← Commit history

Initial commit: component/tca6416apwr

Ray ·507295b468 ·
2 files changed +297
README.mdadded+60
@@ -0,0 +1,60 @@+# TCA6416APWR++**Texas Instruments** · I/O Expanders · TSSOP-24++TCA6416APWR from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | INT | output | Interrupt output with open-drain structure; connect to VCCI or VCCP through a pull-up resistor. |+| 2 | VCCI | power_in | Supply voltage of I2C bus; connect directly to the supply voltage of the external I2C controller. |+| 3 | RESET | input | Active-low reset input; connect to VCCI or VCCP through a pull-up resistor if no active connection is used. |+| 4 | P00 | bidirectional | P-port input/output with push-pull design structure; configured as input at power-on. |+| 5 | P01 | bidirectional | P-port input/output with push-pull design structure; configured as input at power-on. |+| 6 | P02 | bidirectional | P-port input/output with push-pull design structure; configured as input at power-on. |+| 7 | P03 | bidirectional | P-port input/output with push-pull design structure; configured as input at power-on. |+| 8 | P04 | bidirectional | P-port input/output with push-pull design structure; configured as input at power-on. |+| 9 | P05 | bidirectional | P-port input/output with push-pull design structure; configured as input at power-on. |+| 10 | P06 | bidirectional | P-port input/output with push-pull design structure; configured as input at power-on. |+| 11 | P07 | bidirectional | P-port input/output with push-pull design structure; configured as input at power-on. |+| 12 | GND | power_in | Ground. |+| 13 | P10 | bidirectional | P-port input/output with push-pull design structure; configured as input at power-on. |+| 14 | P11 | bidirectional | P-port input/output with push-pull design structure; configured as input at power-on. |+| 15 | P12 | bidirectional | P-port input/output with push-pull design structure; configured as input at power-on. |+| 16 | P13 | bidirectional | P-port input/output with push-pull design structure; configured as input at power-on. |+| 17 | P14 | bidirectional | P-port input/output with push-pull design structure; configured as input at power-on. |+| 18 | P15 | bidirectional | P-port input/output with push-pull design structure; configured as input at power-on. |+| 19 | P16 | bidirectional | P-port input/output with push-pull design structure; configured as input at power-on. |+| 20 | P17 | bidirectional | P-port input/output with push-pull design structure; configured as input at power-on. |+| 21 | ADDR | input | Address input; connect directly to VCCP or ground for I2C address selection. |+| 22 | SCL | bidirectional | Serial clock line for I2C bus; connect to VCCI through a pull-up resistor. |+| 23 | SDA | bidirectional | Serial data line for I2C bus; connect to VCCI through a pull-up resistor. |+| 24 | VCCP | power_in | Supply voltage of TCA6416A for P-ports. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-24 |+| Category | Interface |+| Pins | 24 |++## CAD (KiCad official)++- Symbol: `TCA6416APWR`+- Footprint: `Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm`+- 3D model: TSSOP-24 (KiCad packages3D, STEP)+- 3D model files: `tca6416apwr-etched.step` / `tca6416apwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tca6416apwr.step` / `tca6416apwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tca6416a.pdf) (45 pp, sha256 `a7deab846f35a9f1`, retrieved 2026-09-24, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tca6416apwr-datasheet.pdf)
page.jsonadded+237
@@ -0,0 +1,237 @@+{+  "slug": "tca6416apwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments I/O Expanders, TSSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "tca6416apwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tca6416apwr.kicad_sym",+    "tca6416apwr.kicad_mod",+    "tca6416apwr.glb",+    "tca6416apwr.step",+    "tca6416apwr.lbr",+    "docs/hero.png",+    "docs/tca6416apwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TCA6416APWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-24",+    "pin_count": 24,+    "category": "Interface",+    "subcategory": "I/O Expanders",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tca6416a.pdf",+    "parts": {+      "symbol": "tca6416apwr.kicad_sym",+      "footprint": "tca6416apwr.kicad_mod",+      "model_3d": "tca6416apwr-etched.glb",+      "model_3d_plain": "tca6416apwr.glb",+      "model_3d_step": "tca6416apwr-etched.step",+      "model_3d_step_plain": "tca6416apwr.step",+      "lbr": "tca6416apwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C130203"+    },+    "pins": [+      {+        "number": "1",+        "name": "INT",+        "type": "output",+        "description": "Interrupt output with open-drain structure; connect to VCCI or VCCP through a pull-up resistor."