main
Ray
Publish 0.1.0
e59bab7
TCR3DM105
TOSHIBA · Linear Voltage Regulators (LDO) · DFN-4(1x1)
TCR3DM105 from TOSHIBA, in a DFN-4(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output voltage pin (fixed 1.05 V for TCR3DM105), up to 300 mA, with a 1.0 μF ceramic output capacitor recommended. |
| 2 | GND | power_in | Ground pin; the center electrode should be connected to GND or left open. |
| 3 | CONTROL | input | On/off control input: HIGH (1.0 to 5.5 V) turns the output on, LOW (0 to 0.4 V) or open turns it off, with an internal pull-down to GND. |
| 4 | VIN | power_in | Input supply pin, 1.75 to 5.5 V operating range (absolute maximum 6.0 V), with a 1.0 μF ceramic input capacitor recommended. |
| 5 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TOSHIBA |
| Package | DFN-4(1x1) |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (VOUT<1.8 V) | VOUT | -18 | 18 | mV | IOUT = 50 mA, VOUT <1.8 V | 4 | |
| Input voltage | VIN | 1.75 | 5.5 | V | IOUT = 300 mA | 4 | |
| Line regulation | Reg·line | 1 | 15 | mV | VOUT + 0.5 V ≤ VIN ≤ 5.5 V, IOUT = 1 mA | 4 | |
| Load regulation | Reg·load | 18 | 35 | mV | 1 mA ≤ IOUT ≤ 300 mA | 4 | |
| Stand-by current | IB (OFF) | 0.1 | 1 | μA | VCT = 0 V | 4 | |
| Dropout voltage (1.0 V, 1.05 V) | VDO | 590 | 750 | mV | IOUT = 300 mA, CIN = 1.0 μF, COUT = 1.0 μF, Tj = 25°C | 4 | |
| Control voltage (ON) | VCT (ON) | 1 | 5.5 | V | 4 | ||
| Control voltage (OFF) | VCT (OFF) | 0 | 0.4 | V | 4 | ||
| Quiescent current | IB | 65 | μA | IOUT = 0 mA, VOUT = 1.0 V | 4 | ||
| Temperature coefficient | TCVO | 75 | ppm/°C | -40°C ≤ Topr ≤ 85°C | 4 | ||
| Load transient response | ΔVOUT | 80 | mV | IOUT = 1 mA⇔300 mA, COUT = 1.0 μF (±80 mV) | 4 | ||
| Input voltage (abs max) | VIN | 6 | V | Ta = 25°C | 2 | ||
| Control voltage (abs max) | VCT | -0.3 | 6 | V | Ta = 25°C | 2 | |
| Output current (abs max) | IOUT | 300 | mA | Ta = 25°C | 2 | ||
| Power dissipation | PD | 420 | mW | Ta = 25°C, mounted on board (Note 1) | 2 | ||
| Operating temperature range | Topr | -40 | 85 | °C | Ta = 25°C | 2 | |
| Junction temperature | Tj | 150 | °C | Ta = 25°C | 2 | ||
| Storage temperature range | Tstg | -55 | 150 | °C | Ta = 25°C | 2 |
CAD (KiCad official)
- Symbol:
TCR3DM105 - Footprint:
Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm - 3D model: DFN-4(1x1) (KiCad packages3D, STEP)
- 3D model files:
tcr3dm105-etched.step/tcr3dm105-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tcr3dm105.step/tcr3dm105.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TOSHIBA datasheet (15 pp, sha256
cb6966545f36143a, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TCR3DM105
**TOSHIBA** · Linear Voltage Regulators (LDO) · DFN-4(1x1)
TCR3DM105 from TOSHIBA, in a DFN-4(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output voltage pin (fixed 1.05 V for TCR3DM105), up to 300 mA, with a 1.0 μF ceramic output capacitor recommended. |
| 2 | GND | power_in | Ground pin; the center electrode should be connected to GND or left open. |
| 3 | CONTROL | input | On/off control input: HIGH (1.0 to 5.5 V) turns the output on, LOW (0 to 0.4 V) or open turns it off, with an internal pull-down to GND. |
| 4 | VIN | power_in | Input supply pin, 1.75 to 5.5 V operating range (absolute maximum 6.0 V), with a 1.0 μF ceramic input capacitor recommended. |
| 5 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TOSHIBA |
| Package | DFN-4(1x1) |
| Category | Power Management |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (VOUT<1.8 V) | VOUT | -18 | | 18 | mV | IOUT = 50 mA, VOUT <1.8 V | 4 |
| Input voltage | VIN | 1.75 | | 5.5 | V | IOUT = 300 mA | 4 |
| Line regulation | Reg·line | | 1 | 15 | mV | VOUT + 0.5 V ≤ VIN ≤ 5.5 V, IOUT = 1 mA | 4 |
| Load regulation | Reg·load | | 18 | 35 | mV | 1 mA ≤ IOUT ≤ 300 mA | 4 |
| Stand-by current | IB (OFF) | | 0.1 | 1 | μA | VCT = 0 V | 4 |
| Dropout voltage (1.0 V, 1.05 V) | VDO | | 590 | 750 | mV | IOUT = 300 mA, CIN = 1.0 μF, COUT = 1.0 μF, Tj = 25°C | 4 |
| Control voltage (ON) | VCT (ON) | 1 | | 5.5 | V | | 4 |
| Control voltage (OFF) | VCT (OFF) | 0 | | 0.4 | V | | 4 |
| Quiescent current | IB | | 65 | | μA | IOUT = 0 mA, VOUT = 1.0 V | 4 |
| Temperature coefficient | TCVO | | 75 | | ppm/°C | -40°C ≤ Topr ≤ 85°C | 4 |
| Load transient response | ΔVOUT | | 80 | | mV | IOUT = 1 mA⇔300 mA, COUT = 1.0 μF (±80 mV) | 4 |
| Input voltage (abs max) | VIN | | | 6 | V | Ta = 25°C | 2 |
| Control voltage (abs max) | VCT | -0.3 | | 6 | V | Ta = 25°C | 2 |
| Output current (abs max) | IOUT | | | 300 | mA | Ta = 25°C | 2 |
| Power dissipation | PD | | | 420 | mW | Ta = 25°C, mounted on board (Note 1) | 2 |
| Operating temperature range | Topr | -40 | | 85 | °C | Ta = 25°C | 2 |
| Junction temperature | Tj | | | 150 | °C | Ta = 25°C | 2 |
| Storage temperature range | Tstg | -55 | | 150 | °C | Ta = 25°C | 2 |
## CAD (KiCad official)
- Symbol: `TCR3DM105`
- Footprint: `Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm`
- 3D model: DFN-4(1x1) (KiCad packages3D, STEP)
- 3D model files: `tcr3dm105-etched.step` / `tcr3dm105-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tcr3dm105.step` / `tcr3dm105.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [TOSHIBA datasheet](docs/tcr3dm105-datasheet.pdf) (15 pp, sha256 `cb6966545f36143a`, retrieved 2026-10-23, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tcr3dm105-datasheet.pdf)