component
TCA9535RTWR
Public Made by Adomby adom
Texas Instruments I/O Expanders, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
tca9535rtwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
440ddb2
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310
{
"schema_version": 1,
"type": "component",
"slug": "tca9535rtwr",
"title": "TCA9535RTWR",
"brief": "Texas Instruments I/O Expanders, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"interface",
"tca9535rtwr",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "TCA9535RTWR",
"manufacturer": "Texas Instruments",
"package": "WQFN-24-EP(4x4)",
"pin_count": 25,
"category": "Interface",
"subcategory": "I/O Expanders",
"datasheet": "https://www.ti.com/cn/lit/gpn/tca9535",
"parts": {
"symbol": "tca9535rtwr.kicad_sym",
"footprint": "tca9535rtwr.kicad_mod",
"model_3d": "tca9535rtwr-etched.glb",
"model_3d_plain": "tca9535rtwr.glb",
"model_3d_step": "tca9535rtwr-etched.step",
"model_3d_step_plain": "tca9535rtwr.step",
"lbr": "tca9535rtwr.lbr"
},
"distributor_links": {
"lcsc": "C129354"
},
"pins": [
{
"number": "1",
"name": "P00",
"type": "bidirectional",
"description": "I/O port 0, bit 0; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on."
},
{
"number": "2",
"name": "P01",
"type": "bidirectional",
"description": "I/O port 0, bit 1; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on."
},
{
"number": "3",
"name": "P02",
"type": "bidirectional",
"description": "I/O port 0, bit 2; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on."
},
{
"number": "4",
"name": "P03",
"type": "bidirectional",
"description": "I/O port 0, bit 3; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on."
},
{
"number": "5",
"name": "P04",
"type": "bidirectional",
"description": "I/O port 0, bit 4; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on."
},
{
"number": "6",
"name": "P05",
"type": "bidirectional",
"description": "I/O port 0, bit 5; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on."
},
{
"number": "7",
"name": "P06",
"type": "bidirectional",
"description": "I/O port 0, bit 6; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on."
},
{
"number": "8",
"name": "P07",
"type": "bidirectional",
"description": "I/O port 0, bit 7; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on."
},
{
"number": "9",
"name": "GND",
"type": "power_in",
"description": "Ground reference."
},
{
"number": "10",
"name": "P10",
"type": "bidirectional",
"description": "I/O port 1, bit 0; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on."
},
{
"number": "11",
"name": "P11",
"type": "bidirectional",
"description": "I/O port 1, bit 1; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on."
},
{
"number": "12",
"name": "P12",
"type": "bidirectional",
"description": "I/O port 1, bit 2; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on."
},
{
"number": "13",
"name": "P13",
"type": "bidirectional",
"description": "I/O port 1, bit 3; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on."
},
{
"number": "14",
"name": "P14",
"type": "bidirectional",
"description": "I/O port 1, bit 4; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on."
},
{
"number": "15",
"name": "P15",
"type": "bidirectional",
"description": "I/O port 1, bit 5; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on."
},
{
"number": "16",
"name": "P16",
"type": "bidirectional",
"description": "I/O port 1, bit 6; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on."
},
{
"number": "17",
"name": "P17",
"type": "bidirectional",
"description": "I/O port 1, bit 7; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on."
},
{
"number": "18",
"name": "A0",
"type": "input",
"description": "Address input 0; connect directly to VCC or GND to program I2C device address; must not be left floating; used with A1 and A2 to select one of eight addresses."
},
{
"number": "19",
"name": "SCL",
"type": "input",
"description": "I2C/SMBus serial clock input; connect to VCC through pull-up resistor; supports up to 400 kHz fast-mode operation."
},
{
"number": "20",
"name": "SDA",
"type": "input",
"description": "I2C/SMBus serial data input; connect to VCC through pull-up resistor; open-drain design allows device to drive and release bus; supports up to 400 kHz fast-mode."
},
{
"number": "21",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage input; supports 1.65 V to 5.5 V operating range."
},
{
"number": "22",
"name": "INT",
"type": "tri_state",
"description": "Open-drain interrupt output, active-low when any input state differs from Input Port register; requires external pull-up resistor to VCC (typically 10 kΩ)."
},
{
"number": "23",
"name": "A1",
"type": "input",
"description": "Address input 1; connect directly to VCC or GND to program I2C device address; must not be left floating; used with A0 and A2 to select one of eight addresses."
},
{
"number": "24",
"name": "A2",
"type": "input",
"description": "Address input 2; connect directly to VCC or GND to program I2C device address; must not be left floating; used with A0 and A1 to select one of eight addresses."
},
{
"number": "25",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-4-6",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Exposed thermal pad (EP/center pad): Package includes an exposed thermal pad; datasheet states it sh; SDA pin classification: Datasheet lists SDA as 'Input' type in Table 5-1, but SDA is used bidirectio",
"exposed pad 25 added from the footprint"
],
"pages_sent": 48,
"cost_usd": 0.4307,
"at": "2026-09-18T01:20:06"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tca9535",
"pages": 48,
"sha256": "ccd86bad1cdf933f",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 25,
"described": 25,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tca9535rtwr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4,
4,
0.77
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tca9535rtwr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4,
4,
0.77
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "387ba3b742659c7c12840ec22780ef150855716101e7e0163890dcfba27ed139",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "WQFN-24-EP(4x4)",
"Category": "Interface",
"Pins": "25"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"tca9535rtwr"
],
"discovery_pitch": "TCA9535RTWR (Texas Instruments) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tca9535rtwr.kicad_sym",
"tca9535rtwr.kicad_mod",
"tca9535rtwr.glb",
"tca9535rtwr.step",
"tca9535rtwr.lbr",
"docs/hero.png",
"docs/tca9535rtwr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"updated_at": "2026-09-25T09:26:02.770Z"
}