+      },+      {+        "number": "2",+        "name": "VCCI",+        "type": "power_in",+        "description": "Supply voltage of I2C bus; connect directly to the supply voltage of the external I2C controller."+      },+      {+        "number": "3",+        "name": "RESET",+        "type": "input",+        "description": "Active-low reset input; connect to VCCI or VCCP through a pull-up resistor if no active connection is used."+      },+      {+        "number": "4",+        "name": "P00",+        "type": "bidirectional",+        "description": "P-port input/output with push-pull design structure; configured as input at power-on."+      },+      {+        "number": "5",+        "name": "P01",+        "type": "bidirectional",+        "description": "P-port input/output with push-pull design structure; configured as input at power-on."+      },+      {+        "number": "6",+        "name": "P02",+        "type": "bidirectional",+        "description": "P-port input/output with push-pull design structure; configured as input at power-on."+      },+      {+        "number": "7",+        "name": "P03",+        "type": "bidirectional",+        "description": "P-port input/output with push-pull design structure; configured as input at power-on."+      },+      {+        "number": "8",+        "name": "P04",+        "type": "bidirectional",+        "description": "P-port input/output with push-pull design structure; configured as input at power-on."+      },+      {+        "number": "9",+        "name": "P05",+        "type": "bidirectional",+        "description": "P-port input/output with push-pull design structure; configured as input at power-on."+      },+      {+        "number": "10",+        "name": "P06",+        "type": "bidirectional",+        "description": "P-port input/output with push-pull design structure; configured as input at power-on."+      },+      {+        "number": "11",+        "name": "P07",+        "type": "bidirectional",+        "description": "P-port input/output with push-pull design structure; configured as input at power-on."+      },+      {+        "number": "12",+        "name": "GND",+        "type": "power_in",+        "description": "Ground."+      },+      {+        "number": "13",+        "name": "P10",+        "type": "bidirectional",+        "description": "P-port input/output with push-pull design structure; configured as input at power-on."+      },+      {+        "number": "14",+        "name": "P11",+        "type": "bidirectional",+        "description": "P-port input/output with push-pull design structure; configured as input at power-on."+      },+      {+        "number": "15",+        "name": "P12",+        "type": "bidirectional",+        "description": "P-port input/output with push-pull design structure; configured as input at power-on."+      },+      {+        "number": "16",+        "name": "P13",+        "type": "bidirectional",+        "description": "P-port input/output with push-pull design structure; configured as input at power-on."+      },+      {+        "number": "17",+        "name": "P14",+        "type": "bidirectional",+        "description": "P-port input/output with push-pull design structure; configured as input at power-on."+      },+      {+        "number": "18",+        "name": "P15",+        "type": "bidirectional",+        "description": "P-port input/output with push-pull design structure; configured as input at power-on."+      },+      {+        "number": "19",+        "name": "P16",+        "type": "bidirectional",+        "description": "P-port input/output with push-pull design structure; configured as input at power-on."+      },+      {+        "number": "20",+        "name": "P17",+        "type": "bidirectional",+        "description": "P-port input/output with push-pull design structure; configured as input at power-on."+      },+      {+        "number": "21",+        "name": "ADDR",+        "type": "input",+        "description": "Address input; connect directly to VCCP or ground for I2C address selection."+      },+      {+        "number": "22",+        "name": "SCL",+        "type": "bidirectional",+        "description": "Serial clock line for I2C bus; connect to VCCI through a pull-up resistor."+      },+      {+        "number": "23",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Serial data line for I2C bus; connect to VCCI through a pull-up resistor."+      },+      {+        "number": "24",+        "name": "VCCP",+        "type": "power_in",+        "description": "Supply voltage of TCA6416A for P-ports."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 45,+        "cost_usd": 0.4306,+        "at": "2026-09-24T05:10:27"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/tca6416a.pdf",+        "pages": 45,+        "sha256": "a7deab846f35a9f1",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 24,+        "described": 24,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file