Generated by kicad-footprint-generator · KiCad file format 20260206
TCAL9539RTWR
Texas Instruments · I/O Expanders · WQFN-24-EP(4x4)
TCAL9539RTWR from Texas Instruments, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P00 | bidirectional | P-port input/output (push-pull design structure); configured as an input at power on. |
| 2 | P01 | bidirectional | P-port input/output (push-pull design structure); configured as an input at power on. |
| 3 | P02 | bidirectional | P-port input/output (push-pull design structure); configured as an input at power on. |
| 4 | P03 | bidirectional | P-port input/output (push-pull design structure); configured as an input at power on. |
| 5 | P04 | bidirectional | P-port input/output (push-pull design structure); configured as an input at power on. |
| 6 | P05 | bidirectional | P-port input/output (push-pull design structure); configured as an input at power on. |
| 7 | P06 | bidirectional | P-port input/output (push-pull design structure); configured as an input at power on. |
| 8 | P07 | bidirectional | P-port input/output (push-pull design structure); configured as an input at power on. |
| 9 | GND | power_in | Ground. |
| 10 | P10 | bidirectional | P-port input/output (push-pull design structure); configured as an input at power on. |
| 11 | P11 | bidirectional | P-port input/output (push-pull design structure); configured as an input at power on. |
| 12 | P12 | bidirectional | P-port input/output (push-pull design structure); configured as an input at power on. |
| 13 | P13 | bidirectional | P-port input/output (push-pull design structure); configured as an input at power on. |
| 14 | P14 | bidirectional | P-port input/output (push-pull design structure); configured as an input at power on. |
| 15 | P15 | bidirectional | P-port input/output (push-pull design structure); configured as an input at power on. |
| 16 | P16 | bidirectional | P-port input/output (push-pull design structure); configured as an input at power on. |
| 17 | P17 | bidirectional | P-port input/output (push-pull design structure); configured as an input at power on. |
| 18 | A0 | input | Address input; connect directly to VCC or ground. |
| 19 | SCL | input | Serial clock bus; connect to VCC through a pull-up resistor. |
| 20 | SDA | bidirectional | Serial data bus; connect to VCC through a pull-up resistor. |
| 21 | VCC | power_in | Supply voltage, 1.08 V to 3.6 V recommended operating range. |
| 22 | INT | output | Interrupt output; connect to VCC through a pull-up resistor. |
| 23 | A1 | input | Address input; connect directly to VCC or ground. |
| 24 | RESET | input | Active-low reset input; connect to VCC through a pull-up resistor if no active connection is used. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-24-EP(4x4) |
| Category | Interface |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 1.08 | 3.6 | V | 4 | ||
| High-level input voltage | VIH | 3.6 | V | All Pins; min 0.7 * VCC | 4 | ||
| Low-level input voltage | VIL | -0.5 | V | All Pins; max 0.3 * VCC | 4 | ||
| High-level output current | IOH | -10 | mA | P00-P17 | 4 | ||
| Low-level output current | IOL | 25 | mA | P00-P17 | 4 | ||
| Ambient temperature | TA | -40 | 125 | °C | 4 | ||
| Junction temperature | TJ | 125 | °C | 4 | |||
| Supply voltage | VCC | -0.5 | 4 | V | 4 | ||
| Input voltage | VI | -0.5 | 4 | V | 4 | ||
| Output voltage | VO | -0.5 | 4 | V | 4 | ||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 | 4 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 | 4 | |
| Input-output clamp current | IIOK | -20 | 20 | mA | VO < 0 or VO > VCC | 4 | |
| Continuous output low current | IOL | 50 | mA | VO = 0 to VCC | 4 | ||
| Continuous output high current | IOH | -50 | mA | VO = 0 to VCC | 4 | ||
