main
History Download
Ray Initial commit: component/tca9535rtwr 14e20d1

TCA9535RTWR

Texas Instruments · I/O Expanders · WQFN-24-EP(4x4)

TCA9535RTWR from Texas Instruments, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P00 bidirectional I/O port 0, bit 0; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on.
2 P01 bidirectional I/O port 0, bit 1; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on.
3 P02 bidirectional I/O port 0, bit 2; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on.
4 P03 bidirectional I/O port 0, bit 3; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on.
5 P04 bidirectional I/O port 0, bit 4; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on.
6 P05 bidirectional I/O port 0, bit 5; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on.
7 P06 bidirectional I/O port 0, bit 6; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on.
8 P07 bidirectional I/O port 0, bit 7; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on.
9 GND power_in Ground reference.
10 P10 bidirectional I/O port 1, bit 0; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on.
11 P11 bidirectional I/O port 1, bit 1; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on.
12 P12 bidirectional I/O port 1, bit 2; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on.
13 P13 bidirectional I/O port 1, bit 3; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on.
14 P14 bidirectional I/O port 1, bit 4; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on.
15 P15 bidirectional I/O port 1, bit 5; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on.
16 P16 bidirectional I/O port 1, bit 6; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on.
17 P17 bidirectional I/O port 1, bit 7; configurable as input or output via I2C; push-pull output with 5V tolerance; maximum 25 mA per pin; defaults to input at power-on.
18 A0 input Address input 0; connect directly to VCC or GND to program I2C device address; must not be left floating; used with A1 and A2 to select one of eight addresses.
19 SCL input I2C/SMBus serial clock input; connect to VCC through pull-up resistor; supports up to 400 kHz fast-mode operation.
20 SDA input I2C/SMBus serial data input; connect to VCC through pull-up resistor; open-drain design allows device to drive and release bus; supports up to 400 kHz fast-mode.
21 VCC power_in Supply voltage input; supports 1.65 V to 5.5 V operating range.
22 INT tri_state Open-drain interrupt output, active-low when any input state differs from Input Port register; requires external pull-up resistor to VCC (typically 10 kΩ).
23 A1 input Address input 1; connect directly to VCC or GND to program I2C device address; must not be left floating; used with A0 and A2 to select one of eight addresses.
24 A2 input Address input 2; connect directly to VCC or GND to program I2C device address; must not be left floating; used with A0 and A1 to select one of eight addresses.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-24-EP(4x4)
Category Interface
Pins 25

CAD (KiCad official)

  • Symbol: TCA9535RTWR
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm
  • 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: tca9535rtwr-etched.step / tca9535rtwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tca9535rtwr.step / tca9535rtwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 ccd86bad1cdf933f, retrieved 2026-09-18, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF