main
Ray
Publish 0.1.0
f59cc11
TCM809LVNB713
Microchip Tech · Monitors & Reset Circuits · SOT-23-3
TCM809LVNB713 from Microchip Tech, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground terminal. |
| 2 | RESET | output | Active-low push-pull reset output (TCM809) that stays low while VDD is below the reset threshold and for 140 msec minimum (240 msec typ.) after VDD rises above it, valid down to VDD = 1.0V. |
| 3 | VDD | power_in | Supply voltage input being monitored (nominal +2.5V, +3.0V, +3.3V or +5.0V); absolute maximum 6.0V, operating range 1.2V to 5.5V over -40°C to +125°C. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Range | VDD | 1 | 5.5 | V | TA = 0°C to +70°C | 2 | |
| VDD Range | VDD | 1.2 | 5.5 | V | TA = -40°C to +125°C | 2 | |
| Supply Current | ICC | 12 | 30 | µA | TCM8xxL/M/J: VDD < 5.5V | 2 | |
| Reset Threshold | VTH | 4.56 | 4.63 | 4.7 | V | TCM8xxL: TA = +25°C | 2 |
| Reset Threshold | VTH | 4.5 | 4.75 | V | TA = -40°C to +125°C | 2 | |
| Reset Active Time Out Period | 140 | 320 | 560 | msec | 2 | ||
| RESET Output Voltage Low (TCM809) | VOL | 0.4 | V | TCM809L/M/J: VDD = VTH min, ISINK = 3.2 mA | 2 | ||
| RESET Output Voltage Low (TCM809) | VOL | 0.3 | V | VDD > 1.0V, ISINK = 50 µA | 2 | ||
| RESET Output Voltage High (TCM809) | VOH | 1.5 | V | TCM809L/M/J: VDD > VTH max, ISOURCE = 800 µA; printed as VDD, 1.5 | 2 | ||
| Supply Voltage | VDD | 6 | V | VDD to GND | 2 | ||
| RESET Voltage | RESET | -0.3 | 0.3 | V | -0.3V to (VDD +0.3V); max is VDD + 0.3V | 2 | |
| Input Current, VDD | 20 | mA | 2 | ||||
| Output Current, RESET | 20 | mA | 2 | ||||
| dV/dt (VDD) | dV/dt | 100 | V/µsec | 2 | |||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Power Dissipation 3-Pin SOT-23B | 320 | mW | TA = 70°C, derate 4 mW/°C above +70°C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 2 | |||
| Reset Threshold Tempco | 30 | ppm/°C | 2 | ||||
| VDD to Reset Delay | 65 | µsec | VDD = VTH to (VTH, 100 mV) | 2 |
CAD (KiCad official)
- Symbol:
TCM809LVNB713 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
tcm809lvnb713-etched.step/tcm809lvnb713-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tcm809lvnb713.step/tcm809lvnb713.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (16 pp, sha256
18346c283cd3d95b, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TCM809LVNB713
**Microchip Tech** · Monitors & Reset Circuits · SOT-23-3
TCM809LVNB713 from Microchip Tech, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground terminal. |
| 2 | RESET | output | Active-low push-pull reset output (TCM809) that stays low while VDD is below the reset threshold and for 140 msec minimum (240 msec typ.) after VDD rises above it, valid down to VDD = 1.0V. |
| 3 | VDD | power_in | Supply voltage input being monitored (nominal +2.5V, +3.0V, +3.3V or +5.0V); absolute maximum 6.0V, operating range 1.2V to 5.5V over -40°C to +125°C. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-3 |
| Category | Power Supply Chip |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Range | VDD | 1 | | 5.5 | V | TA = 0°C to +70°C | 2 |
| VDD Range | VDD | 1.2 | | 5.5 | V | TA = -40°C to +125°C | 2 |
| Supply Current | ICC | | 12 | 30 | µA | TCM8xxL/M/J: VDD < 5.5V | 2 |
| Reset Threshold | VTH | 4.56 | 4.63 | 4.7 | V | TCM8xxL: TA = +25°C | 2 |
| Reset Threshold | VTH | 4.5 | | 4.75 | V | TA = -40°C to +125°C | 2 |
| Reset Active Time Out Period | | 140 | 320 | 560 | msec | | 2 |
| RESET Output Voltage Low (TCM809) | VOL | | | 0.4 | V | TCM809L/M/J: VDD = VTH min, ISINK = 3.2 mA | 2 |
| RESET Output Voltage Low (TCM809) | VOL | | | 0.3 | V | VDD > 1.0V, ISINK = 50 µA | 2 |
| RESET Output Voltage High (TCM809) | VOH | 1.5 | | | V | TCM809L/M/J: VDD > VTH max, ISOURCE = 800 µA; printed as VDD, 1.5 | 2 |
| Supply Voltage | VDD | | | 6 | V | VDD to GND | 2 |
| RESET Voltage | RESET | -0.3 | | 0.3 | V | -0.3V to (VDD +0.3V); max is VDD + 0.3V | 2 |
| Input Current, VDD | | | | 20 | mA | | 2 |
| Output Current, RESET | | | | 20 | mA | | 2 |
| dV/dt (VDD) | dV/dt | | | 100 | V/µsec | | 2 |
| Operating Temperature Range | | -40 | | 125 | °C | | 2 |
| Power Dissipation 3-Pin SOT-23B | | | | 320 | mW | TA = 70°C, derate 4 mW/°C above +70°C | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 2 |
| Reset Threshold Tempco | | | 30 | | ppm/°C | | 2 |
| VDD to Reset Delay | | | 65 | | µsec | VDD = VTH to (VTH, 100 mV) | 2 |
## CAD (KiCad official)
- Symbol: `TCM809LVNB713`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files: `tcm809lvnb713-etched.step` / `tcm809lvnb713-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tcm809lvnb713.step` / `tcm809lvnb713.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/tcm809lvnb713-datasheet.pdf) (16 pp, sha256 `18346c283cd3d95b`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tcm809lvnb713-datasheet.pdf)