TLEAD | 260 | ºC | Soldering, 10 sec | 4 | ||
| ESD (HBM) | ESD | 4000 | V | HBM | 4 | ||
| Input Voltage (recommended) | VIN | 3.6 | 60 | V | 4 | ||
| Operating Junction Temperature | TJ | -40 | 125 | ºC | 4 | ||
| Operating Ambient Temperature | TA | -40 | 85 | ºC | 4 | ||
| Thermal Resistance Junction to Ambient | RθJA | 23 | ºC/W | TO263-5L, copper area approx 3 in2 | 5 | ||
| Thermal Resistance Junction to Case | θJC | 3.5 | ºC/W | TO263-5L | 5 | ||
| Quiescent current | IQ | 5 | 10 | mA | VFB=12V force driver off | 5 | |
| Standby quiescent current | ISTBY | 80 | 200 | uA | ON/OFF=5V, VIN=36V (full range 250) | 5 | |
| Oscillator frequency | FOSC | 127 | 150 | 173 | KHz | 5 | |
| Saturation voltage | VSAT | 1.2 | 1.4 | V | IOUT=3A (full range 1.5) | 5 | |
| Current Limit | ICL | 4.5 | 5.5 | A | Peak Current (VFB=0V) (full range max 6.5) | 5 | |
| Output leakage current | IL | 50 | uA | Output=0V (VFB=12V) | 5 | ||
| Output leakage current | IL | 2 | 30 | mA | Output=-1V (VIN=36V) | 5 | |
| ON/OFF threshold voltage low | VIL | 1.3 | 0.6 | V | Low (Regulator ON) | 5 | |
| ON/OFF threshold voltage high | VIH | 1.3 | 2 | V | High (Regulator OFF) | 5 | |
| ON/OFF pin input current high | IH | 5 | 15 | uA | VLOGIC=2.5V (Regulator OFF) | 5 | |
| ON/OFF pin input current low | IL | 0.02 | 5 | uA | VLOGIC=0.5V (Regulator ON) | 5 | |
| Efficiency (5V) | η | 83 | % | VIN=12V, ILOAD=3A | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | this is the output (switch) pin, which should not have large areas of copper.) Large areas of copper provide the | 12 |
CAD (KiCad official)
- Symbol:
TD1501HS50 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
td1501hs50-etched.step/td1501hs50-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);td1501hs50.step/td1501hs50.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Techcode Semicon datasheet (16 pp, sha256
62781d364bd45725, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).