main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tcm809menb713: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tcm809menb713-etched.glb tcm809menb713: factory component page (tier=mfr) · Ray
tcm809menb713-etched.step tcm809menb713: factory component page (tier=mfr) · Ray
tcm809menb713-hero.glb tcm809menb713: hero GLB from the etched model (keeps the MPN mark) · Ray
tcm809menb713-hero.overlay.json tcm809menb713: hero GLB from the etched model (keeps the MPN mark) · Ray
tcm809menb713.glb Publish 0.1.0 · Ray
tcm809menb713.kicad_mod Publish 0.1.0 · Ray
tcm809menb713.kicad_sym Publish 0.1.0 · Ray
tcm809menb713.lbr Publish 0.1.0 · Ray
tcm809menb713.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 3 pins · Ray

TCM809MENB713

Microchip Tech · Monitors & Reset Circuits · SOT-23

TCM809MENB713 from Microchip Tech, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 GND power_in Ground terminal of the supervisor, as stated in Section 3.1 (Ground terminal).
2 RESET output Push-pull active-low reset output for the TCM809 (MENB713 variant); it remains low while VDD is below the reset threshold and for 240 ms typical (140 ms minimum) after VDD rises above the threshold.
3 VDD power_in Supply voltage monitored by the device, with nominal options of +2.5 V, +3.0 V, +3.3 V and +5.0 V; the datasheet gives a VDD range of 1.2 V to 5.5 V over -40°C to +125°C.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23
Category Power Management ICs
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reset Active Time Out Period 140 320 560 msec 2
Reset Threshold (TCM8xxM, TA = +25°C) VTH 4.31 4.38 4.45 V TCM8xxM: TA = +25°C 2
Reset Threshold (TCM8xxM, full temperature range) VTH 4.25 4.5 V TA =, 40°C to +125°C 2
RESET Output Voltage Low (TCM809) VOL 0.4 V TCM809L/M/J: VDD = VTH min, ISINK = 3.2 mA 2
RESET Output Voltage Low (TCM809) VOL 0.3 V VDD > 1.0V, ISINK = 50 µA 2
VDD Range VDD 1 5.5 V TA = 0°C to +70°C 2
VDD Range VDD 1.2 5.5 V TA =, 40°C to +125°C 2
Supply Current ICC 12 30 µA TCM8xxL/M/J: VDD < 5.5V 2
Reset Threshold Tempco 30 ppm/°C 2
VDD to Reset Delay 65 µsec VDD = VTH to (VTH, 100 mV) (Note 2) 2
Supply Voltage (VDD to GND) 6 V 2
Input Current, VDD 20 mA 2
Output Current, RESET, RESET 20 mA 2
dV/dt (VDD) 100 V/µsec 2
Operating Temperature Range -40 125 °C 2
Storage Temperature Range -65 150 °C 2
Maximum Junction Temperature TJ 150 °C 2
Power Dissipation 320 mW TA = 70°C; 3-Pin SOT-23B; derate 4 mW/°C above +70°C 2
Temperature Range E (ordering code) -40 85 °C Product ID temperature range E 13

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TCM809MENB713
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.01 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tcm809menb713-etched.step / tcm809menb713-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tcm809menb713.step / tcm809menb713.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (16 pp, sha256 18346c283cd3d95b, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF