main
Ray
Publish 0.1.0
b8b324e
TCA9548AMRGER
Texas Instruments · Interface - Specialized · VQFN-24(4x4)
TCA9548AMRGER from Texas Instruments, in a VQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD0 | bidirectional | Serial data 0. Connect to VDPU0 through a pull-up resistor. |
| 2 | SC0 | bidirectional | Serial clock 0. Connect to VDPU0 through a pull-up resistor. |
| 3 | SD1 | bidirectional | Serial data 1. Connect to VDPU1 through a pull-up resistor. |
| 4 | SC1 | bidirectional | Serial clock 1. Connect to VDPU1 through a pull-up resistor. |
| 5 | SD2 | bidirectional | Serial data 2. Connect to VDPU2 through a pull-up resistor. |
| 6 | SC2 | bidirectional | Serial clock 2. Connect to VDPU2 through a pull-up resistor. |
| 7 | SD3 | bidirectional | Serial data 3. Connect to VDPU3 through a pull-up resistor. |
| 8 | SC3 | bidirectional | Serial clock 3. Connect to VDPU3 through a pull-up resistor. |
| 9 | GND | power_in | Ground. |
| 10 | SD4 | bidirectional | Serial data 4. Connect to VDPU4 through a pull-up resistor. |
| 11 | SC4 | bidirectional | Serial clock 4. Connect to VDPU4 through a pull-up resistor. |
| 12 | SD5 | bidirectional | Serial data 5. Connect to VDPU5 through a pull-up resistor. |
| 13 | SC5 | bidirectional | Serial clock 5. Connect to VDPU5 through a pull-up resistor. |
| 14 | SD6 | bidirectional | Serial data 6. Connect to VDPU6 through a pull-up resistor. |
| 15 | SC6 | bidirectional | Serial clock 6. Connect to VDPU6 through a pull-up resistor. |
| 16 | SD7 | bidirectional | Serial data 7. Connect to VDPU7 through a pull-up resistor. |
| 17 | SC7 | bidirectional | Serial clock 7. Connect to VDPU7 through a pull-up resistor. |
| 18 | A2 | input | Address input 2. Connect directly to VCC or ground. |
| 19 | SCL | bidirectional | Serial clock bus. Connect to VDPUM through a pull-up resistor. |
| 20 | SDA | bidirectional | Serial data bus. Connect to VDPUM through a pull-up resistor. |
| 21 | VCC | power_in | Power supply voltage; recommended range is 1.65 V to 5.5 V for −40 °C ≤ TA ≤ 85 °C, and 1.65 V to 3.6 V for 85 °C < TA ≤ 125 °C. |
| 22 | A0 | input | Address input 0. Connect directly to VCC or ground. |
| 23 | A1 | input | Address input 1. Connect directly to VCC or ground. |
| 24 | RESET | input | Active-low reset input. Connect to VCC or VDPUM through a pull-up resistor, if not used. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-24(4x4) |
| Category | Interface |
| Pins | 25 |
CAD (KiCad official)
- Symbol:
TCA9548AMRGER - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: VQFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files:
tca9548amrger-etched.step/tca9548amrger-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tca9548amrger.step/tca9548amrger.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
d9c1ac2608be5328, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TCA9548AMRGER
**Texas Instruments** · Interface - Specialized · VQFN-24(4x4)
TCA9548AMRGER from Texas Instruments, in a VQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD0 | bidirectional | Serial data 0. Connect to VDPU0 through a pull-up resistor. |
| 2 | SC0 | bidirectional | Serial clock 0. Connect to VDPU0 through a pull-up resistor. |
| 3 | SD1 | bidirectional | Serial data 1. Connect to VDPU1 through a pull-up resistor. |
| 4 | SC1 | bidirectional | Serial clock 1. Connect to VDPU1 through a pull-up resistor. |
| 5 | SD2 | bidirectional | Serial data 2. Connect to VDPU2 through a pull-up resistor. |
| 6 | SC2 | bidirectional | Serial clock 2. Connect to VDPU2 through a pull-up resistor. |
| 7 | SD3 | bidirectional | Serial data 3. Connect to VDPU3 through a pull-up resistor. |
| 8 | SC3 | bidirectional | Serial clock 3. Connect to VDPU3 through a pull-up resistor. |
| 9 | GND | power_in | Ground. |
| 10 | SD4 | bidirectional | Serial data 4. Connect to VDPU4 through a pull-up resistor. |
| 11 | SC4 | bidirectional | Serial clock 4. Connect to VDPU4 through a pull-up resistor. |
| 12 | SD5 | bidirectional | Serial data 5. Connect to VDPU5 through a pull-up resistor. |
| 13 | SC5 | bidirectional | Serial clock 5. Connect to VDPU5 through a pull-up resistor. |
| 14 | SD6 | bidirectional | Serial data 6. Connect to VDPU6 through a pull-up resistor. |
| 15 | SC6 | bidirectional | Serial clock 6. Connect to VDPU6 through a pull-up resistor. |
| 16 | SD7 | bidirectional | Serial data 7. Connect to VDPU7 through a pull-up resistor. |
| 17 | SC7 | bidirectional | Serial clock 7. Connect to VDPU7 through a pull-up resistor. |
| 18 | A2 | input | Address input 2. Connect directly to VCC or ground. |
| 19 | SCL | bidirectional | Serial clock bus. Connect to VDPUM through a pull-up resistor. |
| 20 | SDA | bidirectional | Serial data bus. Connect to VDPUM through a pull-up resistor. |
| 21 | VCC | power_in | Power supply voltage; recommended range is 1.65 V to 5.5 V for −40 °C ≤ TA ≤ 85 °C, and 1.65 V to 3.6 V for 85 °C < TA ≤ 125 °C. |
| 22 | A0 | input | Address input 0. Connect directly to VCC or ground. |
| 23 | A1 | input | Address input 1. Connect directly to VCC or ground. |
| 24 | RESET | input | Active-low reset input. Connect to VCC or VDPUM through a pull-up resistor, if not used. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-24(4x4) |
| Category | Interface |
| Pins | 25 |
## CAD (KiCad official)
- Symbol: `TCA9548AMRGER`
- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`
- 3D model: VQFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files: `tca9548amrger-etched.step` / `tca9548amrger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tca9548amrger.step` / `tca9548amrger.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tca9548a) (43 pp, sha256 `d9c1ac2608be5328`, retrieved 2026-10-11, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tca9548amrger-datasheet.pdf)