component
TCA9800DGKR
Public Made by Adomby adom
Texas Instruments Translators, Level Shifters, VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTCA9800DGKR
Texas Instruments · Translators, Level Shifters · VSSOP-8-0.65mm
TCA9800DGKR from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCCA | power_in | A-side supply voltage within range 0.8 V to 3.6 V |
| 2 | SCLA | bidirectional | Serial clock bus, A-side; connect to VCCA through a pull-up resistor, even if unused |
| 3 | SDAA | bidirectional | Serial data bus, A-side; connect to VCCA through a pull-up resistor, even if unused |
| 4 | GND | power_in | Ground reference |
| 5 | EN | input | Active-high repeater enable input, referenced to VCCA |
| 6 | SDAB | bidirectional | Serial data bus, B-side; do NOT connect to VCCB through a pull-up resistor for proper operation |
| 7 | SCLB | bidirectional | Serial clock bus, B-side; do NOT connect to VCCB through a pull-up resistor for proper operation |
| 8 | VCCB | power_in | B-side and device supply voltage within range 1.65 V to 3.6 V |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Logic |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TCA9800DGKR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
tca9800dgkr-etched.step/tca9800dgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tca9800dgkr.step/tca9800dgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
336adb7ddf3dd5e9, retrieved 2026-09-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).