component

TCS40DPR

Public Made by Adom

by adom

TOSHIBA LF Hall Sensor, SOT-23F. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentsensortcs40dpr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

TCS40DPR

TOSHIBA LF · Hall Sensor · SOT-23F

TCS40DPR from TOSHIBA LF, in a SOT-23F. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Positive supply input. Operating range 2.3 V to 5.5 V (absolute max 6.0 V). A 0.47 μF bypass capacitor should be placed near the device.
2 VOUT output CMOS push-pull digital output. Drives low (VOL) when magnetic flux density exceeds B_ON (~3.4 mT typ., either south or north pole) and drives high (VOH) when
3 GND power_in Ground / 0 V reference for the device.

Key specifications

Parameter Value
Manufacturer TOSHIBA LF
Package SOT-23F
Category Sensor
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • TCS40DPR

CAD (KiCad official)

  • Symbol: TCS40DPR
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23F (KiCad packages3D, STEP)
  • 3D model files: tcs40dpr-etched.step / tcs40dpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tcs40dpr.step / tcs40dpr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
tcs40dpr.step 59 KB You want the bare part, or you mark your own boards.
tcs40dpr-etched.step 1.5 MB You want the part with TCS40DPR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 372 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TOSHIBA LF datasheet (7 pp, sha256 07ffd38a576e4513, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF