component
TCS3200D-TR
Public Made by Adomby adom
AMS Ambient Light Sensors, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTCS3200D-TR
AMS · Ambient Light Sensors · SOIC-8
TCS3200D-TR from AMS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S0 | input | Output frequency scaling selection input; S0/S1 combination selects 100%, 20%, 2%, or power-down mode. |
| 2 | S1 | input | Output frequency scaling selection input; S0/S1 combination selects 100%, 20%, 2%, or power-down mode. |
| 3 | OE | input | Output enable input (active low); places output in high-impedance state when OE is high. |
| 4 | GND | power_in | Power supply ground; all voltages are referenced to GND. |
| 5 | VDD | power_in | Supply voltage input; recommended operating range 2.7V to 5.5V. |
| 6 | OUT | output | Output frequency (fo) with 50% duty cycle square wave proportional to light intensity. |
| 7 | S2 | input | Photodiode type selection input; S2/S3 combination selects red, blue, clear, or green photodiode type. |
| 8 | S3 | input | Photodiode type selection input; S2/S3 combination selects red, blue, clear, or green photodiode type. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AMS |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TCS3200D-TR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tcs3200d-tr-etched.step/tcs3200d-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tcs3200d-tr.step/tcs3200d-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: AMS datasheet (26 pp, sha256
0e1f434a4995b6c6, retrieved 2026-09-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).