| Continuous current through GND | ICC | -200 | mA | 4 | |||
| Continuous current through VCC | ICC | 160 | mA | 4 | |||
| Junction temperature | TJ | 130 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 47.1 | °C/W | RTW (WQFN) 24 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 41.2 | °C/W | RTW (WQFN) | 5 | ||
| Junction-to-board thermal resistance | RθJB | 26.6 | °C/W | RTW (WQFN) | 5 | ||
| Junction-to-top characterization parameter | ΨJT | 2.2 | °C/W | RTW (WQFN) | 5 | ||
| Junction-to-board characterization parameter | ΨJB | 26.5 | °C/W | RTW (WQFN) | 5 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 15.8 | °C/W | RTW (WQFN) | 5 | ||
| Input diode clamp voltage | VIK | -1.2 | V | II = -18 mA, VCC 1.08 V to 3.6 V | 5 | ||
| Power-on reset voltage, VCC rising | VPORR | 0.85 | 1 | V | VI = VCC or GND, IO = 0 | 5 | |
| Power-on reset voltage, VCC falling | VPORF | 0.6 | 0.75 | V | VI = VCC or GND, IO = 0 | 5 | |
| P-port high-level output voltage | VOH | 0.8 | V | IOH = -8 mA; CCX.X = 11b, VCC = 1.08 V | 5 | ||
| P-port high-level output voltage | VOH | 2.8 | V | IOH = -8 mA; CCX.X = 11b, VCC = 3 V | 5 | ||
| Low-level output voltage P ports | VOL | 0.2 | V | IOL = 8 mA; CCX.X = 11b, VCC = 1.08 V | 5 | ||
| Low-level output voltage P ports | VOL | 0.1 | V | IOL = 8 mA; CCX.X = 11b, VCC = 3.0 V | 5 | ||
| Low-level output current SDA | IOL | 20 | mA | VOL = 0.4 V, VCC 1.08 V to 3.6 V | 5 | ||
| Low-level output current INT | IOL | 4 | mA | VOL = 0.4 V, VCC 1.08 V to 3.6 V | 5 | ||
| Input leakage current P ports | II | -1 | 1 | µA | VI = VCC or GND, VCC 1.08 V to 3.6 V | 5 | |
| Input leakage current SCL, SDA, RESET | II | -1 | 1 | µA | VI = VCC or GND, VCC 1.08 V to 3.6 V | 5 | |
| Input leakage current A0, A1 | II | -1 | 1 | µA | VI = VCC or GND, VCC 1.08 V to 3.6 V | 5 | |
| Quiescent current operating mode 400 kHz | ICC | 11 | 15 | µA | fSCL = 400 kHz, I/O = inputs, VCC = 3.6 V | 6 | |
| Quiescent current standby mode | ICC | 1 | 2.5 | µA | fSCL = 0 kHz, IO = 0, -40 °C < TA ≤ 85 °C, VCC = 3.6 V | 6 | |
| Quiescent current standby mode | ICC | 7 | µA | fSCL = 0 kHz, IO = 0, 85 °C < TA ≤ 125 °C, VCC = 3.6 V | 6 | ||
| Internal pull-up resistance P port | Rpu(int) | 70 | 100 | 140 | kΩ | P port | 6 |
| Input pin capacitance SCL | CI | 2.5 | 3 | pF | VI = VCC or GND, VCC 1.08 V to 3.6 V | 6 | |
| Input-output pin capacitance SDA | CIO | 6 | 7 | pF | VIO = VCC or GND, VCC 1.08 V to 3.6 V | 6 | |
| Input-output pin capacitance P port | CIO | 6 | 7 | pF | VIO = VCC or GND, VCC 1.08 V to 3.6 V | 6 | |
| Reset pulse duration | tw | 80 | ns | 6 | |||
| Reset recovery time | tREC | 0 | ns | 6 | |||
| Time to reset | tRESET | 400 | ns | 6 | |||
| Minimum pulse width on P-Port that causes an interrupt | tPH | 30 | ns | 6 | |||
| I2C clock frequency, Fast Mode Plus | fscl | 0 | 1000 | kHz | I2C Bus - Fast Mode Plus | 7 | |
| I2C clock frequency, Fast Mode | fscl | 0 | 400 | kHz | I2C Bus - Fast Mode | 7 | |
| I2C clock frequency, Standard Mode | fscl | 0 | 100 | kHz | I2C Bus - Standard Mode | 6 | |
| Interrupt valid time | tiv | 1 | µs | P port to INT | 8 | ||
| Interrupt reset delay time | tir | 1 | µs | SCL to INT | 8 | ||
| Output data valid time | tpv | 400 | ns | SCL to P port | 8 | ||
| Input data setup time | tps | 0 | ns | P port to SCL | 8 | ||
| Input data hold time | tph | 300 | ns | P port to SCL | 8 |
CAD (KiCad official)
- Symbol:
TCAL9539RTWR - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
tcal9539rtwr-etched.step/tcal9539rtwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tcal9539rtwr.step/tcal9539rtwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (49 pp, sha256
117b1731492b2805, retrieved 2026-10-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).