main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tca6416apwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tca6416apwr: viewers · Ray
package.json tca6416apwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tca6416apwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tca6416apwr · Ray
tca6416apwr-etched.fit.json tca6416apwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tca6416apwr-etched.glb tca6416apwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tca6416apwr-etched.step tca6416apwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tca6416apwr.glb Publish 0.1.0 · Ray
tca6416apwr.kicad_mod Publish 0.1.0 · Ray
tca6416apwr.kicad_sym Publish 0.1.0 · Ray
tca6416apwr.lbr Publish 0.1.0 · Ray
tca6416apwr.step Publish 0.1.0 · Ray

TCA6416APWR

Texas Instruments · I/O Expanders · TSSOP-24

TCA6416APWR from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INT output Interrupt output with open-drain structure; connect to VCCI or VCCP through a pull-up resistor.
2 VCCI power_in Supply voltage of I2C bus; connect directly to the supply voltage of the external I2C controller.
3 RESET input Active-low reset input; connect to VCCI or VCCP through a pull-up resistor if no active connection is used.
4 P00 bidirectional P-port input/output with push-pull design structure; configured as input at power-on.
5 P01 bidirectional P-port input/output with push-pull design structure; configured as input at power-on.
6 P02 bidirectional P-port input/output with push-pull design structure; configured as input at power-on.
7 P03 bidirectional P-port input/output with push-pull design structure; configured as input at power-on.
8 P04 bidirectional P-port input/output with push-pull design structure; configured as input at power-on.
9 P05 bidirectional P-port input/output with push-pull design structure; configured as input at power-on.
10 P06 bidirectional P-port input/output with push-pull design structure; configured as input at power-on.
11 P07 bidirectional P-port input/output with push-pull design structure; configured as input at power-on.
12 GND power_in Ground.
13 P10 bidirectional P-port input/output with push-pull design structure; configured as input at power-on.
14 P11 bidirectional P-port input/output with push-pull design structure; configured as input at power-on.
15 P12 bidirectional P-port input/output with push-pull design structure; configured as input at power-on.
16 P13 bidirectional P-port input/output with push-pull design structure; configured as input at power-on.
17 P14 bidirectional P-port input/output with push-pull design structure; configured as input at power-on.
18 P15 bidirectional P-port input/output with push-pull design structure; configured as input at power-on.
19 P16 bidirectional P-port input/output with push-pull design structure; configured as input at power-on.
20 P17 bidirectional P-port input/output with push-pull design structure; configured as input at power-on.
21 ADDR input Address input; connect directly to VCCP or ground for I2C address selection.
22 SCL bidirectional Serial clock line for I2C bus; connect to VCCI through a pull-up resistor.
23 SDA bidirectional Serial data line for I2C bus; connect to VCCI through a pull-up resistor.
24 VCCP power_in Supply voltage of TCA6416A for P-ports.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-24
Category Interface
Pins 24

CAD (KiCad official)

  • Symbol: TCA6416APWR
  • Footprint: Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm
  • 3D model: TSSOP-24 (KiCad packages3D, STEP)
  • 3D model files: tca6416apwr-etched.step / tca6416apwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tca6416apwr.step / tca6416apwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (45 pp, sha256 a7deab846f35a9f1, retrieved 2026-09-24, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF