main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tca9617adgkr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tca9617adgkr: viewers · Ray
package.json tca9617adgkr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tca9617adgkr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tca9617adgkr · Ray
tca9617adgkr-etched.fit.json tca9617adgkr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tca9617adgkr-etched.glb tca9617adgkr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tca9617adgkr-etched.step tca9617adgkr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tca9617adgkr.glb Publish 0.1.0 · Ray
tca9617adgkr.kicad_mod Publish 0.1.0 · Ray
tca9617adgkr.kicad_sym Publish 0.1.0 · Ray
tca9617adgkr.lbr Publish 0.1.0 · Ray
tca9617adgkr.step Publish 0.1.0 · Ray

TCA9617ADGKR

Texas Instruments · Signal Switches, Multiplexers, Decoders · VSSOP-8-0.65mm

TCA9617ADGKR from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCCA power_in A-side supply voltage input, operating range 0.8V to 5.5V.
2 SCLA bidirectional Open-drain I2C SCL line on A side; requires external pull-up resistor to VCCA.
3 SDAA bidirectional Open-drain I2C SDA line on A side; requires external pull-up resistor to VCCA.
4 GND power_in Supply ground and common reference voltage.
5 EN input Active-high repeater enable input with internal weak pull-up resistor to VCCB; must change state only during bus idle.
6 SDAB bidirectional Open-drain I2C SDA line on B side; requires external pull-up resistor to VCCB.
7 SCLB bidirectional Open-drain I2C SCL line on B side; requires external pull-up resistor to VCCB.
8 VCCB power_in B-side logic supply and device operating voltage, range 2.2V to 5.5V; must power up before VCCA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8-0.65mm
Category Logic
Pins 8

CAD (KiCad official)

  • Symbol: TCA9617ADGKR
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
  • 3D model files: tca9617adgkr-etched.step / tca9617adgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tca9617adgkr.step / tca9617adgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (26 pp, sha256 853f85b664209e65, retrieved 2026-09-22, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF