3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTCA9534ADWR
Texas Instruments · I/O Expanders · SOIC-16-300mil
TCA9534ADWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Address input that must be connected directly to VCC or ground. |
| 2 | A1 | input | Address input that must be connected directly to VCC or ground. |
| 3 | A2 | input | Address input that must be connected directly to VCC or ground. |
| 4 | P0 | bidirectional | Push-pull P-port input-output that is configured as an input at power on. |
| 5 | P1 | bidirectional | Push-pull P-port input-output that is configured as an input at power on. |
| 6 | P2 | bidirectional | Push-pull P-port input-output that is configured as an input at power on. |
| 7 | P3 | bidirectional | Push-pull P-port input-output that is configured as an input at power on. |
| 8 | GND | power_in | Ground. |
| 9 | P4 | bidirectional | Push-pull P-port input-output that is configured as an input at power on. |
| 10 | P5 | bidirectional | Push-pull P-port input-output that is configured as an input at power on. |
| 11 | P6 | bidirectional | Push-pull P-port input-output that is configured as an input at power on. |
| 12 | P7 | bidirectional | Push-pull P-port input-output that is configured as an input at power on. |
| 13 | INT | output | Interrupt output that must be connected to VCC through a pull-up resistor. |
| 14 | SCL | input | Serial clock bus that must be connected to VCC through a pull-up resistor. |
| 15 | SDA | bidirectional | Serial data bus that must be connected to VCC through a pull-up resistor. |
| 16 | VCC | power_in | Supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | 6 | V | 5 | ||
| Input voltage | VI | -0.5 | 6 | V | 5 | ||
| Output voltage | VO | -0.5 | 6 | V | 5 | ||
| Input clamp current | IIK | -20 | mA | VI < 0 | 5 | ||
| Output clamp current | IOK | -20 | mA | VO < 0 | 5 | ||
| Input-output clamp current | IIOK | -20 | 20 | mA | VO < 0 or VO > VCC | 5 | |
| Continuous output low current through a single P-port | IOL | 50 | mA | VO = 0 to VCC | 5 | ||
| Continuous output high current through a single P-port | IOH | -50 | mA | VO = 0 to VCC | 5 | ||
| Continuous current through GND by all P-ports, INT, and SDA | ICC | 250 | mA | 5 | |||
| Continuous current through VCC by all P-ports | ICC | -160 | mA | 5 | |||
| Maximum junction temperature | TJ(MAX) | 100 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Supply voltage | VCC | 1.65 | 5.5 | V | 5 | ||
| High-level input voltage A0, A1, A2, P7-P0 (min = 0.7 × VCC) | VIH | 5.5 | V | VCC = 1.65 V to 2.7 V | 5 | ||
| Low-level input voltage SCL, SDA (max = 0.3 × VCC) | VIL | -0.5 | V | VCC = 1.65 V to 5.5 V | 5 | ||
| Low-level input voltage A0, A1, A2, P7-P0 (max = 0.3 × VCC) | VIL | -0.5 | V | VCC = 1.65 V to 2.7 V | 5 | ||
| Low-level input voltage A0, A1, A2, P7-P0 (max = 0.2 × VCC) | VIL | -0.5 | V | VCC = 3 V to 5.5 V | 5 | ||
| High-level output current, any P-port P7-P0 | IOH | -10 | mA | 5 | |||
| Low-level output current, P00-P07, P10-P17 | IOL | 25 | mA | Tj ≤ 65°C | 5 | ||
| Low-level output current, P00-P07, P10-P17 | IOL | 18 | mA | Tj ≤ 85°C | 5 | ||
| Low-level output current, P00-P07, P10-P17 | IOL | 9 | mA | Tj ≤ 100°C | 5 | ||
| Low-level output current, INT, SDA | IOL | 6 | mA | Tj ≤ 85°C | 5 | ||
| Low-level output current, INT, SDA | IOL | 3 | mA | Tj ≤ 100°C | 5 | ||
| Continuous current through GND, all P-ports P7-P0, INT, and SDA | ICC | 200 | mA | 5 | |||
| Continuous current through VCC, all P-ports P7-P0 | ICC | -80 | mA | 5 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | 5 | ||
| Input diode clamp voltage | VIK | -1.2 | V | II = -18 mA, VCC = 1.65 V to 5.5 V | 6 | ||
| Power-on reset voltage, VCC rising | VPORR | 1.2 | 1.5 | V | VI = VCC or GND, IO = 0 | 6 | |
| Power-on reset voltage, VCC falling | VPORF | 0.75 | 1 | V | VI = VCC or GND, IO = 0 | 6 | |
| P-port high-level output voltage | VOH | 1.2 | V | IOH = -8 mA, VCC = 1.65 V | 6 | ||
| P-port high-level output voltage | VOH | 1.8 | V | IOH = -8 mA, VCC = 2.3 V | 6 | ||
| P-port high-level output voltage | VOH | 2.6 | V | IOH = -8 mA, VCC = 3 V | 6 | ||
| P-port high-level output voltage | VOH | 4.1 | V | IOH = -8 mA, VCC = 4.5 V | 6 | ||
| P-port high-level output voltage | VOH | 1 | V | IOH = -10 mA, VCC = 1.65 V | 6 | ||
| P-port high-level output voltage | VOH | 1.7 | V | IOH = -10 mA, VCC = 2.3 V | 6 | ||
| P-port high-level output voltage | VOH | 2.5 | V | IOH = -10 mA, VCC = 3 V | 6 | ||
| P-port high-level output voltage | VOH | 4 | V | IOH = -10 mA, VCC = 4.5 V | 6 | ||
| SDA low-level output sink current | IOL | 3 | mA | VOL = 0.4 V, VCC = 1.65 V to 5.5 V | 6 | ||
| P-port low-level output sink current | IOL | 8 | mA | VOL = 0.5 V, VCC = 1.65 V to 5.5 V | 6 | ||
| P-port low-level output sink current | IOL | 10 | mA | VOL = 0.7 V, VCC = 1.65 V to 5.5 V | 6 | ||
| INT low-level output sink current | IOL | 3 | mA | VOL = 0.4 V, VCC = 1.65 V to 5.5 V | 6 | ||
| Input leakage current SCL, SDA | II | -1 | 1 | μA | VI = VCC or GND, VCC = 1.65 V to 5.5 V | 6 | |
| Input leakage current A2-A0 | II | -1 | 1 | μA | VI = VCC or GND, VCC = 1.65 V to 5.5 V | 6 | |
| P-port high-level input leakage current | IIH | 1 | μA | VI = VCC, VCC = 1.65 V to 5.5 V | 6 | ||
| P-port low-level input leakage current | IIL | -1 | μA | VI = GND, VCC = 1.65 V to 5.5 V | 6 | ||
| Operating mode supply current | ICC | 22 | 40 | μA | VI = VCC or GND, IO = 0, I/O = inputs, fscl = 400 kHz, no load, VCC = 5.5 V | 6 | |
| Operating mode supply current | ICC | 11 | 30 | μA | VI = VCC or GND, IO = 0, I/O = inputs, fscl = 400 kHz, no load, VCC = 3.6 V | 7 | |
| Operating mode supply current | ICC | 8 | 19 | μA | VI = VCC or GND, IO = 0, I/O = inputs, fscl = 400 kHz, no load, VCC = 2.7 V | 7 | |
| Operating mode supply current | ICC | 5 | 11 | μA | VI = VCC or GND, IO = 0, I/O = inputs, fscl = 400 kHz, no load, VCC = 1.65 V | 7 | |
| Standby mode supply current | ICC | 1.5 | 3.9 | μA | VI = VCC, IO = 0, I/O = inputs, fscl = 0 kHz, no load, VCC = 5.5 V | 7 | |
| Standby mode supply current | ICC | 0.9 | 2.2 | μA | VI = VCC, IO = 0, I/O = inputs, fscl = 0 kHz, no load, VCC = 3.6 V | 7 | |
| Standby mode supply current | ICC | 0.6 | 1.8 | μA | VI = VCC, IO = 0, I/O = inputs, fscl = 0 kHz, no load, VCC = 2.7 V | 7 | |
| Standby mode supply current | ICC | 0.4 | 1.5 | μA | VI = VCC, IO = 0, I/O = inputs, fscl = 0 kHz, no load, VCC = 1.95 V | 7 | |
| Standby mode supply current | ICC | 1.5 | 8.7 | μA | VI = GND, IO = 0, I/O = inputs, fscl = 0 kHz, no load, VCC = 5.5 V | 7 | |
| Standby mode supply current | ICC | 0.9 | 4 | μA | VI = GND, IO = 0, I/O = inputs, fscl = 0 kHz, no load, VCC = 3.6 V | 7 | |
| Standby mode supply current | ICC | 0.6 | 3 | μA | VI = GND, IO = 0, I/O = inputs, fscl = 0 kHz, no load, VCC = 2.7 V | 7 | |
| Standby mode supply current | ICC | 0.4 | 2.2 | μA | VI = GND, IO = 0, I/O = inputs, fscl = 0 kHz, no load, VCC = 1.95 V | 7 | |
| SCL input capacitance | Ci | 3 | 8 | pF | VI = VCC or GND, 1.65 V to 5.5 V | 7 | |
| SDA input/output capacitance | Cio | 3 | 9.5 | pF | VIO = VCC or GND, 1.65 V to 5.5 V | 7 | |
| P-port input/output capacitance | 3.7 | 9.5 | pF | 7 |
CAD (KiCad official)
- Symbol:
TCA9534ADWR - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
tca9534adwr-etched.step/tca9534adwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tca9534adwr.step/tca9534adwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
0282b8fc3099affa, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).