Generated by kicad-footprint-generator · KiCad file format 20260206
TCDT1124
Vishay Intertech · Transistor Output Optocoupler · DIP-6
TCDT1124 from Vishay Intertech, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A | passive | Anode of the gallium arsenide infrared emitting diode; absolute maximum forward current is 60 mA and reverse voltage is 5 V. |
| 2 | C | passive | Cathode of the infrared emitting diode, forming the input return path for the LED drive current. |
| 3 | NC | unconnected | Marked NC (not connected) on the pin diagram. |
| 4 | E | passive | Emitter of the phototransistor output; the datasheet rates emitter-collector voltage at 7 V (VECO). |
| 5 | C | passive | Collector of the phototransistor output; absolute maximum collector current is 50 mA and collector-emitter voltage is 70 V (VCEO). |
| 6 | NC | unconnected | Marked NC (not connected) on the pin diagram. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | DIP-6 |
| Category | Optocoupler |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| CTR (current transfer ratio), TCDT1124 group | CTR | 160 | 320 | % | VCE = 5 V, IF = 10 mA | 3 | |
| CTR (current transfer ratio), TCDT1124 group | CTR | 60 | % | VCE = 5 V, IF = 1 mA | 3 | ||
| Reverse voltage | VR | 5 | V | 2 | |||
| Forward current | IF | 60 | mA | 2 | |||
| Forward surge current | IFSM | 3 | A | tp ≤ 10 μs | 2 | ||
| Input power dissipation | Pdiss | 100 | mW | 2 | |||
| Input junction temperature | Tj | 125 | °C | 2 | |||
| Collector emitter voltage | VCEO | 70 | V | 2 | |||
| Emitter collector voltage | VECO | 7 | V | 2 | |||
| Collector current | IC | 50 | mA | 2 | |||
| Collector peak current | ICM | 100 | mA | tp/T = 0.5, tp ≤ 10 ms | 2 | ||
| Output power dissipation | Pdiss | 150 | mW | 2 | |||
| Output junction temperature | Tj | 125 | °C | 2 | |||
| Isolation test voltage (RMS) | VISO | 5000 | VRMS | t = 1 s | 2 | ||
| Total power dissipation | Ptot | 250 | mW | 2 | |||
| Ambient temperature range | Tamb | -55 | 100 | °C | 2 | ||
| Storage temperature range | Tstg | -55 | 125 | °C | 2 | ||
| Soldering temperature | Tsld | 260 | °C | 2 mm from case, t ≤ 10 s | 2 | ||
| Forward voltage | VF | 1.25 | 1.6 | V | IF = 50 mA | 2 | |
| Junction capacitance | Cj | 50 | pF | VR = 0 V, f = 1 MHz | 2 | ||
| Collector base voltage | VCBO | 90 | V | IC = 100 μA | 2 | ||
| Collector emitter voltage | VCEO | 90 | V | IC = 1 mA | 2 | ||
| Emitter collector voltage | VECO | 7 | V | IE = 100 μA | 2 | ||
| Collector emitter cut-off current | ICEO | 150 | nA | VCE = 20 V, IF = 0 A | 2 | ||
| Collector emitter saturation voltage | VCEsat | 0.3 | V | IF = 10 mA, IC = 1 mA | 2 | ||
| Cut-off frequency | fc | 110 | kHz | VCE = 5 V, IF = 10 mA, RL = 100 Ω | 2 | ||
| Coupling capacitance | Ck | 0.3 | pF | f = 1 MHz | 2 | ||
| Safety forward current | IF | 130 | mA | Maximum safety rating (DIN EN 60747-5-5) | 3 | ||
| Safety power dissipation | Pdiss | 265 | mW | Maximum safety rating (DIN EN 60747-5-5) | 3 | ||
| Rated impulse voltage | VIOTM | 6 | kV | Maximum safety rating | 3 | ||
| Safety temperature | Tsi | 150 | °C | Maximum safety rating | 3 | ||
| Partial discharge test voltage (routine test) | Vpd | 1.6 | kV | 100 %, ttest = 1 s | 3 | ||
| Partial discharge test voltage (lot test, sample) | VIOTM | 6 | kV | tTr = 60 s, ttest = 10 s | 3 | ||
| Partial discharge test voltage (lot test, sample) | Vpd | 1.3 | kV | tTr = 60 s, ttest = 10 s | 3 | ||
| Delay time | tD | 2 | μs | VS = 5 V, RL = 100 Ω (see figure 3) | 4 | ||
| Rise time | tr | 4 | μs | VS = 5 V, RL = 100 Ω (see figure 3) | 4 | ||
| Storage time | ts | 0.3 | μs | VS = 5 V, RL = 100 Ω (see figure 3) | 4 | ||
| Fall time | tf | 4.7 | μs | VS = 5 V, RL = 100 Ω (see figure 3) | 4 | ||
| Turn-on time | ton | 6 | μs | VS = 5 V, RL = 100 Ω (see figure 3) | 5 | ||
| Turn-off time | toff | 5 | μs | VS = 5 V, RL = 100 Ω (see figure 3) | 5 | ||
| Turn-on time | ton | 20 | μs | VS = 5 V, RL = 1 kΩ (see figure 4) | 5 | ||
| Turn-off time | toff | 50 | μs | VS = 5 V, RL = 1 kΩ (see figure 4) | 5 |
CAD (KiCad official)
- Symbol:
TCDT1124 - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 4.5 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tcdt1124-etched.step/tcdt1124-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tcdt1124.step/tcdt1124.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (10 pp, sha256
e6d539ad8099d9e2, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).