component
TCAN1044ADRQ1
Public Made by Adomby adom
Texas Instruments CAN ICs, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTCAN1044ADRQ1
Texas Instruments · CAN ICs · SOIC-8
TCAN1044ADRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TXD | input | CAN transmit data input from the microcontroller. Integrated pull-up to VCC. A low logic level drives the bus to the dominant state; a high logic level (or floating) results in the recessive state. |
| 2 | GND | power_in | Ground reference for the device. All voltage measurements are referenced to this terminal. |
| 3 | VCC | power_in | 5-V supply voltage input. Recommended operating range is 4.5 V to 5.5 V. Undervoltage detection nominal 4.2 V rising / 4 V falling. |
| 4 | RXD | output | CAN receive data output to the microcontroller. Tri-stated when device is powered off. Drive strength ±2 mA (devices without VIO). |
| 5 | NC | unconnected | Not internally connected on the TCAN1044A-Q1 (this MPN, non-'V' suffix). Leave floating or tie to any convenient net. |
| 6 | CANL | bidirectional | Low-level CAN bus input/output line. Driven low in the dominant state; biased to approximately VCC/2 in the recessive state. Bus fault protection to ±58 V. |
| 7 | CANH | bidirectional | High-level CAN bus input/output line. Driven high in the dominant state; biased to approximately VCC/2 in the recessive state. Bus fault protection to ±58 V. |
| 8 | STB | input | Standby mode control input. Integrated pull-up. Low = Normal mode (transceiver active); High = Low-power Standby mode with remote wake capability per ISO 11898-2:2016 WUP. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Comm/UART |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
TCAN1044ADRQ1TCAN1044ADRQ1DDFRTCAN1044ADRQ1DDFRQ1TCAN1044ADRQ1DRBRTCAN1044ADRQ1DRBRQ1
CAD (KiCad official)
- Symbol:
TCAN1044ADRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tcan1044adrq1-etched.step/tcan1044adrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tcan1044adrq1.step/tcan1044adrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
556a4b8df4de4965, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).